atmOamStatCCActivatorCorr
BIANCA-BRICK-ATM2-MIB ·
.1.3.6.1.4.1.272.4.16.14.1.22
Object
column
mandatory
Integer32
The correlation of the last CC activation message sent to the responder.
Context
- MIB
- BIANCA-BRICK-ATM2-MIB
- OID
.1.3.6.1.4.1.272.4.16.14.1.22- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- atmOamStatEntry
- Table
- atmOamStatTable
- Siblings
- 25
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmOamStatAtmIfIndex mandatory The interface index of the associated ATM hardware. | column | Integer32 | .1.3.6.1.4.1.272.4.16.14.1.1 |
| atmOamStatAisState mandatory The AIS state is set to on(2) after receiving an AIS cell
or detection of LOC (Loss of Continuity). The Ais state is
set to off(1) either when receiving user cells
(same VCC conte… | column | Enumeration | .1.3.6.1.4.1.272.4.16.14.1.10 |
| atmOamStatAisTxCells mandatory The number of OAM alarm indication signal (AIS) cells
that have been transmitted since last change of AisState. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.11 |
| atmOamStatAisRxCells mandatory The number of OAM alarm indication signal (AIS) cells
that have been received since last change of AisState. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.12 |
| atmOamStatTotalAisTxCells mandatory The total number of OAM alarm indication signal (AIS) cells
that have been transmitted. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.13 |
| atmOamStatTotalAisRxCells mandatory The total number of OAM alarm indication signal (AIS) cells
that have been received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.14 |
| atmOamStatRdiState mandatory The RDI state is set to on(2) after receiving a RDI cell.
The RDI state is to off(1) via timeout. | column | Enumeration | .1.3.6.1.4.1.272.4.16.14.1.15 |
| atmOamStatRdiTxCells mandatory The number of OAM remote defect indication (RDI) cells
that have been transmitted since last change of RdiState. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.16 |
| atmOamStatRdiRxCells mandatory The number of OAM remote defect indication (RDI) cells
that have been received since last change of RdiState. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.17 |
| atmOamStatTotalRdiTxCells mandatory The totoal number of OAM remote defect indication (RDI) cells
that have been transmitted. | column | Integer32 | .1.3.6.1.4.1.272.4.16.14.1.18 |
| atmOamStatTotalRdiRxCells mandatory The total number of OAM remote defect indication (RDI) cells
that have been received. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.19 |
| atmOamStatVpi mandatory The VPI value of this Virtual Path Connection. | column | Integer32 | .1.3.6.1.4.1.272.4.16.14.1.2 |
| atmOamStatCCActivatorState mandatory The status of the initiated CC negotiation, inactive(1)
is the initial status, wait-act-con(2) is set after
sending an CC activation request, active(3) is reached
after receiving … | column | Enumeration | .1.3.6.1.4.1.272.4.16.14.1.20 |
| atmOamStatCCActivatorDirection mandatory The direction of action indicated by a received CC activation
confirmation, source(1) correlates with 'A-B', sink(2) with
'B-A' and both(3) with 'A-B' and 'B-A'. | column | Enumeration | .1.3.6.1.4.1.272.4.16.14.1.21 |
| atmOamStatCCResponderState mandatory The status of the passive CC negotiation, inactive(1)
is the initial status, active(3) is reached after receiving
an CC activation request whereas wait-deact-con(4) is used
to ind… | column | Enumeration | .1.3.6.1.4.1.272.4.16.14.1.23 |
| atmOamStatCCResponderDirection mandatory The direction of action indicated by a received CC activation
request, source(1) correlates with 'B-A', sink(2) with
'A-B' and both(3) with 'A-B' and 'B-A'. | column | Enumeration | .1.3.6.1.4.1.272.4.16.14.1.24 |
| atmOamStatCCResponderCorr mandatory The correlation of the received CC activation message. | column | Integer32 | .1.3.6.1.4.1.272.4.16.14.1.25 |
| atmOamStatCCTxCells mandatory The number of OAM continuity check cells
that have been sent to the target in this sequence. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.26 |
| atmOamStatCCRxCells mandatory The number of OAM continuity check cells
that have been received from the target in this sequence. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.27 |
| atmOamStatVci mandatory The VCI value of this Virtual Channel Connection. | column | Integer32 | .1.3.6.1.4.1.272.4.16.14.1.3 |
| atmOamStatFlowType mandatory The OAM hierarchical flow levels: see ITU I.610 | column | Enumeration | .1.3.6.1.4.1.272.4.16.14.1.4 |
| atmOamStatLoopbackTxCells mandatory The number of OAM loopback cells that have been sent
to the target in this sequence. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.6 |
| atmOamStatLoopbackRxCells mandatory The number of OAM loopback cells that have been received
from the target in this sequence. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.7 |
| atmOamStatLoopbackPending mandatory The number of currently outstanding OAM loopback responses. | column | RFC1155-SMICounter | .1.3.6.1.4.1.272.4.16.14.1.8 |
| atmOamStatLoopbackCorr mandatory The correlation of the last sent loopback message. | column | Integer32 | .1.3.6.1.4.1.272.4.16.14.1.9 |