AVAYA-SURV-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
118

avSurvStationTable

table
.1.3.6.1.4.1.6889.2.6.4.2 · 1 row entry · 12 columns
Open in standard view 
Station Table
avSurvStationEntry entry .1.3.6.1.4.1.6889.2.6.4.2.1
Each entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name
Indexes
avSurvStationIndex
Column Syntax OID
avSurvStationIndex
Station Table Index
Integer32r/w
Constraints:
range: 1-340
 .1.3.6.1.4.1.6889.2.6.4.2.1.1
avSurvStationExt
Station Extension number
OctetStringr/w
Constraints:
range: 1-13
 .1.3.6.1.4.1.6889.2.6.4.2.1.2
avSurvStationType
Station model type
Enumerationr/w
Enumerated Values:
1ip4601
2ip4602
3ip4602Sw
4ip4606
5ip4610Sw
6ip4612
7ip4620
8ip4620Sw
9ip4624
10analog2500
11ip4621
12ip4622
13ip4625
20dcp2402
21dcp2410
22dcp2420
30dcp6402
31dcp6402D
32dcp6408
33dcp6408plus
34dcp6408D
35dcp6408Dplus
36dcp6416Dplus
37dcp6424Dplus
40dcp8403B
41dcp8405B
42dcp8405Bplus
43dcp8405D
44dcp8405Dplus
45dcp8410B
46dcp8410D
47dcp8411B
48dcp8411D
49dcp8434D
 .1.3.6.1.4.1.6889.2.6.4.2.1.3
avSurvStationInterfaceIndex
Interface Index bit map. Bit assignment as follows: bits 0-7 = port,
bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type.
Note: This element has been deprecated in SLS R4.1. For legacy stations,
use avSurvSt…
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6889.2.6.4.2.1.4
avSurvStationCOR
Station Class of Outgoing Restriction (COR) level
Enumerationr/w
Enumerated Values:
1emergency
2internal
3local
4toll
5unrestricted
 .1.3.6.1.4.1.6889.2.6.4.2.1.5
avSurvStationTrunkDest
Station trunk destination. Can be used to answer incomming trunk calls
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6889.2.6.4.2.1.6
avSurvStationRowStatus
Create/Delete a row entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.2.1.7
avSurvStationExpansionModule
Station set has an expansion module in place. This is only
allowed for the digital phones (IP and DCP.
IP phone models 4620, 4621, 4625 may use EU24 and EU24BL.
DCP phone models 2420 may use EU24 and EU24BL.
DCP p…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6889.2.6.4.2.1.8
avSurvStationSlotPort
CM slot/port in the Vyxx format
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.6889.2.6.4.2.1.9
avSurvStationSwitchHookFlash
Switchhook flash is allowed only for analog phones
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6889.2.6.4.2.1.10
avSurvStationIpAddressRegistered
IP address of registered IP station. Note only for IP stations
OctetString
Constraints:
range: 1-4
 .1.3.6.1.4.1.6889.2.6.4.2.1.11
avSurvStationName
Station or user's Name
OctetStringr/w
Constraints:
range: 0-27
 .1.3.6.1.4.1.6889.2.6.4.2.1.12

avSurvTrunkGroupTable

table
.1.3.6.1.4.1.6889.2.6.4.3 · 1 row entry · 26 columns
Open in standard view 
Trunk Group Table
avSurvTrunkGroupEntry entry .1.3.6.1.4.1.6889.2.6.4.3.1
Each entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode
Indexes
avSurvTrunkGroupNum
Column Syntax OID
avSurvTrunkGroupNum
Trunk Group Number
Integer32r/w
Constraints:
range: 1-2000
 .1.3.6.1.4.1.6889.2.6.4.3.1.1
avSurvTrunkGroupType
Trunk Group Type
Enumerationr/w
Enumerated Values:
1analogLoopStart
2analogDid
3analogGroundStart
4bri
5t1InBandSignaling
6t1IsdnSignaling
7e1InBandSignaling
8e1IsdnSignaling
 .1.3.6.1.4.1.6889.2.6.4.3.1.2
avSurvTrunkGroupTAC
Trunk Group Trunk Access Code (TAC)
OctetStringr/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.6889.2.6.4.3.1.3
avSurvTrunkGroupDial
Trunk Group Outward Dial. Note MF not supported in SLS
Enumerationr/w
Enumerated Values:
1rotary
2dtmf
3mf
 .1.3.6.1.4.1.6889.2.6.4.3.1.4
avSurvTrunkGroupRowStatus
Create/Delete a row entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.3.1.5
avSurvTrunkGroupDidDigitTreatment
Trunk Group DID digit treatment option.
This applies for analog DID trunks and non-ISDN digital tie trunks.
Note: blank means take no action.
Enumerationr/w
Enumerated Values:
1absorb1
2absorb2
3absorb3
4absorb4
5absorb5
11insert1
12insert2
13insert3
14insert4
99blank
 .1.3.6.1.4.1.6889.2.6.4.3.1.6
avSurvTrunkGroupDidDigitsInsert
Digit string to be inserted for DID treatment
This applies for analog DID trunks and non-ISDN digital tie trunks.
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.6889.2.6.4.3.1.7
avSurvTrunkGroupDidSupervision
Type of incoming supervision used on DID trunk.
This applies only for analog DID trunks.
Enumerationr/w
Enumerated Values:
1immediate
2wink
 .1.3.6.1.4.1.6889.2.6.4.3.1.8
avSurvTrunkGroupName
Customer's name for trunk group
OctetStringr/w
Constraints:
range: 0-27
 .1.3.6.1.4.1.6889.2.6.4.3.1.9
avSurvTrunkGroupCodesetDisplay
Which Q.931 codesets are allowed to send Display IE's to the user phones
This applies only to ISDN BRI/PRI trunks.
Enumerationr/w
Enumerated Values:
0codeset0
6codeset6
7codeset7
 .1.3.6.1.4.1.6889.2.6.4.3.1.10
avSurvTrunkGroupCodesetNational
Which codesets are allowed to send National supported IE's.
This applies only to ISDN BRI/PRI trunks.
Enumerationr/w
Enumerated Values:
6codeset6
7codeset7
 .1.3.6.1.4.1.6889.2.6.4.3.1.11
avSurvTrunkGroupChannelPreference
Used for encoding Channel-ID IE.
This applies only to ISDN BRI/PRI trunks.
Enumerationr/w
Enumerated Values:
1exclusive
2preferred
 .1.3.6.1.4.1.6889.2.6.4.3.1.12
avSurvTrunkGroupDigitHandling
Defines overlap receiving and transmitting rules.
This applies only to ISDN BRI/PRI trunks.
Enumerationr/w
Enumerated Values:
0enblocEnbloc
1enblocOverlap
2overlapEnbloc
3overlapOverlap
 .1.3.6.1.4.1.6889.2.6.4.3.1.13
avSurvTrunkGroupJapanDisconnect
Send a Q.931 CONNECT msg right before sending DISCONNECT msg.
This applies only to ISDN BRI/PRI trunks in Japan.
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6889.2.6.4.3.1.14
avSurvTrunkGroupSendName
Specifies whether Calling, Connected, Called party's name
is to be shared with network.
This applies only to ISDN BRI/PRI trunks.
Default is no.
Enumerationr/w
Enumerated Values:
1yes
2no
3restricted
 .1.3.6.1.4.1.6889.2.6.4.3.1.15
avSurvTrunkGroupSendCallingNumber
Specifies how to fill the Calling-Party and Called-Party IE fields.
This applies only to ISDN BRI/PRI trunks.
Default is no.
Enumerationr/w
Enumerated Values:
1yes
2no
3restricted
 .1.3.6.1.4.1.6889.2.6.4.3.1.16
avSurvTrunkGroupNumberingFormat
Specifies how to fill the Calling-Party and Called-Party IE fields.
This applies only to ISDN BRI/PRI trunks.
SLS only supports unknown(1) and public(2). Default is unknown.
Enumerationr/w
Enumerated Values:
1unknown
2public
3private
4unknownPrivate
 .1.3.6.1.4.1.6889.2.6.4.3.1.17
avSurvTrunkGroupIncomingDestination
Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls
OctetStringr/w
Constraints:
range: 0-13
 .1.3.6.1.4.1.6889.2.6.4.3.1.18
avSurvTrunkGroupIncomingDialTone
Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6889.2.6.4.3.1.19
avSurvTrunkGroupR2MFCSignaling
Determines MFC signaling set to be used.
This only applies to R2MFC trunks.
This feature not supported in SLS for R4.0
Enumerationr/w
Enumerated Values:
1set1
2set2
3set3
4set4
5set5
6set6
7set7
8set8
 .1.3.6.1.4.1.6889.2.6.4.3.1.20
avSurvTrunkGroupTrunkHunt
Determines the method in which the SLS call engine selects from
the trunk group pool of available trunks.
This only applies to digital trunks.
Enumerationr/w
Enumerated Values:
1ascend
2cyclical
3descend
 .1.3.6.1.4.1.6889.2.6.4.3.1.21
avSurvTrunkGroupDs1Supervision
Applies to non-ISDN DS1 trunks: Specifies the type
of incomming/outgoing supervision that is used on these trunks.
Enumerationr/w
Enumerated Values:
3loopStart
4groundStart
5winkWink
6winkImmediate
7winkAuto
8immediateImmediate
9autoAuto
10autoWink
 .1.3.6.1.4.1.6889.2.6.4.3.1.22
avSurvTrunkGroupCbc
Applies to ISDN DS1 trunks: Specifies whether the trunk is to
operate in call-by-call basis. If yes, then send the NSF IE.
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6889.2.6.4.3.1.23
avSurvTrunkGroupCbcServiceFeature
Applies to ISDN DS1 trunks: Specifies the type of service
or feature specifed in the NSF IE for outbound trunk calls.
Only valid if CBC=yes.
Enumerationr/w
Enumerated Values:
197operator
198suboperator
225sdn
227megacom
231lds
246scocs
 .1.3.6.1.4.1.6889.2.6.4.3.1.24
avSurvTrunkGroupCbcParameter
Applies to ISDN DS1 trunks: Specifies the class of
service being offered as part of Selective Class of
Call Selection (scocs)service mode.
Only valid if service mode is scocs.
Integer32r/w
Constraints:
range: 0-99999
 .1.3.6.1.4.1.6889.2.6.4.3.1.25
avSurvTrunkGroupBusyDisconnect
Applies to Analog Loop Start Trunks: Specifies whether
the presence of busy tone signal will cause the
trunk call to be disconnected. Default = no.
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6889.2.6.4.3.1.26

avSurvTrunkTable

table
.1.3.6.1.4.1.6889.2.6.4.4 · 1 row entry · 6 columns
Open in standard view 
Trunk table
avSurvTrunkEntry entry .1.3.6.1.4.1.6889.2.6.4.4.1
Each entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number
Indexes
avSurvTrunkGroupRefNumber avSurvTrunkIndex
Column Syntax OID
avSurvTrunkGroupRefNumber
Trunk Pool Group Reference Number - Association of trunk pool
with trunk group
Integer32r/w
Constraints:
range: 1-2000
 .1.3.6.1.4.1.6889.2.6.4.4.1.1
avSurvTrunkIndex
trunk table index
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.6889.2.6.4.4.1.2
avSurvTrunkInterfaceIndex
Interface Index bit map. Bit assignment as follows: bits 0-7 = port,
bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type
Note: This element has been deprecated in SLS R4.1. For legacy trunks,
use avSurvTrunk…
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.6889.2.6.4.4.1.3
avSurvTrunkRowStatus
Create/Delete a row entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.4.1.4
avSurvTrunkSlotPort
ACM slot/port in the Vyxx format
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.6889.2.6.4.4.1.5
avSurvTrunkSigGroupRefNumber
Signaling Group Number that is the manager of this ISDN trunk member
Integer32r/w
Constraints:
range: 1-650
 .1.3.6.1.4.1.6889.2.6.4.4.1.6

avSurvArsTable

table
.1.3.6.1.4.1.6889.2.6.4.5 · 1 row entry · 10 columns
Open in standard view 
Automatic Route Selection (ARS) Table
avSurvArsEntry entry .1.3.6.1.4.1.6889.2.6.4.5.1
Each entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length
Indexes
avSurvDialIndex
Column Syntax OID
avSurvDialIndex
Call Pattern index
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.6889.2.6.4.5.1.1
avSurvDialString
Dialed string entry that is used to match a pattern
within the user-dialed number
OctetStringr/w
Constraints:
range: 1-18
 .1.3.6.1.4.1.6889.2.6.4.5.1.2
avSurvDialType
Call Type
Enumerationr/w
Enumerated Values:
1emergency
2foreignNumberingPlanArea
3homeNumberingPlanArea
4international
5internationalOperator
6local
7national
8operator
9service
 .1.3.6.1.4.1.6889.2.6.4.5.1.3
avSurvDialMaximumLength
Maximum length of the user-dialed number that the survivability
call-engine collects to match to the dialed-string.
By default, the minimum length is defined to be equal to
the length of the dialed string
Integer32r/w
Constraints:
range: 1-28
 .1.3.6.1.4.1.6889.2.6.4.5.1.4
avSurvDialGroupRefNumber
Call group reference number
Integer32r/w
Constraints:
range: 1-2000
 .1.3.6.1.4.1.6889.2.6.4.5.1.5
avSurvDialAction
Call dial action
Enumerationr/w
Enumerated Values:
1denyCall
2allowCall
 .1.3.6.1.4.1.6889.2.6.4.5.1.6
avSurvDialRowStatus
Create/Delete a row entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.5.1.7
avSurvDialDeleteDigits
Specifies the number of dialed digits to be deleted from
the beginning of the string
Integer32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.6889.2.6.4.5.1.8
avSurvDialInsertDigits
Specifies the digit string to be inserted. Includes ',' for pause.
OctetStringr/w
Constraints:
range: 0-36
 .1.3.6.1.4.1.6889.2.6.4.5.1.9
avSurvDialMinimumLength
Minimum length of the user-dialed number that the survivability
call-engine collects to match to the dialed-string.
By default, the minimum length is defined to be equal to
the length of the avSurvDialString element
Integer32r/w
Constraints:
range: 1-28
 .1.3.6.1.4.1.6889.2.6.4.5.1.10

avSurvFacTable

table
.1.3.6.1.4.1.6889.2.6.4.6 · 1 row entry · 4 columns
Open in standard view 
Automatic Route Selection Facility Table
avSurvFacEntry entry .1.3.6.1.4.1.6889.2.6.4.6.1
Each entry contains index, an ARS Facility dialing code and the Type of FAC feature
Indexes
avSurvFacIndex
Column Syntax OID
avSurvFacIndex
Fac Index
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.6889.2.6.4.6.1.1
avSurvFacId
ARS Facility dialing code
OctetStringr/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.6889.2.6.4.6.1.2
avSurvFacRowStatus
Create/Delete a row entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.6.1.3
avSurvFacType
Feature Access Code(FAC) dial codes Supported
Enumerationr/w
Enumerated Values:
1ars1
2ars2
3hold
4contactOpen
5contactClose
6contactPulse
 .1.3.6.1.4.1.6889.2.6.4.6.1.4

avSurvIpVoiceCodecSetTable

table
.1.3.6.1.4.1.6889.2.6.4.7 · 1 row entry · 7 columns
Open in standard view 
Ip Voice Codec Set Table
avSurvIpVoiceCodecSetEntry entry .1.3.6.1.4.1.6889.2.6.4.7.1
Each entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames
Indexes
avSurvIpVoiceCodecSetNum avSurvIpVoiceCodecSetIndex
Column Syntax OID
avSurvIpVoiceCodecSetNum
Ip Codec Set Identification
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.6889.2.6.4.7.1.1
avSurvIpVoiceCodecSetIndex
Ip Codec Index
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.6889.2.6.4.7.1.2
avSurvIpVoiceCodecSetPriority
Priority of codec set type (determines preferential use)
Integer32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.6889.2.6.4.7.1.3
avSurvIpVoiceCodecSetType
Ip Codec Type
Enumerationr/w
Enumerated Values:
1g711u
2g711a
3g723
4g729
5g729a
6g729b
7g729ab
 .1.3.6.1.4.1.6889.2.6.4.7.1.4
avSurvIpVoiceCodecSetSilence
IP Codec Silence Suppression
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6889.2.6.4.7.1.5
avSurvIpVoiceCodecSetFrames
IP Codec number of frames
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.6889.2.6.4.7.1.6
avSurvIpVoiceCodecSetRowStatus
Create/Delete a row entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.7.1.7

avSurvSlotConfigTable

table
.1.3.6.1.4.1.6889.2.6.4.9 · 1 row entry · 4 columns
Open in standard view 
Slot Configuration Table
avSurvSlotConfigEntry entry .1.3.6.1.4.1.6889.2.6.4.9.1
Each entry contains an index, number id, board type, and row status
Indexes
avSurvSlotConfigIndex
Column Syntax OID
avSurvSlotConfigIndex
Slot Config Table Index
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.6889.2.6.4.9.1.1
avSurvSlotConfigNumberId
This is the string identifier that CM uses to identify the slot
of the media gateway. The first character is defined as a v
followed by one decimal number, e.g. v1
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.6889.2.6.4.9.1.2
avSurvSlotConfigBoardType
Type of media module in the associated slot
mm312 has 24 low-density DCP station ports
mm710 has one DS1 interface
mm711 has 8 port universal analog
mm712 has 8 DCP station ports
mm714 has 4 analog trunk ports and 4 ana…
Enumerationr/w
Enumerated Values:
2mm720
3mm712
4mm711
5mm710
7mm714
8mm722
9anaImm1t2l
14mm717
16anaImm4t2l
17briImm
18dcpImm
19ds1Imm
22mm716
23tgm550
24tim514
25tim510
26tim521
29tim508
30tim516
31tim518
32mm312
 .1.3.6.1.4.1.6889.2.6.4.9.1.3
avSurvSlotConfigRowStatus
Create/Delete a row entry in this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.9.1.4

avSurvDs1Table

table
.1.3.6.1.4.1.6889.2.6.4.10 · 1 row entry · 15 columns
Open in standard view 
DS1 trunk instantiation Table
avSurvDs1Entry entry .1.3.6.1.4.1.6889.2.6.4.10.1
Each entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id.
Indexes
avSurvDs1Index
Column Syntax OID
avSurvDs1Index
DS1 Table Index
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.6889.2.6.4.10.1.1
avSurvDs1Name
Name of the service provider and/or site destination of DS1 facility
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6889.2.6.4.10.1.2
avSurvDs1BitRate
Maximum transmission rate for DS1 interface
Enumerationr/w
Enumerated Values:
1rate1544
2rate2048
 .1.3.6.1.4.1.6889.2.6.4.10.1.3
avSurvDs1SignalingMode
Selects the signaling method deployed on the given DS1 facility
Enumerationr/w
Enumerated Values:
1cas
2robbedBit
3isdnPri
4isdnExt
 .1.3.6.1.4.1.6889.2.6.4.10.1.4
avSurvDs1ChannelNumbering
Channel numbering scheme;
E1 interface for ETSI and QSIG requires sequential encoding from
1 to 30
Enumerationr/w
Enumerated Values:
1sequential
2timeSlot
 .1.3.6.1.4.1.6889.2.6.4.10.1.5
avSurvDs1Connect
Specifies what type of equipment is at the far end of the DS1 link
Enumerationr/w
Enumerated Values:
1host
2network
3pbx
4lineSide
 .1.3.6.1.4.1.6889.2.6.4.10.1.6
avSurvDs1Interface
Determines glare handling
Enumerationr/w
Enumerated Values:
0user
1network
3peerMaster
4peerSlave
 .1.3.6.1.4.1.6889.2.6.4.10.1.7
avSurvDs1Side
QSIG glare handling when interface field is peerSlave
Enumerationr/w
Enumerated Values:
0a
1b
 .1.3.6.1.4.1.6889.2.6.4.10.1.8
avSurvDs1CountryProtocol
Specifies the Layer 3 signaling protocol used by the
country-specific service provider.
This applies to ISDN trunk.
Enumerationr/w
Enumerated Values:
1country1
2country2
3country3
4country4
5country5
6country6
7country7
8country8
9country9
10country10
11country11
12country12
13country13
14country14
15country15
16country16
17country17
18country18
19country19
20country20
21country21
22country22
23country23
24country24
25country25
62etsi
63qsig
 .1.3.6.1.4.1.6889.2.6.4.10.1.9
avSurvDs1ProtocolVersion
Used in countries whose public networks allow multiple Layer-3
signaling protocols for ISDN PRI service.
Enumerationr/w
Enumerated Values:
0a
1b
2c
3d
 .1.3.6.1.4.1.6889.2.6.4.10.1.10
avSurvDs1BearerCapability
Sets the information transfer capability in the Bearer Capability
IE of SETUP message for ISDN PRI service.
Enumerationr/w
Enumerated Values:
0threeKhz
1speech
 .1.3.6.1.4.1.6889.2.6.4.10.1.11
avSurvDs1InterfaceCompanding
Specifies the companding method used by the far-end switch
Enumerationr/w
Enumerated Values:
1alaw
2ulaw
 .1.3.6.1.4.1.6889.2.6.4.10.1.12
avSurvDs1LongTimer
Specifies whether the duration of the T302 and T303 Q.931 timers
should be extended to a longer duration. Used for Russia country
code
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.6889.2.6.4.10.1.13
avSurvDs1RowStatus
Create/Delete a row entry in this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.10.1.14
avSurvDs1SlotNumberId
This is the string identifier that CM uses to identify the slot
of the media gateway. The first character is defined as a v
followed by one decimal number, e.g. v1
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.6889.2.6.4.10.1.15

avSurvSigGroupTable

table
.1.3.6.1.4.1.6889.2.6.4.11 · 1 row entry · 5 columns
Open in standard view 
Signaling Group, associated with an ISDN trunk group, Table
avSurvSigGroupEntry entry .1.3.6.1.4.1.6889.2.6.4.11.1
Each entry contains an index, channel selection, associated signaling, primary D channel, and row status
Indexes
avSurvSigGroupIndex
Column Syntax OID
avSurvSigGroupIndex
SigGroup Table Index
Integer32r/w
Constraints:
range: 1-650
 .1.3.6.1.4.1.6889.2.6.4.11.1.1
avSurvSigGroupChannelSelection
If there is more than one trunk group assigned to this signaling
group, the channel selection number is the trunk group that can
accept incoming calls
Integer32r/w
Constraints:
range: 1-2000
 .1.3.6.1.4.1.6889.2.6.4.11.1.2
avSurvSigGroupAssociatedSignaling
Specifies whether the D-channel is physically associated in the
DS1 facility, yes = D-channel present
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6889.2.6.4.11.1.3
avSurvSigGroupPrimaryDChannel
The identity for the D-channel 3 digit gw number + 2 character
slot number + 2 digit port circuit number
OctetStringr/w
Constraints:
range: 7-7
 .1.3.6.1.4.1.6889.2.6.4.11.1.4
avSurvSigGroupRowStatus
Create/Delete a row entry in this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.11.1.5

avSurvBriTable

table
.1.3.6.1.4.1.6889.2.6.4.12 · 1 row entry · 16 columns
Open in standard view 
BRI trunk instantiation Table
avSurvBriEntry entry .1.3.6.1.4.1.6889.2.6.4.12.1
Each entry contains an index, name, interface, side, country-protocol,
bearer-capability, interface-companding, tei-assignment, directory-numberA,
directory-numberB, spidA, spidB, endpoint-initialization,
layer1-stabl…
Indexes
avSurvBriIndex
Column Syntax OID
avSurvBriIndex
BRI Table Index
Note: G250-BRI supports 2 ports (4-channels)
G350/IG550 is allocated a max of 24 ports (48-channels)
G430/G450 is allocated a max of 64 ports (128 channels).
Integer32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.6889.2.6.4.12.1.1
avSurvBriName
Name of the service provider and/or site destination of BRI facility
OctetStringr/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6889.2.6.4.12.1.2
avSurvBriInterface
Determines glare handling. Non-QSIG calls: a-network, b-user;
QSIG calls: a-peerMaster, b-peerSlave
Enumerationr/w
Enumerated Values:
0user
1network
3peerMaster
4peerSlave
 .1.3.6.1.4.1.6889.2.6.4.12.1.3
avSurvBriSide
QSIG glare handling when interface field is peerSlave
Enumerationr/w
Enumerated Values:
0a
1b
 .1.3.6.1.4.1.6889.2.6.4.12.1.4
avSurvBriCountryProtocol
Specifies the Layer 3 signaling protocol used by the
country-specific service provider
Enumerationr/w
Enumerated Values:
1country1
2country2
3country3
4country4
5country5
6country6
7country7
8country8
9country9
10country10
11country11
12country12
13country13
14country14
15country15
16country16
17country17
18country18
19country19
20country20
21country21
22country22
23country23
24country24
25country25
62etsi
63qsig
 .1.3.6.1.4.1.6889.2.6.4.12.1.5
avSurvBriBearerCapability
Sets the information transfer capability in the Bearer Capability
IE of SETUP message
Enumerationr/w
Enumerated Values:
0threeKhz
1speech
 .1.3.6.1.4.1.6889.2.6.4.12.1.6
avSurvBriInterfaceCompanding
Specifies the companding method used )for all circuits on this
media module) by the far-end switch
Enumerationr/w
Enumerated Values:
1alaw
2ulaw
 .1.3.6.1.4.1.6889.2.6.4.12.1.7
avSurvBriTeiAssignment
LAPD address assignment for TEI field, auto is assigned by
network provider
Enumerationr/w
Enumerated Values:
1auto
2zero
 .1.3.6.1.4.1.6889.2.6.4.12.1.8
avSurvBriDirectoryNumberA
Channel B1's directory number
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.6889.2.6.4.12.1.9
avSurvBriDirectoryNumberB
Channel B2's directory number
OctetStringr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.6889.2.6.4.12.1.10
avSurvBriSpidA
Service Provider Identifier required for Country Code 1 (USA)
to be associated with channel B1
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.6889.2.6.4.12.1.11
avSurvBriSpidB
Service Provider Identifier required for Country Code 1 (USA)
to be associated with channel B2
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.6889.2.6.4.12.1.12
avSurvBriEndpointInit
Determines whether the far end supports endpoint initialization
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6889.2.6.4.12.1.13
avSurvBriLayer1Stable
Determines whether to expect the network to drop BRI layer 1
when no calls are active.
yes = keep layer 1 stable
Enumerationr/w
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.6889.2.6.4.12.1.14
avSurvBriRowStatus
Create/Delete a row entry in this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.12.1.15
avSurvBriSlotPortNumberId
This is the string identifier formed by the combination of the slot identifier that CM uses
to identify the slot of the media gateway(first character is a v followed by one numeric
character). The port consists of two n…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.6889.2.6.4.12.1.16

avSurvIncomingRoutingTable

table
.1.3.6.1.4.1.6889.2.6.4.13 · 1 row entry · 8 columns
Open in standard view 
Incoming Routing Table
avSurvIncomingRoutingEntry entry .1.3.6.1.4.1.6889.2.6.4.13.1
Each entry contains a dual index(trunk-group-reference-number and
table index), match-pattern, delete-digits, insert-digits specification
and routing-mode.
This table instantiation completely specifies an the digit h…
Indexes
avSurvIncomingRoutingGroupRefNumber avSurvIncomingRoutingIndex
Column Syntax OID
avSurvIncomingRoutingGroupRefNumber
Incoming trunk-group reference number
Integer32r/w
Constraints:
range: 1-2000
 .1.3.6.1.4.1.6889.2.6.4.13.1.1
avSurvIncomingRoutingIndex
Incoming Routing Table Index
Integer32r/w
Constraints:
range: 1-50
 .1.3.6.1.4.1.6889.2.6.4.13.1.2
avSurvIncomingRoutingMatchPattern
Dial-string entry that is used to match a pattern on inbound
trunk calls. Note that '0' is used to designate the blank
or empty string value as a wild card match.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.6889.2.6.4.13.1.3
avSurvIncomingRoutingLength
Maximum length of the user-dialed number that the SLS call-engine
collects before beginning the pattern matching. Note that CM uses
the blank as a wild card, subject to rule of the MatchPattern
field being set to a wil…
Enumerationr/w
Enumerated Values:
0len0
1len1
2len2
3len3
4len4
5len5
6len6
7len7
8len8
9len9
10len10
11len11
12len12
13len13
14len14
15len15
16len16
17len17
18len18
19len19
20len20
21len21
99blank
 .1.3.6.1.4.1.6889.2.6.4.13.1.4
avSurvIncomingRoutingDeleteDigits
Specifies the number of dialed digits to be deleted from
the beginning of the incoming trunk's received digit string
Integer32r/w
Constraints:
range: 0-21
 .1.3.6.1.4.1.6889.2.6.4.13.1.5
avSurvIncomingRoutingInsertDigits
Specifies the digit string to be inserted (after the deletion
process has been completed) to the incoming trunk digit string
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.6889.2.6.4.13.1.6
avSurvIncomingRoutingMode
Defines overlap receiving and transmitting rules.
This applies only to ISDN BRI/PRI trunks.
Enumerationr/w
Enumerated Values:
0enbloc
1overlap
 .1.3.6.1.4.1.6889.2.6.4.13.1.7
avSurvIncomingRoutingRowStatus
Create/Delete a row entry in this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.13.1.8

avSurvNfasTable

table
.1.3.6.1.4.1.6889.2.6.4.14 · 1 row entry · 5 columns
Open in standard view 
Signaling Group Nfas , associated with an ISDN trunk group, Table
avSurvNfasEntry entry .1.3.6.1.4.1.6889.2.6.4.14.1
Each entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status
Indexes
avSurvNfasSigGroupRefNumber avSurvNfasIndex
Column Syntax OID
avSurvNfasSigGroupRefNumber
Entry pointing to the associated signaling group number in the signaling group table
Integer32r/w
Constraints:
range: 1-650
 .1.3.6.1.4.1.6889.2.6.4.14.1.1
avSurvNfasIndex
Nfas Table Index
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.6889.2.6.4.14.1.2
avSurvNfasInterface
The identity for the NFAS DS1 facility group: 3 digit gateway
number + 2 character slot number
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.6889.2.6.4.14.1.3
avSurvNfasInterfaceId
For an NFAS circuit, this specifies the identification number of
the DS1 circuit that is associated with this NFAS group. Note
that this ID number must be coordinated with the PSTN provider
so that the signaling protoc…
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.6889.2.6.4.14.1.4
avSurvNfasRowStatus
Create/Delete a row entry in this table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.6.4.14.1.5