avSurvTrunkGroupDial
AVAYA-SURV-MIB ·
.1.3.6.1.4.1.6889.2.6.4.3.1.4
Object
column
r/w
Enumeration
Trunk Group Outward Dial. Note MF not supported in SLS
Context
- MIB
- AVAYA-SURV-MIB
- OID
.1.3.6.1.4.1.6889.2.6.4.3.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- avSurvTrunkGroupEntry
- Table
- avSurvTrunkGroupTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | rotary |
2 | dtmf |
3 | mf |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| avSurvTrunkGroupNum Trunk Group Number | column | Integer32 | .1.3.6.1.4.1.6889.2.6.4.3.1.1 |
| avSurvTrunkGroupCodesetDisplay Which Q.931 codesets are allowed to send Display IE's to the user phones
This applies only to ISDN BRI/PRI trunks. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.10 |
| avSurvTrunkGroupCodesetNational Which codesets are allowed to send National supported IE's.
This applies only to ISDN BRI/PRI trunks. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.11 |
| avSurvTrunkGroupChannelPreference Used for encoding Channel-ID IE.
This applies only to ISDN BRI/PRI trunks. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.12 |
| avSurvTrunkGroupDigitHandling Defines overlap receiving and transmitting rules.
This applies only to ISDN BRI/PRI trunks. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.13 |
| avSurvTrunkGroupJapanDisconnect Send a Q.931 CONNECT msg right before sending DISCONNECT msg.
This applies only to ISDN BRI/PRI trunks in Japan. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.14 |
| avSurvTrunkGroupSendName Specifies whether Calling, Connected, Called party's name
is to be shared with network.
This applies only to ISDN BRI/PRI trunks.
Default is no. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.15 |
| avSurvTrunkGroupSendCallingNumber Specifies how to fill the Calling-Party and Called-Party IE fields.
This applies only to ISDN BRI/PRI trunks.
Default is no. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.16 |
| avSurvTrunkGroupNumberingFormat Specifies how to fill the Calling-Party and Called-Party IE fields.
This applies only to ISDN BRI/PRI trunks.
SLS only supports unknown(1) and public(2). Default is unknown. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.17 |
| avSurvTrunkGroupIncomingDestination Analog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group calls | column | OctetString | .1.3.6.1.4.1.6889.2.6.4.3.1.18 |
| avSurvTrunkGroupIncomingDialTone Analog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizure | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.19 |
| avSurvTrunkGroupType Trunk Group Type | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.2 |
| avSurvTrunkGroupR2MFCSignaling Determines MFC signaling set to be used.
This only applies to R2MFC trunks.
This feature not supported in SLS for R4.0 | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.20 |
| avSurvTrunkGroupTrunkHunt Determines the method in which the SLS call engine selects from
the trunk group pool of available trunks.
This only applies to digital trunks. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.21 |
| avSurvTrunkGroupDs1Supervision Applies to non-ISDN DS1 trunks: Specifies the type
of incomming/outgoing supervision that is used on these trunks. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.22 |
| avSurvTrunkGroupCbc Applies to ISDN DS1 trunks: Specifies whether the trunk is to
operate in call-by-call basis. If yes, then send the NSF IE. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.23 |
| avSurvTrunkGroupCbcServiceFeature Applies to ISDN DS1 trunks: Specifies the type of service
or feature specifed in the NSF IE for outbound trunk calls.
Only valid if CBC=yes. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.24 |
| avSurvTrunkGroupCbcParameter Applies to ISDN DS1 trunks: Specifies the class of
service being offered as part of Selective Class of
Call Selection (scocs)service mode.
Only valid if service mode is scocs. | column | Integer32 | .1.3.6.1.4.1.6889.2.6.4.3.1.25 |
| avSurvTrunkGroupBusyDisconnect Applies to Analog Loop Start Trunks: Specifies whether
the presence of busy tone signal will cause the
trunk call to be disconnected. Default = no. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.26 |
| avSurvTrunkGroupTAC Trunk Group Trunk Access Code (TAC) | column | OctetString | .1.3.6.1.4.1.6889.2.6.4.3.1.3 |
| avSurvTrunkGroupRowStatus Create/Delete a row entry | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6889.2.6.4.3.1.5 |
| avSurvTrunkGroupDidDigitTreatment Trunk Group DID digit treatment option.
This applies for analog DID trunks and non-ISDN digital tie trunks.
Note: blank means take no action. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.6 |
| avSurvTrunkGroupDidDigitsInsert Digit string to be inserted for DID treatment
This applies for analog DID trunks and non-ISDN digital tie trunks. | column | OctetString | .1.3.6.1.4.1.6889.2.6.4.3.1.7 |
| avSurvTrunkGroupDidSupervision Type of incoming supervision used on DID trunk.
This applies only for analog DID trunks. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.3.1.8 |
| avSurvTrunkGroupName Customer's name for trunk group | column | OctetString | .1.3.6.1.4.1.6889.2.6.4.3.1.9 |