avSurvDs1Connect
AVAYA-SURV-MIB ·
.1.3.6.1.4.1.6889.2.6.4.10.1.6
Object
column
r/w
Enumeration
Specifies what type of equipment is at the far end of the DS1 link
Context
- MIB
- AVAYA-SURV-MIB
- OID
.1.3.6.1.4.1.6889.2.6.4.10.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- avSurvDs1Entry
- Table
- avSurvDs1Table
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | host |
2 | network |
3 | pbx |
4 | lineSide |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| avSurvDs1Index DS1 Table Index | column | Integer32 | .1.3.6.1.4.1.6889.2.6.4.10.1.1 |
| avSurvDs1ProtocolVersion Used in countries whose public networks allow multiple Layer-3
signaling protocols for ISDN PRI service. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.10 |
| avSurvDs1BearerCapability Sets the information transfer capability in the Bearer Capability
IE of SETUP message for ISDN PRI service. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.11 |
| avSurvDs1InterfaceCompanding Specifies the companding method used by the far-end switch | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.12 |
| avSurvDs1LongTimer Specifies whether the duration of the T302 and T303 Q.931 timers
should be extended to a longer duration. Used for Russia country
code | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.13 |
| avSurvDs1RowStatus Create/Delete a row entry in this table | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6889.2.6.4.10.1.14 |
| avSurvDs1SlotNumberId This is the string identifier that CM uses to identify the slot
of the media gateway. The first character is defined as a v
followed by one decimal number, e.g. v1 | column | OctetString | .1.3.6.1.4.1.6889.2.6.4.10.1.15 |
| avSurvDs1Name Name of the service provider and/or site destination of DS1 facility | column | OctetString | .1.3.6.1.4.1.6889.2.6.4.10.1.2 |
| avSurvDs1BitRate Maximum transmission rate for DS1 interface | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.3 |
| avSurvDs1SignalingMode Selects the signaling method deployed on the given DS1 facility | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.4 |
| avSurvDs1ChannelNumbering Channel numbering scheme;
E1 interface for ETSI and QSIG requires sequential encoding from
1 to 30 | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.5 |
| avSurvDs1Interface Determines glare handling | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.7 |
| avSurvDs1Side QSIG glare handling when interface field is peerSlave | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.8 |
| avSurvDs1CountryProtocol Specifies the Layer 3 signaling protocol used by the
country-specific service provider.
This applies to ISDN trunk. | column | Enumeration | .1.3.6.1.4.1.6889.2.6.4.10.1.9 |