ATMF-CES Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
36

atmfCESConfTable

table
.1.3.6.1.4.1.353.5.2.2.1.1 · 1 row entry · 16 columns
Open in standard view 
The CES configuration table used to manage interworking
between CBR interfaces or channels and ATM Virtual Channel
Links (VCLs).  The reverse mapping is shown in the
atmfCESMappingTable.
atmfCESConfEntry entry .1.3.6.1.4.1.353.5.2.2.1.1.1
An entry in the CES configuration table. There is one
entry in the table per CES entity, mapping one CBR
interface, channel, or bundle to an ATM VCL.

Creation of a row in this table with a non-zero
atmfCES…
Indexes
atmfCESCbrIndex
Column Syntax OID
atmfCESCbrIndex
The value of this object is equal to MIB II's ifIndex value
of the CBR interface, channel, or bundle that is being
cross-connected to an ATM VCL.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.2.2.1.1.1.1
atmfCESAtmIndex
The value of this object is equal to MIB II's
ifIndex value of the ATM Port interface mapped
through this CES IWF to a CBR interface. This value
is overwritten whenever an active or passive SVC is
established.
…
CESConnectionPortr/w
Textual Convention: CESConnectionPort Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.353.5.2.2.1.1.1.2
atmfCESAtmVpi
The value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. This value is overwritten whenever an
active or passive SVC is established.

The value is n…
VpiIntegerr/w
Textual Convention: VpiInteger Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.353.5.2.2.1.1.1.3
atmfCESAtmVci
The value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. This value is overwritten whenever an
active or passive SVC is established.

The distinguis…
VciIntegerr/w
Textual Convention: VciInteger Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.353.5.2.2.1.1.1.4
atmfCESCbrService
Define if DSx/Ex service isas structured or unstructurednot. A
structured(2) interface is some nx64kbKbps. An unstructured
(1) interface is 1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps,
or 34.368 Mbps. unstructured(1) p…
Enumerationr/w
Enumerated Values:
1unstructured
2structured
 .1.3.6.1.4.1.353.5.2.2.1.1.1.5
atmfCESCbrClockMode
Define if DSx/Ex service clocking mode. This maps into
transmit clock source of CBR interface.

For structured modes this value, if present, must be set to
synchronous(1).
Enumerationr/w
Enumerated Values:
1synchronous
2srts
3adaptive
 .1.3.6.1.4.1.353.5.2.2.1.1.1.6
atmfCESCas
This parameter selects which AAL1 Format should be used:
Basic does not carry CAS bits, and uses a single 125 usec frame.
e1Cas, ds1SfCas, dS1EsfCas and j2Cas carry CAS bits in a
multiframe structure for E1, DS1 SF, DS1…
Enumerationr/w
Enumerated Values:
1basic
2e1Cas
3ds1SfCas
4ds1EsfCas
5j2Cas
 .1.3.6.1.4.1.353.5.2.2.1.1.1.7
atmfCESPartialFill
If partial cell fill is used, the number of user octets per
cell must be set with this parameter. Setting this parameter
to zero disables partial cell fill, and causes all cells to
be completely filled before they are …
Integer32r/w
Constraints:
range: 0-47
 .1.3.6.1.4.1.353.5.2.2.1.1.1.8
atmfCESBufMaxSize
Define maximum size in 10 microsecond increments of the
reassembly buffer. Some implementations may want allow the
maximum buffer size to be programmed to a size less than the
physical limit to reduce the maximum delay …
10 usecInteger32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.353.5.2.2.1.1.1.9
atmfCESCdvRxT
The maximum cell arrival jitter in 10 usec increments that
the reassembly process will tolerate in the cell stream
without producing errors on the CBR service interface.
10 usecInteger32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.353.5.2.2.1.1.1.10
atmfCESCellLossIntegrationPeriod
The time in milliseconds for the cell loss integration period.
If a cells are continuously lost for this period of time,
atmfCESCellLossStatus is set to loss (2). The
default definition is 2500.
msecInteger32r/w
Constraints:
range: 1000-65535
 .1.3.6.1.4.1.353.5.2.2.1.1.1.11
atmfCESConnType
The type of ATM connectivity between associated CES IWF's.
Valid values are:
other - none of the types specified below
pvc - supporting connectivity is a permanent
virtual connection
…
Enumerationr/w
Enumerated Values:
1other
2pvc
3activeSvc
4passiveSvc
 .1.3.6.1.4.1.353.5.2.2.1.1.1.12
atmfCESLocalAddr
The ATM address of the local CES IWF process. This address
may be used by the automatic SVC establishment procedures to
identify the intended recipient CES IWF of an incoming automatic
SVC call request. Optionally, the …
AtmAddrr/w
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.2.2.1.1.1.13
atmfCESAdminStatus
The desired administrative status of the CES interworking
function. The up and down states indicate that the traffic
flow is enabled or disabled respectively across the CES
interworking function.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.353.5.2.2.1.1.1.14
atmfCESOperStatus
The operational status of the CES interworking function.
The up and down states indicate that the traffic flow is
enabled or disabled respectively across the CES interworking
function. The unknown state indicates that …
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.353.5.2.2.1.1.1.15
atmfCESConfRowStatus
This object is used to create new rows in this table, modify
existing rows, and to delete existing rows.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.2.2.1.1.1.16

atmfCESMappingTable

table
.1.3.6.1.4.1.353.5.2.2.1.2 · 1 row entry · 1 columns
Open in standard view 
The CES mapping table used to show the mapping from ATM
VCLs to CBR interfaces or channels.  The mapping and
interworking functions are configured in the
atmfCESConfTable.
atmfCESMappingEntry entry .1.3.6.1.4.1.353.5.2.2.1.2.1
An entry in the CES mapping table. There is one entry
in the table corresponding to each active row in the
atmfCESConfTable for which there is a non-zero
atmfCESAtmIndex.
Indexes
atmfCESAtmIndex atmfCESAtmVpi atmfCESAtmVci
Column Syntax OID
atmfCESMappingCbrIndex
The value of this object is equal to MIB II's ifIndex value
of the CBR interface, channel, or bundle that is being
cross-connected to an ATM VCL. Examples of the ifType
value for the CBR entity are ds1(18), ds3(30), ds…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.2.2.1.2.1.1

atmfCESStatsTable

table
.1.3.6.1.4.1.353.5.2.2.1.3 · 1 row entry · 10 columns
Open in standard view 
The CES AAL1 statistical data table.
atmfCESStatsEntry entry .1.3.6.1.4.1.353.5.2.2.1.3.1
An entry in the CES AAL1 Stats table. There is one
entry in this table corresponding to each entry in the
atmfCESConfTable.
Indexes
No indexes recorded
Column Syntax OID
atmfCESReassCells
This count gives the number of cells played out to the
CES Service Interface. It excludes cells that were
discarded for any reason, including cells that were not used
due to being declared misinserted, or discarded whil…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.1
atmfCESHdrErrors
The count of the number of AAL1 header errors detected,
including those corrected. Header errors include correctable
and uncorrectable CRC, plus bad parity.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.2
atmfCESPointerReframes
This records the count of the number of events in which the
AAL1 reassembler found that an SDT pointer is not where it is
expected, and the pointer must be reacquired. This count is
only meaningful for structured CES mo…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.3
atmfCESPointerParityErrors
This records the count of the number of events in which the
AAL1 reassembler detects a parity check failure at the point
where a structured data pointer is expected. This count is only
meaningful for structured CES mode…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.4
atmfCESAal1SeqErrors
Number of times that the sequence number of an incoming AAL1
Type 1 SAR-PDU causes a transition from the 'sync' state to
the 'out of sequence' state, as defined by ITU-T I.363.1.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.5
atmfCESLostCells
Number of lost cells, as detected by the AAL1 sequence number
processing, for example. This records the count of the number
of cells detected as lost in the network prior to the
destination CES IWF AAL1 layer processing.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.6
atmfCESMisinsertedCells
Number of AAL1 sequence violations which the AAL Convergence
sublayer interprets as a misinserted cell, as defined by
ITU-T I.363.1.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.7
atmfCESBufUnderflows
Number of buffer underflows. This records the count of the
number of times the CES reassembly buffer underflows. In the
case of a continuous underflow caused by a loss of ATM cell
flow, a single buffer underflow should …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.8
atmfCESBufOverflows
Number of buffer overflows. This records the count of the
number of times the CES reassembly buffer overflows. If the CES
IWF is implemented with multiple buffers (such as a cell level
buffer and a bit level buffer, the…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.3.1.9
atmfCESCellLossStatus
When cells are continuously lost for the number of milliseconds
specified by atmfCESCellLossIntegrationPeriod, the value is set
to loss (2). When cells are no longer lost, the value is set
to noLoss (1).
Enumeration
Enumerated Values:
1noLoss
2loss
 .1.3.6.1.4.1.353.5.2.2.1.3.1.10

atmfCESActiveSvcTable

table
.1.3.6.1.4.1.353.5.2.2.1.4 · 1 row entry · 9 columns
Open in standard view 
The table used to manage active SVCs established across ATM
networks between CES entities.
atmfCESActiveSvcEntry entry .1.3.6.1.4.1.353.5.2.2.1.4.1
An entry in the CES active SVC table. There is one
entry in the table corresponding to each active row in
the atmfCESConfTable for which the atmfCESConnType takes
the value 'activeSvc'.
Indexes
atmfCESCbrIndex
Column Syntax OID
atmfCESRemoteAddr
The ATM address supporting the corresponding far end
CES IWF process. If no address is supplied, no attempts
to establish the active SVC are initiated.
AtmAddrr/w
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.2.2.1.4.1.1
atmfCESFirstRetryInterval
The time to wait before attempting to establish the SVC
after the first failed call attempt. The time to wait
between subsequent call attempts may differ to implement
a backoff scheme. Zero represents an infinite inte…
secondsInteger32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.353.5.2.2.1.4.1.2
atmfCESRetryTimer
Indicates the current value of the retry timer for
this connection. When the value reaches zero an attempt
will be made to establish the active SVC. When the timer
is not running, the value zero shall be returned.
secondsInteger32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.353.5.2.2.1.4.1.3
atmfCESRetryLimit
Sets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
management action will be required (e.g. set…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.2.2.1.4.1.4
atmfCESRetryFailures
Indicates how many attempts to establish the connection
have failed. This count is reset whenever a connection
is successfully established or the active SVC is restarted.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.2.2.1.4.1.5
atmfCESActiveSvcRestart
When the value is set to 'restart' the active SVC
is released if necessary and a new setup procedure
is begun. As a result of this action, the
atmfCESActiveSvcOperStatus object transitions to
'establishmentInProgress' …
Enumerationr/w
Enumerated Values:
1restart
2noop
 .1.3.6.1.4.1.353.5.2.2.1.4.1.6
atmfCESActiveSvcOperStatus
Describes the status of the active SVC. Valid values are:
other - none of the types specified below
establishmentInProgress - connection is not operational,
but call attempts are …
Enumeration
Enumerated Values:
1other
2establishmentInProgress
3connected
4retriesExhausted
5noAddressSupplied
6lowerLayerDown
 .1.3.6.1.4.1.353.5.2.2.1.4.1.7
atmfCESLastReleaseCause
Value of the Cause field of the Cause information element
in the last RELEASE signalling message received for this
active SVC. Indicates the reason for the release.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.353.5.2.2.1.4.1.8
atmfCESLastReleaseDiagnostics
Value of the first 8 bytes of diagnostic information
from the Cause field of the Cause information element
in the last RELEASE signalling message received for this
active SVC.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.353.5.2.2.1.4.1.9