atmfCESConfRowStatus
ATMF-CES ·
.1.3.6.1.4.1.353.5.2.2.1.1.1.16
Object
This object is used to create new rows in this table, modify existing rows, and to delete existing rows.
Context
- MIB
- ATMF-CES
- OID
.1.3.6.1.4.1.353.5.2.2.1.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmfCESConfEntry
- Table
- atmfCESConfTable
- Siblings
- 15
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmfCESCbrIndex The value of this object is equal to MIB II's ifIndex value
of the CBR interface, channel, or bundle that is being
cross-connected to an ATM VCL. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.353.5.2.2.1.1.1.1 |
| atmfCESCdvRxT The maximum cell arrival jitter in 10 usec increments that
the reassembly process will tolerate in the cell stream
without producing errors on the CBR service interface. | column | 10 usec Integer32 | .1.3.6.1.4.1.353.5.2.2.1.1.1.10 |
| atmfCESCellLossIntegrationPeriod The time in milliseconds for the cell loss integration period.
If a cells are continuously lost for this period of time,
atmfCESCellLossStatus is set to loss (2). The
default def… | column | msec Integer32 | .1.3.6.1.4.1.353.5.2.2.1.1.1.11 |
| atmfCESConnType The type of ATM connectivity between associated CES IWF's.
Valid values are:
other - none of the types specified below
pvc - supporting connectivity is a permane… | column | Enumeration | .1.3.6.1.4.1.353.5.2.2.1.1.1.12 |
| atmfCESLocalAddr The ATM address of the local CES IWF process. This address
may be used by the automatic SVC establishment procedures to
identify the intended recipient CES IWF of an incoming auto… | column | AtmAddr | .1.3.6.1.4.1.353.5.2.2.1.1.1.13 |
| atmfCESAdminStatus The desired administrative status of the CES interworking
function. The up and down states indicate that the traffic
flow is enabled or disabled respectively across the CES
inter… | column | Enumeration | .1.3.6.1.4.1.353.5.2.2.1.1.1.14 |
| atmfCESOperStatus The operational status of the CES interworking function.
The up and down states indicate that the traffic flow is
enabled or disabled respectively across the CES interworking
func… | column | Enumeration | .1.3.6.1.4.1.353.5.2.2.1.1.1.15 |
| atmfCESAtmIndex The value of this object is equal to MIB II's
ifIndex value of the ATM Port interface mapped
through this CES IWF to a CBR interface. This value
is overwritten whenever an activ… | column | CESConnectionPort | .1.3.6.1.4.1.353.5.2.2.1.1.1.2 |
| atmfCESAtmVpi The value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. This value is overwritten whenever an
active or passive SVC is es… | column | VpiInteger | .1.3.6.1.4.1.353.5.2.2.1.1.1.3 |
| atmfCESAtmVci The value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. This value is overwritten whenever an
active or passive SVC is es… | column | VciInteger | .1.3.6.1.4.1.353.5.2.2.1.1.1.4 |
| atmfCESCbrService Define if DSx/Ex service isas structured or unstructurednot. A
structured(2) interface is some nx64kbKbps. An unstructured
(1) interface is 1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736… | column | Enumeration | .1.3.6.1.4.1.353.5.2.2.1.1.1.5 |
| atmfCESCbrClockMode Define if DSx/Ex service clocking mode. This maps into
transmit clock source of CBR interface.
For structured modes this value, if present, must be set to
synchrono… | column | Enumeration | .1.3.6.1.4.1.353.5.2.2.1.1.1.6 |
| atmfCESCas This parameter selects which AAL1 Format should be used:
Basic does not carry CAS bits, and uses a single 125 usec frame.
e1Cas, ds1SfCas, dS1EsfCas and j2Cas carry CAS bits in a
… | column | Enumeration | .1.3.6.1.4.1.353.5.2.2.1.1.1.7 |
| atmfCESPartialFill If partial cell fill is used, the number of user octets per
cell must be set with this parameter. Setting this parameter
to zero disables partial cell fill, and causes all cells … | column | Integer32 | .1.3.6.1.4.1.353.5.2.2.1.1.1.8 |
| atmfCESBufMaxSize Define maximum size in 10 microsecond increments of the
reassembly buffer. Some implementations may want allow the
maximum buffer size to be programmed to a size less than the
phy… | column | 10 usec Integer32 | .1.3.6.1.4.1.353.5.2.2.1.1.1.9 |