AT-FIBER-MONITORING-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
15
atFiberMonConfigTable
table.1.3.6.1.4.1.207.8.4.4.3.27.2
·
1 row entry
·
6 columns
It contains the objects used to configure the operation of fiber monitoring.
Entry for the table. It contains the configurables of fiber monitering for an interface.
Indexes
atFiberMonIfname
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
atFiberMonIfname
The name of the interface where the pluggable is in.
|
OctetStringr/w Constraints: range: 1-16 |
.1.3.6.1.4.1.207.8.4.4.3.27.2.1.1 |
||||||||
|
atFiberMonEnable
Enable or disable fiber monitoring.
|
Enumerationr/w Enumerated Values:
Constraints: range: 0-65535 |
.1.3.6.1.4.1.207.8.4.4.3.27.2.1.2 |
||||||||
|
atFiberMonInterval
Fiber monitoring polling interval in seconds.
|
Integer32r/w Constraints: range: 0-65535range: 2-60 |
.1.3.6.1.4.1.207.8.4.4.3.27.2.1.3 |
||||||||
|
atFiberMonSensitivity
The sensitivity for fiber monitoring.
Acceptable mode strings and value ranges are as below: low - 2dB medium - 1dB high - 0.5dB h… |
OctetStringr/w | .1.3.6.1.4.1.207.8.4.4.3.27.2.1.4 |
||||||||
|
atFiberMonBaseline
The baseline value for firber mornitoring.
Acceptable mode string and value ranges are as below: average <12-150> - number of readings used to calculate moving average. fixed <1-65535> - f… |
OctetStringr/w | .1.3.6.1.4.1.207.8.4.4.3.27.2.1.5 |
||||||||
|
atFiberMonAlarmAction
Actions to take when an alarm occurs.
Acceptable values are: 1. Log a message only. 2. Send snmp trap and log. 3. Shut down the interface and log. 4. Send trap, shutdown and log. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.207.8.4.4.3.27.2.1.6 |
atFiberMonStateTable
table.1.3.6.1.4.1.207.8.4.4.3.27.3
·
1 row entry
·
9 columns
This table contains the information of fiber monitoring state for SFPs.
Entry for fiber monitoring state table. It contains state values for a fiber channel.
Indexes
atFiberMonIfindex atFiberMonChannel
| Column | Syntax | OID |
|---|---|---|
|
atFiberMonIfindex
The index of the interface where the pluggable is in.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.1 |
|
atFiberMonChannel
The channel number of the pluggable.
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.2 |
|
atFiberMonlIfDescription
Interface description. Normally it would be the name of the interface.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.3 |
|
atFiberMonActualBaseline
The calculated baseline value for the link, in units of 0.0001mW.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.4 |
|
atFiberMonThreshold
Threshold value for alarm to occur, in units of 0.0001mW.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.5 |
|
atFiberMonReadingHistory
The reading history. It is a string containing last 12 readings.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.6 |
|
atFiberMonMinReading
The minimum reading of rx power, in units of 0.0001mW.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.7 |
|
atFiberMonMaxReading
The maximum reading of rx power, in units of 0.0001mW.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.8 |
|
atFiberMonLastReading
The most recent reading of rx power, in units of 0.0001mW. -1 is returned if no readings have been taken yet.
|
Integer32 Constraints: range: -1-65535 |
.1.3.6.1.4.1.207.8.4.4.3.27.3.1.9 |