ASANTE-SWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
93

ipagentTrapRcvrTable

table mandatory
.1.3.6.1.4.1.298.1.1.5.2 · 1 row entry · 3 columns
Open in standard view 
Table listing the Network Management Stations
that are to receive traps generated by this
agent.
ipagentTrapRcvrEntry entry .1.3.6.1.4.1.298.1.1.5.2.1
Destination IP address and community string for a
particular trap receiver. Entries can be added or
deleted. To add an entry, all objects which have
read-write access defined in the same table should
be set in one set …
Indexes
ipagentTrapRcvrIpAddr
Column Syntax OID
ipagentTrapRcvrIpAddr mandatory
IP address of the management station to receive
traps.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.298.1.1.5.2.1.1
ipagentTrapRcvrStatus mandatory
Validation status of this entry. If the
value of this object is set to invalid(3),
then that particular entry is deemed invalid,
meaning that the address for that entry is no
longer valid because the entry has been rem…
Enumerationr/w
Enumerated Values:
1other
2valid
3invalid
 .1.3.6.1.4.1.298.1.1.5.2.1.2
ipagentTrapRcvrComm mandatory
Community string for traps sent to this trap
receiver.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.298.1.1.5.2.1.3

eSWBankImageInfoTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.1.1.14 · 1 row entry · 4 columns
Open in standard view 
A table of information about the switch's
image banks.
eSWBankImageInfoEntry entry .1.3.6.1.4.1.298.1.5.1.1.1.14.1
A row in the image bank table containing
information about a specific bank.
Indexes
eSWBankIndex
Column Syntax OID
eSWBankIndex mandatory
The index of bank image information table. It
is the number of the image bank. Currently the
IntraSwitch 62xx family supports 2 image banks.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.298.1.5.1.1.1.14.1.1
eSWMajorVer mandatory
The major version of the image file loaded in
the bank. If this object and eSWMinorVer both have
zero values, the bank has no image code loaded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.1.1.14.1.2
eSWMinorVer mandatory
The minor version number of the bank image
software. If this object and eSWMajorVer both
have zero values, the bank has no image code
loaded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.1.1.14.1.3
eSWDateTime mandatory
The date and time of the image software loaded
in this bank.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.298.1.5.1.1.1.14.1.4

eSWGroupInfoTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.5 · 1 row entry · 11 columns
Open in standard view 
This is the table to describe basic information
for each group of ports in the switch.
eSWGroupInfoEntry entry .1.3.6.1.4.1.298.1.5.1.2.5.1
This is the entry to describe basic information
for a particular group of ports.
Indexes
eSWGrpIndex
Column Syntax OID
eSWGrpIndex mandatory
The group number, which is the index of the table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.5.1.1
eSWGrpID mandatory
The ID of this group module. This is the MAC address
of the first port in the group.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.298.1.5.1.2.5.1.2
eSWGrpState mandatory
A command to disable or enable a physical module
in the switch device stack.
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.298.1.5.1.2.5.1.3
eSWGrpNumofPorts mandatory
The number of ports including expansion ports
in the group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.5.1.4
eSWGrpType mandatory
The type of group module described by this entry.
Enumeration
Enumerated Values:
1other
2empty
3intraSwitch
4intraStack-Base
5intraStack-FX8
6intraStack-TX16
7enterprise6216M-TX16
8enterprise6224M-TX24
9intraCore8000
10intraCore-RJ45
11intraCore-RJ21
12intraCore-GIGA
 .1.3.6.1.4.1.298.1.5.1.2.5.1.5
eSWGrpDescrption mandatory
A description of the group module described by
this entry.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.298.1.5.1.2.5.1.6
eSWGrpLED mandatory
This octet string represents the current LED
setting for this slot/group. Each octet in the
string represents one led. LEDs on the front
panel of the slot module are ordered from the top
to the bottom and order in lef…
OctetString
Constraints:
range: 128-128
 .1.3.6.1.4.1.298.1.5.1.2.5.1.7
eSWGrpFanStatus mandatory
The value of this object describes the fan status.
If there is more than one fan within the device,
the indication shows any failure among the fans.
Enumeration
Enumerated Values:
1other
2no-fan
3normal
4fail
5fan-1-bad
6fan-2-bad
7fan-1-2-bad
 .1.3.6.1.4.1.298.1.5.1.2.5.1.8
eSWGrpNumofExpPorts mandatory
The number of expansion ports in this group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.5.1.9
eSWGrpLastChange mandatory
The value of sysUpTime at the last change
in status of the group since it has been in
operation. If no change has occurred since this
group became operational, its value is zero. In
IntraStack, this object is useful on…
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.298.1.5.1.2.5.1.10
eSWGrpReset mandatory
This object represents the current group
reset state.
Enumeration
Enumerated Values:
1other
2noReset
3reset
 .1.3.6.1.4.1.298.1.5.1.2.5.1.11

eSWPortInfoTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.6 · 1 row entry · 7 columns
Open in standard view 
A table containing basic information for each
port in this switch.
eSWPortInfoEntry entry .1.3.6.1.4.1.298.1.5.1.2.6.1
A table entry containing information about a
specific port.
Indexes
eSWPortGrpIndex eSWPortIndex
Column Syntax OID
eSWPortGrpIndex mandatory
The number of the group containing the port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.6.1.1
eSWPortIndex mandatory
The number of the port which this entry
describes.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.6.1.2
eSWPortType mandatory
The type port in this switch. MII-Empty(1)
means there is no expansion module plugged in.
Enumeration
Enumerated Values:
1other
2mii-Empty
3mii-FL
4mii-RJ45
5mii-FX
6rj45
7foil
 .1.3.6.1.4.1.298.1.5.1.2.6.1.3
eSWPortAutoNegAbility mandatory
Indicates whether the port has Auto Negotiation
signaling ability.
Enumeration
Enumerated Values:
1other
2with
3without
 .1.3.6.1.4.1.298.1.5.1.2.6.1.4
eSWPortLink mandatory
The link status of this port.
Enumeration
Enumerated Values:
1other
2up
3down
 .1.3.6.1.4.1.298.1.5.1.2.6.1.5
eSWPortSpeed mandatory
The working speed of this port. If the port's
link is not up, this object should show the
configured speed.
Enumeration
Enumerated Values:
1other
2m10-Mbps
3m100-Mbps
4g1-Gbps
 .1.3.6.1.4.1.298.1.5.1.2.6.1.6
eSWPortDuplex mandatory
The duplex state of this port. When the port
link is not up, this object should show the
configured duplex information.
Enumeration
Enumerated Values:
1other
2half-Duplex
3full-Duplex
 .1.3.6.1.4.1.298.1.5.1.2.6.1.7

eSWGpPtInfoTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.7 · 1 row entry · 6 columns
Open in standard view 
A table describing the port information for each
group in BYTE mapping method. The main purpose
of creating this table is to reduce the SNMP
parsing time and the load of network traffic.
eSWGpPtInfoEntry entry .1.3.6.1.4.1.298.1.5.1.2.7.1
This is an entry of eSWGroupPortInfoTable.
Indexes
eSWGpPtInfoIndex
Column Syntax OID
eSWGpPtInfoIndex mandatory
The group number .
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.7.1.1
eSWGpPtInfoType mandatory
This octet string is for the type of each port
in this group. Each octet represents one port;
therefore, octet 0 is port 1 and octet 9 is port
10. Each octet stores the data from eSWPortType.
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.2.7.1.2
eSWGpPtInfoAutoNegAbility mandatory
This octet string is for the auto negotiation
ability of each port in this group. Each octet
represents one port; therefore, octet 0 is port
1 and octet 9 is port 10. Each octet stores the
data from eSWPortAutoNegAbilit…
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.2.7.1.3
eSWGpPtInfoLink mandatory
This octet string is for the link status of
each port in this group. Each octet represents
one port; therefore, octet 0 is port 1 and octet
9 is port 10. Each octet stores the data from
eSWPortLink.
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.2.7.1.4
eSWGpPtInfoSpeed mandatory
This octet string is for the operating speed of
each port in this group. Each octet represents
one port; therefore, octet 0 is port 1 and octet
9 is port 10. Each octet stores the data from
eSWPortSpeed.
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.2.7.1.5
eSWGpPtInfoDuplex mandatory
This octet string is for the Duplex state of
each port in this group. Each octet represents
one port; therefore, octet 0 is port 1 and octet
9 is port 10. Each octet stores the data from
eSWPortDuplex.
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.2.7.1.6

eSWPtMacInfoTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.8 · 1 row entry · 2 columns
Open in standard view 
A table describing the MAC addresses learned
on each port.
eSWPtMacInfoEntry entry .1.3.6.1.4.1.298.1.5.1.2.8.1
Entry of eSWPtMacInfoTable.
Indexes
eSWPtMacPort eSWPtMacMACADDR
Column Syntax OID
eSWPtMacPort mandatory
The port number in the switch.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.8.1.1
eSWPtMacMACADDR mandatory
MAC address.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.298.1.5.1.2.8.1.2

eSWVlanTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.9.4 · 1 row entry · 5 columns
Open in standard view 
A table describing the information about every
VLAN associated with the switch.
eSWVlanEntry entry .1.3.6.1.4.1.298.1.5.1.2.9.4.1
A list of information for each VLAN within the
switch.
Indexes
eSWVLANIndex
Column Syntax OID
eSWVLANIndex mandatory
Index in VLAN Configuration Table within the
switch.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.9.4.1.1
eSWVlanName mandatory
This octet string is the name of the VLAN. The
length of the name can be up to 32 printable
characters.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.298.1.5.1.2.9.4.1.2
eSWVlanID mandatory
A 12 bit indentifier for this VLAN.

0 - The NULL VLAN ID. It is used when the
tagging header contains only user
priority information; no VLAN identifier
is present in the frame. Th…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.9.4.1.3
eSWVlanMemberSet mandatory
The set of ports to which traffic destined for
this VLAN may be transmitted. Each octet within
the value of this object specifies a set of eight
ports, with the first octet specifying ports 1
through 8, the second speci…
OctetString .1.3.6.1.4.1.298.1.5.1.2.9.4.1.4
eSWVlanMgmAccess mandatory
This object provides enabling and disabling of
switch management access. When this object for
a VLAN entry is set to Enable(1), the switch
management (Telnet, SNMP Agent, HTTP Server and
ICMP serverices can be accessed …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.298.1.5.1.2.9.4.1.5

eSWTrunkBundleTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.11 · 1 row entry · 4 columns
Open in standard view 
A table describing the Trunk Bundles information
of the switch.
eSWTrunkBundleEntry entry .1.3.6.1.4.1.298.1.5.1.2.11.1
This is an entry of eSWTrunkBundleTable.
Indexes
eSWTrunkBundleIndex
Column Syntax OID
eSWTrunkBundleIndex mandatory
The index of eSWTrunkBundleTable table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.11.1.1
eSWTrunkBundlePortA mandatory
The ID of the first port of the Trunk Bundles.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.11.1.2
eSWTrunkBundlePortB mandatory
The ID of the second port of the Trunk Bundles.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.11.1.3
eSWTrunkBundleState mandatory
When this function is enabled, ports specified
by port A and port B will form a Trunk Bundle
to provide a fat communications channel.
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.298.1.5.1.2.11.1.4

eSWSecConfigTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.13.4 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the
Security Configuration that is associated with
each port of the switch.
eSWSecConfigEntry entry .1.3.6.1.4.1.298.1.5.1.2.13.4.1
A list of information for each port within
the switch.
Indexes
eSWSecPortIndex
Column Syntax OID
eSWSecPortIndex mandatory
The number of the port which this entry
describes.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.13.4.1.1
eSWSecurityLevel mandatory
Security Level Configured for the port.
Enumerationr/w
Enumerated Values:
1newNodeDetection
2knownMACAddressForwarding
3restrictedKnownMACAddressForwarding
4knownMACAddressForwardingWithIntruderLock
5normalPort
6other
 .1.3.6.1.4.1.298.1.5.1.2.13.4.1.2

eSWSecIncSetConfigTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.13.7 · 1 row entry · 3 columns
Open in standard view 
A table describing the MAC addresses configured
by the management for a port.  This entries of
the MAC Address are static entries
(No aging will be performed on these MAC
Addresses).
eSWSecIncSetConfigEntry entry .1.3.6.1.4.1.298.1.5.1.2.13.7.1
Entry of eSWSecIncSetConfigTable.
Indexes
eSWIncSetPort eSWIncSetMACAddr
Column Syntax OID
eSWIncSetPort mandatory
The port number in the switch associated with
the Inclusive Set MAC Address.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.13.7.1.1
eSWIncSetMACAddr mandatory
MAC address which is part of the Inclusive Set.
This MAC Address when appears in the source
MAC Address field in the ethernet frame will be
forwarded by the Associated Port if the Port is
set for Security Level 2 , Leve…
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.298.1.5.1.2.13.7.1.2
eSWIncSetMACStatus mandatory
MAC address which is part of the Inclusive Set.
This MAC Address when appears in the source
MAC Address field in the ethernet frame will be
forwarded by the Associated Port if the Port is
set for Security Level 2 , Leve…
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.298.1.5.1.2.13.7.1.3

eSWSecIntMACAddrTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.13.8 · 1 row entry · 2 columns
Open in standard view 
A table containing Intruder MAC Addresses when
any port is set to Security Level 2 or Security
Level 4.  In case of  a Port set to Security Level
4 this table indicating the Intruder MAC Addresses
are locked ( that is any station with its MAC
Address in the table will not able to forward \
transmits using any of the switch Ports.
eSWSecIntMACAddrEntry entry .1.3.6.1.4.1.298.1.5.1.2.13.8.1
Entry of eSWSecIntMACAddrTable.
Indexes
eSWIntMACAddrPort eSWIntMACAddr
Column Syntax OID
eSWIntMACAddrPort mandatory
The port number in the switch associated with
the Inturder MAC Address.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.13.8.1.1
eSWIntMACAddr mandatory
Intruder MAC Address.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.298.1.5.1.2.13.8.1.2

eSWFiltMACVLANBasedConfigTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.14.2 · 1 row entry · 3 columns
Open in standard view 
A table describing the filtering MAC addresses
configured by the management for a VLAN. This
entries of the MAC Address are static entries.
No aging will be performed on these MAC
Addresses.
eSWFiltMACVLANBasedConfigEntry entry .1.3.6.1.4.1.298.1.5.1.2.14.2.1
Entryof eSWFiltMACVLANBasedConfigTable.
Indexes
eSWVLANIndex eSWFiltMACAddr
Column Syntax OID
eSWVIDIndex mandatory
Index in VLAN Configuration Table within the
switch for which the Filtering MAC Address
is associated.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.14.2.1.1
eSWFiltMACAddr mandatory
MAC Address which will be filtered in the
indexed VID, when appear in source MAC Address
field of the frame.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.298.1.5.1.2.14.2.1.2
eSWFiltMACSts mandatory
MAC address which is part of the VLAN Based
Filtering MAC Address Set. This MAC Address
when appears in the source MAC Address field
in the ethernet frame will be filtered in the
indexed VID.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.298.1.5.1.2.14.2.1.3

eSWFiltMACPortBasedConfigTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.14.3 · 1 row entry · 3 columns
Open in standard view 
A table describing the filtering MAC addresses
configured by the management for a port.  This
entries of the MAC Address are static entries
No aging will be performed on this MAC Addresses.
eSWFiltMACPortBasedConfigEntry entry .1.3.6.1.4.1.298.1.5.1.2.14.3.1
Entry of eSWFiltMACPortBasedConfigTable.
Indexes
eSWFiltPortIndex eSWFiltPMACAddr
Column Syntax OID
eSWFiltPortIndex mandatory
The Port number in the switch.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.14.3.1.1
eSWFiltPMACAddr mandatory
MAC Address which will be filtered in the
indexed Port, when appear in destination MAC
Address field of the frame.
MacAddressr/w
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.298.1.5.1.2.14.3.1.2
eSWFiltPMACStatus mandatory
This field indicates status associated with
the MAC Address.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.298.1.5.1.2.14.3.1.3

eSWFiltProtVLANBasedCFGTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.14.4 · 1 row entry · 2 columns
Open in standard view 
A table describing the filtering Protocol Type
configured by the management for a port.
eSWFiltProtVLANBasedCFGEntry entry .1.3.6.1.4.1.298.1.5.1.2.14.4.1
Entry of eSWFiltProtVLANBasedCFGTable.
Indexes
eSWVLANIndex
Column Syntax OID
eSWFiltProtocolVID mandatory
Index in VLAN Configuration Table within the
switch for which the Filtering Protocol Type
is associated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.14.4.1.1
eSWFiltVLANProtocolType mandatory
This object represents the Protocol Type Filter
as applied to the Indexed VID. The Filtering
capabilities is indicated by each bit in this
2 bytes octet string.

1 - Filter OUT 0 - Do not Filter
Bit …
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.298.1.5.1.2.14.4.1.2

eSWFiltProtPortBasedCFGTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.2.14.5 · 1 row entry · 2 columns
Open in standard view 
A table describing the filtering Protocol Type
configured by the management for a port.
eSWFiltProtPortBasedCFGEntry entry .1.3.6.1.4.1.298.1.5.1.2.14.5.1
Entry of eSWFiltProtPortBasedCFGTable.
Indexes
eSWPortIndex
Column Syntax OID
eSWFiltProtPort mandatory
The Port number in the switch.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.2.14.5.1.1
eSWFiltProtcolType mandatory
This object represents the Protocol Type Filter
as applied to the Indexed Port. The Filtering
capabilities is indicated by each bit in this
2 bytes octet string.

1 - Filter OUT 0 - Do not Filter
Bit…
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.298.1.5.1.2.14.5.1.2

eSWPortCtrlTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.3.1 · 1 row entry · 13 columns
Open in standard view 
A table describing the port control information
for each port in this group.
eSWPortCtrlEntry entry .1.3.6.1.4.1.298.1.5.1.3.1.1
An entry describing control information for a
specific port.
Indexes
eSWGrpPtCtrlIndex eSWPortCtrlIndex
Column Syntax OID
eSWGrpPtCtrlIndex mandatory
The group containing the port for which this
entry has information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.3.1.1.1
eSWPortCtrlIndex mandatory
The port number for this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.3.1.1.2
eSWPortCtrlState mandatory
Identifies whether the port is administratively
enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.298.1.5.1.3.1.1.3
eSWPortCtrlBcastFilter mandatory
Broadcast packet filtering control. If this is
enabled, broadcast packets received on this port
will be filtered out. The default is Disable(3).
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.298.1.5.1.3.1.1.4
eSWPortCtrlStNFw mandatory
Enables or disables store-and-forward switching
for this port When set to Enable(2) the frame
will be forwarded after it has been completely
received and checksummed. When set to Disable(3),
the port will use fragment-f…
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.298.1.5.1.3.1.1.5
eSWPortCtrlSTP mandatory
If this function is enable(1) and
eSWPortCtrlState is also enable(1), that means
this port will join the Spanning Tree Algorithm
(STP) caculation. Asante 6016/6024 switches do
not support individual port STP participat…
Enumeration
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.298.1.5.1.3.1.1.6
eSWPortCtrlVlanID mandatory
The 12 bit port VLAN indentifier for this port
within the switch.

0 - The NULL VLAN ID. It is used when the
tagging header contains only user priority
information; no VLAN identifier is present in
the …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.3.1.1.7
eSWPortCtrlVlanTagging mandatory
Whether a frame should be tagged with VLAN
Tagging Header when transmitted through this
port within the switch.
Enable - Use Asante proprietary tagging mechanism
on this port wihtin the switch.
Enable8021Q - Use 802.1Q …
Enumerationr/w
Enumerated Values:
1enable
2enable8021Q
3disable
 .1.3.6.1.4.1.298.1.5.1.3.1.1.8
eSWPortCtrlVlanGroups mandatory
This object represents the port vlan map in
2 octets. The octets meaning is as follow: If 2
octets are considered together as 16 bit field,
then the least significant bit (bit0) represents
VLAN Group1, bit1 represents …
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.298.1.5.1.3.1.1.9
eSWPortCtrlTrunkBundleIndex mandatory
A value of 0 means that the port does not belong
to any trunk Bundle. A non-zero value is the index
of the Trunk Bundle to which this port belongs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.3.1.1.10
eSWPortCtrlGVRPEnable mandatory
This entry when set to enable, means GVRP
frames can be transmitted and received on this
port. If disabled, it means GVRP frames cannot
be transmitted on this port and the received
GVRP frames should be discarded. Defa…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.298.1.5.1.3.1.1.11
eSWPortCtrlSecurityLevel mandatory
Security Level associated with the port. When
set to Normal Port (5) , the Security Level
(if present) will be cleared.
Enumerationr/w
Enumerated Values:
1newNodeDetection
2knownMACAddressForwarding
3restrictedKnownMACAddressForwarding
4knownMACAddressForwardingWithIntruderLock
5normalPort
6other
 .1.3.6.1.4.1.298.1.5.1.3.1.1.12
eSWPortProtocolFilter mandatory
This object represents the Protocol Level
Security Filter as applied to the Port.
The Filtering capabilities is indicated by each
bit in this 2 bytes octet string.
1 - Filter OUT 0 - Do not Filter
Bit 0 : Filter OU…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.298.1.5.1.3.1.1.13

eSWGpPtCtrlTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.3.2 · 1 row entry · 7 columns
Open in standard view 
A table containing control information for
each port in a group. This table is indexed
by the group number.  It uses a BYTE mapping
method. Each byte represents control information
for a port in this group.  The main purpose of
creating this table is to reduce the SNMP engine
parsing time and the load of network traffic.
eSWGpPtCtrlEntry entry .1.3.6.1.4.1.298.1.5.1.3.2.1
An entry of table eSWGpPtCtrlTable.
Indexes
eSWGpPtCtrlIndex
Column Syntax OID
eSWGpPtCtrlIndex mandatory
The index of this table. It is the group number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.3.2.1.1
eSWGpPtCtrlState mandatory
This octet string displays the administrative
enable/disable state of each port in the group.
Each octet represents one port; therefore, octet
0 is port 1 and octet 9 is port 10. Each octet
stores the data from eSWPortC…
OctetStringr/w
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.3.2.1.2
eSWGpPtCtrlBcastFilter mandatory
This octet string displays the broadcast filter
state for each port in this group. Each octet
represents one port; therefore, octet 0 is port
1 and octet 9 is port 10. Each octet stores the
data from eSWPortCtrlBcastFil…
OctetStringr/w
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.3.2.1.3
eSWGpPtCtrlStNFw mandatory
This octet string displays the switching
technique (store-and-forward or fragment-free)
being used by each port in the group. Each octet
represents one port; therefore, octet 0 is port
1 and octet 9 is port 10. Each oc…
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.3.2.1.4
eSWGpPtCtrlSTP mandatory
This octet string displays the individual
port's participation in the Spanning Tree
Algorithm. Asante 62xx switches do not support
individual port STP participation, so all ports
should show the same value. Each octet …
OctetString
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.3.2.1.5
eSWGpPtCtrlSecurityLevel mandatory
This octet string is for the Security Level
information of each port in the group. Each octet
represents one port; therefore , the octet 0 is
port 1 and the octet 9 is port 10. Each octet
stores the data from eSWPortCt…
OctetStringr/w
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.3.2.1.6
eSWGpPtProtocolFilter mandatory
This octet string represents the Protocol Level
Security Filter as applied to each Port. Each
octet represents one port; therefore , the octet 0
is port 1 and the octet 9 is port 10. Each octet
stores the data from eS…
OctetStringr/w
Constraints:
range: 64-64
 .1.3.6.1.4.1.298.1.5.1.3.2.1.7

eSWAutoPortCtrlTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.3.3 · 1 row entry · 9 columns
Open in standard view 
A table containing information about each port's
auto- negotiation information.
eSWAutoPortCtrlEntry entry .1.3.6.1.4.1.298.1.5.1.3.3.1
A entry of eSWAutoPortControlTable. It uses
eSWAutoNegGrpIndex and eSWAutoNegPortIndex to
find the table entry.
Indexes
eSWAutoNegGrpIndex eSWAutoNegPortIndex
Column Syntax OID
eSWAutoNegGrpIndex mandatory
The value of this object identifies the group for
which this entry contains port auto-negotiation
information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.3.3.1.1
eSWAutoNegPortIndex mandatory
The value of this object identifies the port for
which this entry contains auto-negotiation
information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.3.3.1.2
eSWAutoNegAdminState mandatory
A port which has auto-negotiation signaling
ability will be enabled to do so when this object
is set to enabled(2). If the object is set to
disable(3) the port will operate as if it had
no auto-negotiation ability.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disable
 .1.3.6.1.4.1.298.1.5.1.3.3.1.3
eSWAutoNegRemoteAble mandatory
This object will be set to able(2) if the
port has detected that the link partner has
auto-negotiation ability.
Enumeration
Enumerated Values:
1other
2able
3not-able
 .1.3.6.1.4.1.298.1.5.1.3.3.1.4
eSWAutoNegAutoConfig mandatory
Indicates whether Auto Negotiation signaling is in
progress or has completed.
Enumeration
Enumerated Values:
1other
2configuring
3complete
4disable
5parallel-detect-fail
6remote-fault
 .1.3.6.1.4.1.298.1.5.1.3.3.1.5
eSWAutoNegLocalAbility mandatory
The connecting ability of local port. The
capability of the local port will be represented
by each bit in this 2 byte octet string. The
meaning of each bit is as follows:

0: is not capable 1: is capable…
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.298.1.5.1.3.3.1.6
eSWAutoNegAdvertisedAbility mandatory
This object represents the capabilities which will
be advertised in the Auto-Negotiation sequence. The
capability is indicated by each bit in this 2 byte
octet string.
0: is not capable 1: is capable
Bit 0 : default ca…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.298.1.5.1.3.3.1.7
eSWAutoNegReceivedAbility mandatory
Indicates the advertised capabilities of link
partner.
The capability will be represented by each bit
in this 2 byte octet string. The meaning of
each bit is as follows:

0: is not capable 1: is capable
…
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.298.1.5.1.3.3.1.8
eSWAutoNegRestartAutoConfig mandatory
Forces auto-negotiation to begin link
negotiation. Has no effect if auto-negotiation
signaling is diabled. Always returns
noRestart(3).
Enumerationr/w
Enumerated Values:
1other
2reStart
3noRestart
 .1.3.6.1.4.1.298.1.5.1.3.3.1.9

eSWMonIPTable

table mandatory
.1.3.6.1.4.1.298.1.5.1.4.1 · 1 row entry · 5 columns
Open in standard view 
This table describes the source IP address and
source MAC address mapping pair. It also provides
a function to detect IP address duplication. This
table can show that 2 MAC addresses map to the
same IP address. It is an important function
to help the system administrator to do network
administration.
eSWMonIPEntry entry .1.3.6.1.4.1.298.1.5.1.4.1.1
The entry of this table. The table is
indexed by the MAC address.
Indexes
eSWMonIP
Column Syntax OID
eSWMonIP mandatory
The IP address corresponding to the MAC address
in eSWMonMAC.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.298.1.5.1.4.1.1.1
eSWMonMAC mandatory
The source MAC address of the monitor entry.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.298.1.5.1.4.1.1.2
eSWMonVLANID mandatory
The VLAN number of this monitor address entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.4.1.1.3
eSWMonGrp mandatory
The IP address is learned from which group
number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.4.1.1.4
eSWMonPort mandatory
The port on which the IP address was learned
The agent should display value = (maximum number
of ports in the system + 1) when reflecting the
System's Management IP address.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.298.1.5.1.4.1.1.5