eSWGrpLED
ASANTE-SWITCH-MIB ·
.1.3.6.1.4.1.298.1.5.1.2.5.1.7
Object
column
mandatory
OctetString
This octet string represents the current LED
setting for this slot/group. Each octet in the
string represents one led. LEDs on the front
panel of the slot module are ordered from the top
to the bottom and order in left to right.
Each LED uses two bits for its action and state,
two bits for color, and has four reserved bits.
Bits 0-1:
00 -- LED on
01 -- LED off
10 -- LED blink.
Bits 6-7:
00 -- unknown color,
01 -- green,
10 -- yellow,
11 -- amber.
Bits 2-5 are reserved.
The 62XX LEDs on the front panel are ordered by port
LEDs followed by power, two MII (for 6216) and eight
utilization LEDs(for 6224).
The Octet String will be
Port1, Port2, port3 ... , PortN
0 - 3, 4 - 7, 8 -11 ... , (N - 1) * 4 - (( N * 4) - 1).
For the 6216, LED#65 is the power LED and 66 & 67
are MII LEDs.
For the 6224, LED#97 represents the power and
LEDs 98 - 105 represent utilization information.
Port octets meaning :
Octet 3 : Link Status.
Octet 2 : Data RX/TX.
Octet 1 : FDP.
Octet 0 : Speed.
Utilization octets meaning:
Octet 7 : 90+ %
Octet 6 : 75 - 90 %
Octet 5 : 50 - 75 %
Octet 4 : 25 - 50 %
Octet 3 : 10 - 25 %
Octet 2 : 5 - 10 %
Octet 1 : 3 - 5 %
Octet 0 : 1 - 3 %.
Context
- MIB
- ASANTE-SWITCH-MIB
- OID
.1.3.6.1.4.1.298.1.5.1.2.5.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- eSWGroupInfoEntry
- Table
- eSWGroupInfoTable
- Siblings
- 10
Syntax
OctetString
Values & Constraints
Object Constraints
range: 128-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eSWGrpIndex mandatory The group number, which is the index of the table. | column | Integer32 | .1.3.6.1.4.1.298.1.5.1.2.5.1.1 |
| eSWGrpLastChange mandatory The value of sysUpTime at the last change
in status of the group since it has been in
operation. If no change has occurred since this
group became operational, its value is zero.… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.298.1.5.1.2.5.1.10 |
| eSWGrpReset mandatory This object represents the current group
reset state. | column | Enumeration | .1.3.6.1.4.1.298.1.5.1.2.5.1.11 |
| eSWGrpID mandatory The ID of this group module. This is the MAC address
of the first port in the group. | column | MacAddress | .1.3.6.1.4.1.298.1.5.1.2.5.1.2 |
| eSWGrpState mandatory A command to disable or enable a physical module
in the switch device stack. | column | Enumeration | .1.3.6.1.4.1.298.1.5.1.2.5.1.3 |
| eSWGrpNumofPorts mandatory The number of ports including expansion ports
in the group. | column | Integer32 | .1.3.6.1.4.1.298.1.5.1.2.5.1.4 |
| eSWGrpType mandatory The type of group module described by this entry. | column | Enumeration | .1.3.6.1.4.1.298.1.5.1.2.5.1.5 |
| eSWGrpDescrption mandatory A description of the group module described by
this entry. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.298.1.5.1.2.5.1.6 |
| eSWGrpFanStatus mandatory The value of this object describes the fan status.
If there is more than one fan within the device,
the indication shows any failure among the fans. | column | Enumeration | .1.3.6.1.4.1.298.1.5.1.2.5.1.8 |
| eSWGrpNumofExpPorts mandatory The number of expansion ports in this group. | column | Integer32 | .1.3.6.1.4.1.298.1.5.1.2.5.1.9 |