ARICENT-TUNNEL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
19

fsTunlIfTable

table
.1.3.6.1.4.1.2076.95.1.1.1 · 1 row entry · 19 columns
Open in standard view 
The (conceptual) table containing information on
configured tunnels.
fsTunlIfEntry entry .1.3.6.1.4.1.2076.95.1.1.1.1
The (conceptual) table containing information on
configured tunnels. This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value. It can also be used for row creation.
Indexes
fsTunlIfAddressType fsTunlIfLocalInetAddress fsTunlIfRemoteInetAddress fsTunlIfEncapsMethod fsTunlIfConfigID
Column Syntax OID
fsTunlIfAddressType
The type of address in the corresponding
fsTunlIfLocalInetAddress and fsTunlIfRemoteInetAddress
objects.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.95.1.1.1.1.1
fsTunlIfLocalInetAddress
The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.95.1.1.1.1.2
fsTunlIfRemoteInetAddress
The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link (e.g., if it is a 6to4
tunnel), the val…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.95.1.1.1.1.3
fsTunlIfEncapsMethod
The encapsulation method used by the tunnel.
FsTunlType
Textual Convention: FsTunlType Enumeration
Type Values:
1other
2direct
3gre
4minimal
5l2tp
6pptp
7l2f
8udp
9atmp
10msdp
11sixToFour
12sixOverFour
13isatap
14teredo
15compat
16ipv6ip
17openflow
 .1.3.6.1.4.1.2076.95.1.1.1.1.4
fsTunlIfConfigID
An identifier used to distinguish between multiple
tunnels of the same encapsulation method, with the
same endpoints. If the encapsulation protocol only
allows one tunnel per set of endpoint addresses (such
as for GRE …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.2076.95.1.1.1.1.5
fsTunlIfHopLimit
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.95.1.1.1.1.6
fsTunlIfSecurity
The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. More specific security-related
informati…
Enumeration
Enumerated Values:
1none
2ipsec
3other
 .1.3.6.1.4.1.2076.95.1.1.1.1.7
fsTunlIfTOS
The method used to set the high 6 bits of the IPv4
TOS or IPv6 Traffic Class in the outer IP header. A
value of -1 indicates that the bits are copied from
the payload's header. A value of -2 indicates that a
traffic co…
Integer32r/w
Constraints:
range: -2-63
 .1.3.6.1.4.1.2076.95.1.1.1.1.8
fsTunlIfFlowLabel
The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
fsTunlIfAddressType indicates the tunnel is over IPv6.
A value of -1 indicates that a traffic conditioner is
invoked and mo…
FsIPv6FlowLabelOrAnyr/w
Textual Convention: FsIPv6FlowLabelOrAny Integer32
Type Constraints:
range: -1..1048575
 .1.3.6.1.4.1.2076.95.1.1.1.1.9
fsTunlIfMTU
Configured MTU of the specific tunnel entry. If set as 0,
the outgoing Link MTU will be used.
Integer32
Constraints:
range: 0-0
range: 1280-1500
 .1.3.6.1.4.1.2076.95.1.1.1.1.10
fsTunlIfDirFlag
Flag defining whether the configured tunnel is
unidirectional or bi-directional.
Enumerationr/w
Enumerated Values:
1unidirectional
2bidirectional
 .1.3.6.1.4.1.2076.95.1.1.1.1.11
fsTunlIfDirection
Flag defining whether the uni-directional tunnel
configured is incoming or out going.
Enumerationr/w
Enumerated Values:
1incoming
2outgoing
 .1.3.6.1.4.1.2076.95.1.1.1.1.12
fsTunlIfEncaplmt
The limit on how many further levels of nesting a tunnel
packet is permitted to undergo - not counting the
encapsulation in which the option itself is contained.
Default value recommended is 4. If this option is not to
…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.95.1.1.1.1.13
fsTunlIfEncapOption
Flag indicating if Encapsulation option needs to be added
or not in a tunnelled packet.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2076.95.1.1.1.1.14
fsTunlIfIndex
If the value of fsTunlIfStatus for this row
is active, then this object contains the value of
ifIndex corresponding to the tunnel interface. A
value of 0 is not legal in the active state, and means
that the interface i…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2076.95.1.1.1.1.15
fsTunlIfAlias
If the value of fsTunlIfStatus for this row
is active, then this object contains the value of
ifAlias corresponding to the tunnel interface.
The value of fsTunlIfIndex is assigned based on
the corresponding fsTunlIfAli…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2076.95.1.1.1.1.16
fsTunlIfCksumFlag
Flag indicating if checksum needs to be set in GRE header
for GRE encapsulation type
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.95.1.1.1.1.17
fsTunlIfPmtuFlag
Flag indicating if path-mtu-discovery needs to be enabled on the
tunnel interface. When enabled, path-mtu-discovery is done to set
the MTU of the tunnel interface. When disabled, the outgoing link
MTU will be used
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2076.95.1.1.1.1.18
fsTunlIfStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.

To create a row in this table for an encapsulation
method which does not support multiple parallel
tunn…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.95.1.1.1.1.19