fsTunlIfEntry
ARICENT-TUNNEL-MIB ·
.1.3.6.1.4.1.2076.95.1.1.1.1
Object
row
The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. It can also be used for row creation.
Context
- MIB
- ARICENT-TUNNEL-MIB
- OID
.1.3.6.1.4.1.2076.95.1.1.1.1- Type
- row
- Status
- current
- Parent
- fsTunlIfTable
- Table
- fsTunlIfTable
- Children
- 19
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsTunlIfAddressType The type of address in the corresponding
fsTunlIfLocalInetAddress and fsTunlIfRemoteInetAddress
objects. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2076.95.1.1.1.1.1 |
| fsTunlIfMTU Configured MTU of the specific tunnel entry. If set as 0,
the outgoing Link MTU will be used. | column | Integer32 | .1.3.6.1.4.1.2076.95.1.1.1.1.10 |
| fsTunlIfDirFlag Flag defining whether the configured tunnel is
unidirectional or bi-directional. | column | Enumeration | .1.3.6.1.4.1.2076.95.1.1.1.1.11 |
| fsTunlIfDirection Flag defining whether the uni-directional tunnel
configured is incoming or out going. | column | Enumeration | .1.3.6.1.4.1.2076.95.1.1.1.1.12 |
| fsTunlIfEncaplmt The limit on how many further levels of nesting a tunnel
packet is permitted to undergo - not counting the
encapsulation in which the option itself is contained.
Default value rec… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.95.1.1.1.1.13 |
| fsTunlIfEncapOption Flag indicating if Encapsulation option needs to be added
or not in a tunnelled packet. | column | Enumeration | .1.3.6.1.4.1.2076.95.1.1.1.1.14 |
| fsTunlIfIndex If the value of fsTunlIfStatus for this row
is active, then this object contains the value of
ifIndex corresponding to the tunnel interface. A
value of 0 is not legal in the acti… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2076.95.1.1.1.1.15 |
| fsTunlIfAlias If the value of fsTunlIfStatus for this row
is active, then this object contains the value of
ifAlias corresponding to the tunnel interface.
The value of fsTunlIfIndex is assigned… | column | OctetString | .1.3.6.1.4.1.2076.95.1.1.1.1.16 |
| fsTunlIfCksumFlag Flag indicating if checksum needs to be set in GRE header
for GRE encapsulation type | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.95.1.1.1.1.17 |
| fsTunlIfPmtuFlag Flag indicating if path-mtu-discovery needs to be enabled on the
tunnel interface. When enabled, path-mtu-discovery is done to set
the MTU of the tunnel interface. When disabled… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2076.95.1.1.1.1.18 |
| fsTunlIfStatus The status of this row, by which new entries may be
created, or old entries deleted from this table.
To create a row in this table for an encapsulation
method which… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.95.1.1.1.1.19 |
| fsTunlIfLocalInetAddress The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2076.95.1.1.1.1.2 |
| fsTunlIfRemoteInetAddress The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2076.95.1.1.1.1.3 |
| fsTunlIfEncapsMethod The encapsulation method used by the tunnel. | column | FsTunlType | .1.3.6.1.4.1.2076.95.1.1.1.1.4 |
| fsTunlIfConfigID An identifier used to distinguish between multiple
tunnels of the same encapsulation method, with the
same endpoints. If the encapsulation protocol only
allows one tunnel per set… | column | Integer32 | .1.3.6.1.4.1.2076.95.1.1.1.1.5 |
| fsTunlIfHopLimit The IPv4 TTL or IPv6 Hop Limit to use in the outer IP
header. A value of 0 indicates that the value is
copied from the payload's header. | column | Integer32 | .1.3.6.1.4.1.2076.95.1.1.1.1.6 |
| fsTunlIfSecurity The method used by the tunnel to secure the outer IP
header. The value ipsec indicates that IPsec is used
between the tunnel endpoints for authentication or
encryption or both. … | column | Enumeration | .1.3.6.1.4.1.2076.95.1.1.1.1.7 |
| fsTunlIfTOS The method used to set the high 6 bits of the IPv4
TOS or IPv6 Traffic Class in the outer IP header. A
value of -1 indicates that the bits are copied from
the payload's header. A… | column | Integer32 | .1.3.6.1.4.1.2076.95.1.1.1.1.8 |
| fsTunlIfFlowLabel The method used to set the IPv6 Flow Label value.
This object need not be present in rows where
fsTunlIfAddressType indicates the tunnel is over IPv6.
A value of -1 indicates that… | column | FsIPv6FlowLabelOrAny | .1.3.6.1.4.1.2076.95.1.1.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsTunlIfAddressType The type of address in the corresponding
fsTunlIfLocalInetAddress and fsTunlIfRemoteInetAddress
objects. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2076.95.1.1.1.1.1 |
| fsTunlIfLocalInetAddress The address of the local endpoint of the tunnel
(i.e., the source address used in the outer IP
header). If the address is unknown, the value is
0.0.0.0 for IPv4 or :: for IPv6. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2076.95.1.1.1.1.2 |
| fsTunlIfRemoteInetAddress The address of the remote endpoint of the tunnel
(i.e., the destination address used in the outer IP
header). If the address is unknown or the tunnel is
not a point-to-point link… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2076.95.1.1.1.1.3 |
| fsTunlIfEncapsMethod The encapsulation method used by the tunnel. | column | FsTunlType | .1.3.6.1.4.1.2076.95.1.1.1.1.4 |
| fsTunlIfConfigID An identifier used to distinguish between multiple
tunnels of the same encapsulation method, with the
same endpoints. If the encapsulation protocol only
allows one tunnel per set… | column | Integer32 | .1.3.6.1.4.1.2076.95.1.1.1.1.5 |