fsTunlIfConfigID

ARICENT-TUNNEL-MIB · .1.3.6.1.4.1.2076.95.1.1.1.1.5
MIB view Table view

Object

column Integer32 
An identifier used to distinguish between multiple
tunnels of the same encapsulation method, with the
same endpoints.  If the encapsulation protocol only
allows one tunnel per set of endpoint addresses (such
as for GRE or IP-in-IP), the value of this object is
1.  For encapsulation methods (such as L2F) which
allow multiple parallel tunnels, the manager is
responsible for choosing any ID which does not
conflict with an existing row, such as choosing a
random number.

Context

MIB
ARICENT-TUNNEL-MIB
OID
.1.3.6.1.4.1.2076.95.1.1.1.1.5
Type
column
Access
noaccess
Status
current
Parent
fsTunlIfEntry
Table
fsTunlIfTable
Siblings
18

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsTunlIfAddressType
The type of address in the corresponding fsTunlIfLocalInetAddress and fsTunlIfRemoteInetAddress objects.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2076.95.1.1.1.1.1
fsTunlIfMTU
Configured MTU of the specific tunnel entry. If set as 0, the outgoing Link MTU will be used.
columnInteger32.1.3.6.1.4.1.2076.95.1.1.1.1.10
fsTunlIfDirFlag
Flag defining whether the configured tunnel is unidirectional or bi-directional.
columnEnumeration.1.3.6.1.4.1.2076.95.1.1.1.1.11
fsTunlIfDirection
Flag defining whether the uni-directional tunnel configured is incoming or out going.
columnEnumeration.1.3.6.1.4.1.2076.95.1.1.1.1.12
fsTunlIfEncaplmt
The limit on how many further levels of nesting a tunnel packet is permitted to undergo - not counting the encapsulation in which the option itself is contained. Default value rec…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2076.95.1.1.1.1.13
fsTunlIfEncapOption
Flag indicating if Encapsulation option needs to be added or not in a tunnelled packet.
columnEnumeration.1.3.6.1.4.1.2076.95.1.1.1.1.14
fsTunlIfIndex
If the value of fsTunlIfStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the acti…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2076.95.1.1.1.1.15
fsTunlIfAlias
If the value of fsTunlIfStatus for this row is active, then this object contains the value of ifAlias corresponding to the tunnel interface. The value of fsTunlIfIndex is assigned…
columnOctetString.1.3.6.1.4.1.2076.95.1.1.1.1.16
fsTunlIfCksumFlag
Flag indicating if checksum needs to be set in GRE header for GRE encapsulation type
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.95.1.1.1.1.17
fsTunlIfPmtuFlag
Flag indicating if path-mtu-discovery needs to be enabled on the tunnel interface. When enabled, path-mtu-discovery is done to set the MTU of the tunnel interface. When disabled…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2076.95.1.1.1.1.18
fsTunlIfStatus
The status of this row, by which new entries may be created, or old entries deleted from this table. To create a row in this table for an encapsulation method which…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2076.95.1.1.1.1.19
fsTunlIfLocalInetAddress
The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2076.95.1.1.1.1.2
fsTunlIfRemoteInetAddress
The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2076.95.1.1.1.1.3
fsTunlIfEncapsMethod
The encapsulation method used by the tunnel.
columnFsTunlType.1.3.6.1.4.1.2076.95.1.1.1.1.4
fsTunlIfHopLimit
The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header.
columnInteger32.1.3.6.1.4.1.2076.95.1.1.1.1.6
fsTunlIfSecurity
The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. …
columnEnumeration.1.3.6.1.4.1.2076.95.1.1.1.1.7
fsTunlIfTOS
The method used to set the high 6 bits of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A…
columnInteger32.1.3.6.1.4.1.2076.95.1.1.1.1.8
fsTunlIfFlowLabel
The method used to set the IPv6 Flow Label value. This object need not be present in rows where fsTunlIfAddressType indicates the tunnel is over IPv6. A value of -1 indicates that…
columnFsIPv6FlowLabelOrAny.1.3.6.1.4.1.2076.95.1.1.1.1.9