ARICENT-SNOOP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
181

fsSnoopInstanceGlobalTable

table
.1.3.6.1.4.1.2076.105.2.1 · 1 row entry · 8 columns
Open in standard view 
This table contains multicast forwarding mode configuration
for each instance running in the snooping switch
fsSnoopInstanceGlobalEntry entry .1.3.6.1.4.1.2076.105.2.1.1
This table contains instance number and the multicast
forwarding mode configuration for the particular instance
Indexes
fsSnoopInstanceGlobalInstId
Column Syntax OID
fsSnoopInstanceGlobalInstId
Instance ID pertaining to the global configuration entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.105.2.1.1.1
fsSnoopInstanceGlobalMcastFwdMode
Indicates the mode to be used for building the forwarding
table i.e, whether IP based or MAC address based.
The hardware should support programming of S,G and *,G
entries for IGS/MLDS to operate in 'ipbased' mode.
If…
Enumerationr/w
Enumerated Values:
1ipbased
2macbased
 .1.3.6.1.4.1.2076.105.2.1.1.2
fsSnoopInstanceGlobalSystemControl
Snooping module is shutdown or started through this object.
When set to 'start', resources required by the
SNOOP module is allocated and the module starts running.
When set to 'shutdown', all the resources are rele…
Enumerationr/w
Enumerated Values:
1start
2shutdown
 .1.3.6.1.4.1.2076.105.2.1.1.3
fsSnoopInstanceGlobalLeaveConfigLevel
A global configuration to specify if the leave processing
mechanism needs to be configured at the vlan level or at
the port level.
When this object is set to vlanbased, the mib object
fsSnoopVlanFastLeave must be used…
Enumerationr/w
Enumerated Values:
1vlanbased
2portbased
 .1.3.6.1.4.1.2076.105.2.1.1.4
fsSnoopInstanceGlobalEnhancedMode
This object is used to enable or disable the snooping module
functioning in the enhanced mode.

By default, the snooping module operates in the normal or
default mode. In the default mode, the module mul…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2076.105.2.1.1.5
fsSnoopInstanceGlobalReportProcessConfigLevel
A global configuration to specify if the report processing
mechanism needs to be configured for the non-router ports or
at the all ports level.
When this object is set to non-router ports, the incoming
report messages a…
Enumerationr/w
Enumerated Values:
1nonrouterports
2allports
 .1.3.6.1.4.1.2076.105.2.1.1.6
fsSnoopInstanceGlobalSparseMode
This object is used to enable or disable the snooping module
functioning in the sparse mode.

By default, the snooping module operates in sparse
mode. In the sparse mode (i.e Sparse mode is enabled),
the…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2076.105.2.1.1.7
fsSnoopInstanceControlPlaneDriven
Control plane driven approach is used to update forwarding table
based on the report messages. This object is used to
enable or disable the control plane driven approach in snooping module.
By default, control plane dri…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2076.105.2.1.1.8

fsSnoopInstanceConfigTable

table
.1.3.6.1.4.1.2076.105.2.2 · 1 row entry · 21 columns
Open in standard view 
This table contains global configuration of snooping for each 
instance running in switch
fsSnoopInstanceConfigEntry entry .1.3.6.1.4.1.2076.105.2.2.1
This table contains instance number, address type and the list of
global configuration for the particular instance and address type
Indexes
fsSnoopInstanceConfigInstId fsSnoopInetAddressType
Column Syntax OID
fsSnoopInstanceConfigInstId
Instance ID pertaining to the global configuration entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.105.2.2.1.1
fsSnoopInetAddressType
Inet Address Type corresponding to the global configuration entry.
This indicates whether the row is for IGMP/MLD Snooping
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.2.2.1.2
fsSnoopStatus
Enables or disables IGMP/MLD snooping in the system.
When set to 'enabled', the IGS/MLDS module starts
protocol operations.
When set to 'disabled', the IGS/MLDS module stops performing
protocol operations.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.3
fsSnoopProxyReportingStatus
Enables or disables proxy-reporting in the system.
When proxy-reporting is 'enabled' the switch generates
reports and forwards them to the router based on the
available host information.
When proxy-reporting is 'disab…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.4
fsSnoopRouterPortPurgeInterval deprecated
This is the interval (in seconds) after which a learnt
router port entry will be purged. For each router port learnt,
this timer runs for 'RouterPortPurgeInterval' seconds.When the
timer expires, the learnt router p…
Integer32r/w
Constraints:
range: 60-600
 .1.3.6.1.4.1.2076.105.2.2.1.5
fsSnoopPortPurgeInterval deprecated
This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received, this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.2.2.1.6
fsSnoopReportForwardInterval
This timer is used when both proxy and proxy-reporting is
disabled. The switch then has to suppress multiple
IGMPv2/ MLDv1 report messages for the same group from being
forwarded to the router.
This is the interval (…
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.2076.105.2.2.1.7
fsSnoopRetryCount
In proxy/proxy-reporting mode, when the switch receives leave
message on a port, it sends group specific query to check if
there are any other interested v2 receivers for the group.
This attribute defines the maximum…
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.2076.105.2.2.1.8
fsSnoopGrpQueryInterval
The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there are any interested receivers. The switch will send
'fsSnoopRetryCount' queries be…
Integer32r/w
Constraints:
range: 2-5
 .1.3.6.1.4.1.2076.105.2.2.1.9
fsSnoopReportFwdOnAllPorts
In snooping mode, Snooping module will forward reports only
on router ports by default. This object provides administrative
control either to forward the reports on all the member ports of the
VLAN or to forward the r…
Enumerationr/w
Enumerated Values:
1allports
2rtrports
3nonedgeports
 .1.3.6.1.4.1.2076.105.2.2.1.10
fsSnoopTraceOption
This object is used to enable trace statements in
snooping module.
A four byte integer is used for enabling the trace level.
Each bit in the four byte integer represents a particular
trace level.
The mapping be…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.2.2.1.11
fsSnoopOperStatus
The operational status of the IGS/MLDS protocol.
The value enabled(1) indicates the IGS/MLDS module is currently
enabled in the system.
The value disable(1) indicates the IGS/MLDS module is currently
disabled in the sys…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.12
fsSnoopSendQueryOnTopoChange
The Snooping Switch can be configured to send IGMP/MLD General
queries on all non router ports when spanning tree topology
change occurs in a network. If the spanning tree mode is RSTP,
IGMP/MLD general queries will b…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.13
fsSnoopSendLeaveOnTopoChange
The Snooping Switch can be configured to issue an IGMP proxy
query solicitation on network ports, i.e. an IGMP Group Leave
with group address 0.0.0.0. This will indicate to the upstream
router that it immediately nee…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.14
fsSnoopFilterStatus
This object is used to enable/disable the IGS filtering feature.
Interface mapping configurations will not be affected by this object
status.
When this object is disabled, filters will not be applied in this
instance …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.15
fsSnoopMulticastVlanStatus
This object is used to enable/disable the Multicast VLAN feature.
When Multicast VLAN feature is enabled, each incoming untagged report
or leave message will be classified to an M-VLAN, depending on
whether any M-VLA…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.16
fsSnoopProxyStatus
This object enables or disables Proxy in the system.
Proxy can be enabled only if Proxy-reporting is disabled.
In proxy mode, the switch act as querier for all
downstream interfaces, act as host for all
upstream…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.17
fsSnoopQueryFwdOnAllPorts
In proxy and proxy reporting mode, Snooping module will send
query messages only to the non-router ports by default.
This object provides administrative control to forward the
query messages on all the member ports of …
Enumerationr/w
Enumerated Values:
1allports
2nonrtrports
 .1.3.6.1.4.1.2076.105.2.2.1.18
fsSnoopFwdGroupsCnt
Provide Forwarding DataBase Group Count for Particular instance and
Address Type.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.2.2.1.19
fsSnoopDebugOption
This object is used to enable debug statements in
snooping module.
A four byte integer is used for enabling the debug level.
Each bit in the four byte integer represents a particular
debug level.
The mapping between the…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.2.2.1.20
fsSnoopEnforceRouterAlert
Enables or disables IGMP/MLD enforcement of the
Router Alert option presence.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.2.2.1.21

fsSnoopVlanMcastMacFwdTable

table
.1.3.6.1.4.1.2076.105.3.1 · 1 row entry · 7 columns
Open in standard view 
This table contains MAC based multicast forwarding 
information. This information is applicable only if
the 'fsSnoopMcastForwardingMode' is set to 'macbased'
fsSnoopVlanMcastMacFwdEntry entry .1.3.6.1.4.1.2076.105.3.1.1
This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded.
Indexes
fsSnoopVlanMcastMacFwdInstId fsSnoopVlanMcastMacFwdVlanId fsSnoopVlanMcastMacFwdInetAddressType fsSnoopVlanMcastMacFwdGroupAddress
Column Syntax OID
fsSnoopVlanMcastMacFwdInstId
Instance ID pertaining to the Multicast forwarding entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.105.3.1.1.1
fsSnoopVlanMcastMacFwdVlanId
VLAN ID pertaining to the Multicast forwarding entry
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.105.3.1.1.2
fsSnoopVlanMcastMacFwdInetAddressType
InetAddressType pertaining to the Multicast forwarding entry
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.3.1.1.3
fsSnoopVlanMcastMacFwdGroupAddress
Multicast group MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2076.105.3.1.1.4
fsSnoopVlanMcastMacFwdPortList
List of ports onto which the multicast data
packets destined for this group will be forwarded.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.1.1.5
fsSnoopVlanMcastMacFwdLocalPortList
List of ports onto which the multicast data packets destined
for this group will be forwarded. Each bit in this object
represent interfaces denoted by the object fsVcHlPortId
associated to the instance identifier den…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.1.1.6
fsSnoopVlanMcastMacFwdEntryFlag
This flag tell about the entry type: either it is a
Static group entry or it is a Dynamic group entry
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.3.1.1.7

fsSnoopVlanMcastIpFwdTable

table deprecated
.1.3.6.1.4.1.2076.105.3.2 · 1 row entry · 7 columns
Open in standard view 
This table contains IP based multicast forwarding 
information. This information is applicable only if
the 'fsSnoopInstMcastForwardingMode' is set to 'ip-based'.
This table and all its objects are being deprecated. The
fsSnoopVlanIpFwdTable is to be used instead.
fsSnoopVlanMcastIpFwdEntry entry .1.3.6.1.4.1.2076.105.3.2.1
This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded.
Indexes
fsSnoopVlanMcastIpFwdInstId fsSnoopVlanMcastIpFwdVlanId fsSnoopVlanMcastIpFwdAddressType fsSnoopVlanMcastIpFwdSourceAddress fsSnoopVlanMcastIpFwdGroupAddress
Column Syntax OID
fsSnoopVlanMcastIpFwdInstId deprecated
Instance ID pertaining to the Multicast forwarding entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.105.3.2.1.1
fsSnoopVlanMcastIpFwdVlanId deprecated
VLAN ID pertaining to the Multicast forwarding entry
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.105.3.2.1.2
fsSnoopVlanMcastIpFwdAddressType deprecated
InetAddressType pertaining to the Multicast forwarding entry
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.3.2.1.3
fsSnoopVlanMcastIpFwdSourceAddress deprecated
Unicast source address of the data source that sends
multicast data for this group
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.105.3.2.1.4
fsSnoopVlanMcastIpFwdGroupAddress deprecated
IP/IPv6 multicast group address
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.105.3.2.1.5
fsSnoopVlanMcastIpFwdPortList deprecated
List of ports onto which the multicast data
packets destined for this source and group will be forwarded.
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.2.1.6
fsSnoopVlanMcastIpFwdEntryFlag
This flag tell about the entry type: either it is a
Static group entry or it is a Dynamic group entry
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.3.2.1.7

fsSnoopVlanRouterTable

table
.1.3.6.1.4.1.2076.105.3.3 · 1 row entry · 5 columns
Open in standard view 
This table contains the list of ports through which 
a router, in a particular VLAN is reachable.
fsSnoopVlanRouterEntry entry .1.3.6.1.4.1.2076.105.3.3.1
Contains the VLAN ID and list of ports on which
routers are present in the VLAN.
Indexes
fsSnoopVlanRouterInstId fsSnoopVlanRouterVlanId fsSnoopVlanRouterInetAddressType
Column Syntax OID
fsSnoopVlanRouterInstId
Instance ID pertaining to the router port entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.105.3.3.1.1
fsSnoopVlanRouterVlanId
VLAN ID of the ports through which router is reachable.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.105.3.3.1.2
fsSnoopVlanRouterInetAddressType
It indicates whether the row belongs to IGMP / MLD snooping.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.3.3.1.3
fsSnoopVlanRouterPortList
List of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically. This object may not be sufficient to represent the
ful…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.3.1.4
fsSnoopVlanRouterLocalPortList
List of ports on which routers are present. These router ports
are learnt through control messages received from routers, and
can also be configured statically. Each bit in this object
represent interfaces denoted by…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.3.1.5

fsSnoopVlanFilterTable

table
.1.3.6.1.4.1.2076.105.3.4 · 1 row entry · 19 columns
Open in standard view 
This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is  
enabled in the system.
fsSnoopVlanFilterEntry entry .1.3.6.1.4.1.2076.105.3.4.1
Contains snooping status , version and fast leave
configuration for a specific VLAN.
Indexes
fsSnoopVlanFilterInstId fsSnoopVlanFilterVlanId fsSnoopVlanFilterInetAddressType
Column Syntax OID
fsSnoopVlanFilterInstId
Instance ID pertaining to VLAN filter table entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.105.3.4.1.1
fsSnoopVlanFilterVlanId
VLAN ID for which snooping configuration is to be done.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.105.3.4.1.2
fsSnoopVlanFilterInetAddressType
Indicates whether the row belongs to IGS/MLD snooping
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.3.4.1.3
fsSnoopVlanSnoopStatus
Enables or disables IGS/MLDS on that specific VLAN
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.3.4.1.4
fsSnoopVlanOperatingVersion deprecated
Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2).
This object is deprecated. Its functi…
Enumeration
Enumerated Values:
1v1
2v2
3v3
 .1.3.6.1.4.1.2076.105.3.4.1.5
fsSnoopVlanCfgOperVersion deprecated
Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e., V2(2).
The 'fsSnoopVlanCfgOperVersion' sho…
Enumerationr/w
Enumerated Values:
1v1
2v2
3v3
 .1.3.6.1.4.1.2076.105.3.4.1.6
fsSnoopVlanFastLeave
Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message the switch checks
if they are any interested receivers for the group by sending
a group specific query before removing…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.3.4.1.7
fsSnoopVlanQuerier
Indicates whether the switch is configured as a querier in the VLAN
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.3.4.1.8
fsSnoopVlanCfgQuerier
The snooping switch can be configured to send IGMP/MLD queries
when IGMP/MLD routers are not present in the VLAN. When set to
'enabled' the switch will generate general query messages.
The query messages will be supp…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.3.4.1.9
fsSnoopVlanQueryInterval
This is the interval (in seconds) for which the switch
sends general queries in proxy and proxy-reporting mode.
In proxy-reporting mode, General queries will be sent
on all downstream interfaces with this interval only…
Integer32r/w
Constraints:
range: 60-600
 .1.3.6.1.4.1.2076.105.3.4.1.10
fsSnoopVlanRtrPortList
List of ports which are configured statically as router ports.
statically. This object may not be sufficient to represent the
full set of interfaces in each switch instance in environments
where the number of interfaces…
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.4.1.11
fsSnoopVlanRowStatus
The status of a row in the VLAN filter table. Using this
object, new entries can be created in the VLAN filter table
and the existing entries can be removed from the
VLAN filter table
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.105.3.4.1.12
fsSnoopVlanStartupQueryCount
The Startup Query Count is the number of Queries sent out on
startup, separated by the Startup Query Interval.
Integer32r/w
Constraints:
range: 2-5
 .1.3.6.1.4.1.2076.105.3.4.1.13
fsSnoopVlanStartupQueryInterval
Interval between the general query messages sent by the switch
during startup of querier election process.
This value is (Query Interval/4)
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.3.4.1.14
fsSnoopVlanOtherQuerierPresentInterval
The Other Querier Present Interval is the length of time that
must pass before a multicast router decides that there is no
longer another multicast router which should be the querier.
This value is ((Robustness Varia…
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.3.4.1.15
fsSnoopVlanQuerierIpAddress
The IpAddress to be used in Query Message.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.105.3.4.1.16
fsSnoopVlanQuerierIpFlag
If the vlan querier IP flag is enabled but querier ip is not configured,
either IP Address of interface vlan or default vlan interface ip address will
be used as source ip address in query message
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.105.3.4.1.17
fsSnoopVlanElectedQuerier
This object specifies the IpAddress of elected querier.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2076.105.3.4.1.18
fsSnoopVlanRobustnessValue
The Robustness Variable allows tuning for the expected packet loss on
a subnet. If a subnet is expected to be lossy, the Robustness variable
may be increased
Unsigned32r/w
Constraints:
range: 2-7
 .1.3.6.1.4.1.2076.105.3.4.1.19

fsSnoopVlanMcastGroupTable

table
.1.3.6.1.4.1.2076.105.3.5 · 1 row entry · 7 columns
Open in standard view 
This table contains the information about dynamically learnt
multicast groups and the ports on which they are learnt.
When enhanced mode is enabled this table will be populated 
with both Outer and Inner VLAN. When operating in the default 
mode this table will be populated with the Outer VLAN alone and 
the Inner VLAN will be considered to have a value of zero. When
the Snoop module receives a packet classified to a single VLAN
(such as the CVLAN in Customer Bridges, or SVLAN in 802.1ad
Bridges), then this single VLAN is considered to be the Outer 
VLAN and the Inner VLAN will have a value of zero.
fsSnoopVlanMcastGroupEntry entry .1.3.6.1.4.1.2076.105.3.5.1
Contains the information learnt about a multicast group.
Indexes
fsSnoopVlanMcastGroupInstanceId fsSnoopVlanMcastGroupOuterVlanId fsSnoopVlanMcastGroupInetAddressType fsSnoopVlanMcastGroupAddress fsSnoopVlanMcastGroupInnerVlanId
Column Syntax OID
fsSnoopVlanMcastGroupInstanceId
Instance Id pertaining to a particular virtual context.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.105.3.5.1.1
fsSnoopVlanMcastGroupOuterVlanId
The outer vlan id on which the multicast group is learnt.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.2076.105.3.5.1.2
fsSnoopVlanMcastGroupInetAddressType
Inet Address Type corresponding to this group entry.
This indicates whether the row is for IGMP/MLD Snooping
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.3.5.1.3
fsSnoopVlanMcastGroupAddress
The Multicast group address learnt.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.105.3.5.1.4
fsSnoopVlanMcastGroupInnerVlanId
The inner vlan id on which the multicast group is learnt.
InnerVlanIndex
Textual Convention: InnerVlanIndex Unsigned32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2076.105.3.5.1.5
fsSnoopVlanMcastGroupPortList
The list of interfaces on which the group entry is learnt.
statically. This object may not be sufficient to represent the
full set of interfaces in each switch instance in environments
where the number of interfaces in …
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.5.1.6
fsSnoopVlanMcastGroupLocalPortList
The list of interfaces on which the group entry is learnt.
Each bit in this object represent interfaces denoted by the
object fsVcHlPortId associated to the instance identifier
denoted by fsSnoopVlanMcastGroupInstanc…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.5.1.7

fsSnoopVlanMcastReceiverTable

table
.1.3.6.1.4.1.2076.105.3.6 · 1 row entry · 4 columns
Open in standard view 
This table contains the information about dynamically
learnt multicast groups, the source ip of the hosts 
sending the multicast reports and the registered sources
from which the multicast data is requested.
fsSnoopVlanMcastReceiverEntry entry .1.3.6.1.4.1.2076.105.3.6.1
Contains an entry for each multicast report sent by each host
for a multicast group and requesting data from a specific
source.
Indexes
fsSnoopVlanMcastGroupInstanceId fsSnoopVlanMcastGroupOuterVlanId fsSnoopVlanMcastGroupInetAddressType fsSnoopVlanMcastGroupAddress fsSnoopVlanMcastGroupInnerVlanId fsSnoopVlanMcastReceiverPortIndex fsSnoopVlanMcastReceiverHostAddress fsSnoopVlanMcastReceiverSourceAddress
Column Syntax OID
fsSnoopVlanMcastReceiverPortIndex
The interface on which the multicast group address is learnt.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.105.3.6.1.1
fsSnoopVlanMcastReceiverHostAddress
The IP address of the multicast receiver that has sent
the multicast report to join this group.
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.105.3.6.1.2
fsSnoopVlanMcastReceiverSourceAddress
Unicast source address of the data source that sends
multicast data for this group
OctetString
Constraints:
range: 16-16
 .1.3.6.1.4.1.2076.105.3.6.1.3
fsSnoopVlanMcastReceiverFilterMode
The include or the exclude mode that has been
registered by the multicast receiver for the
unicast source address specified.
Enumeration
Enumerated Values:
1include
2exclude
 .1.3.6.1.4.1.2076.105.3.6.1.4

fsSnoopVlanIpFwdTable

table
.1.3.6.1.4.1.2076.105.3.7 · 1 row entry · 8 columns
Open in standard view 
This table contains IP multicast forwarding information 
based on both Outer VLAN and Inner VLAN.                 
          
When enhanced mode is enabled this table will be populated 
with both Outer and Inner VLAN. When operating in the default mode 
this table will be populated with the Outer VLAN alone and the 
Inner VLAN will be considered to have a value of zero. When
the Snoop module receives a packet classified to a single VLAN
(such as the CVLAN in Customer Bridges, or SVLAN in 802.1ad
Bridges), then this single VLAN is considered to be the Outer VLAN
and the Inner VLAN will have a value of zero. 
          
The information present in this table is applicable only if the 
object 'fsSnoopInstMcastForwardingMode' is set to 'ip-based'.
fsSnoopVlanIpFwdEntry entry .1.3.6.1.4.1.2076.105.3.7.1
This table contains Outer VLAN ID, unicast source address,
multicast group address, Inner VLAN ID and the list of ports onto
which the multicast data packets for the group should be
forwarded.
Indexes
fsSnoopVlanIpFwdInstanceId fsSnoopVlanIpFwdOuterVlanId fsSnoopVlanIpFwdInetAddressType fsSnoopVlanIpFwdSourceAddress fsSnoopVlanIpFwdGroupAddress fsSnoopVlanIpFwdInnerVlanId
Column Syntax OID
fsSnoopVlanIpFwdInstanceId
Instance Id pertaining to a particular virtual context.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2076.105.3.7.1.1
fsSnoopVlanIpFwdOuterVlanId
The outer vlan id on which the multicast group is learnt.
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.2076.105.3.7.1.2
fsSnoopVlanIpFwdInetAddressType
Inet Address Type corresponding to this forwarding table
entry. This indicates whether the row is for IGMP/MLD Snooping
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.3.7.1.3
fsSnoopVlanIpFwdSourceAddress
Unicast source address of the data source that sends
multicast data for this group
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.105.3.7.1.4
fsSnoopVlanIpFwdGroupAddress
The Multicast group address learnt.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.105.3.7.1.5
fsSnoopVlanIpFwdInnerVlanId
The inner vlan id on which the multicast group is learnt.
InnerVlanIndex
Textual Convention: InnerVlanIndex Unsigned32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2076.105.3.7.1.6
fsSnoopVlanIpFwdPortList
List of ports onto which the multicast data
packets from this source, destined for this group,
will be forwarded statically. This object may not be sufficient
to represent the full set of interfaces in each switch in…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.7.1.7
fsSnoopVlanIpFwdLocalPortList
List of ports onto which the multicast data packets from this
source destined for this group, will be forwarded.
Each bit in this object represent interfaces denoted by the
object fsVcHlPortId associated to the insta…
Q-BRIDGE-MIBPortList
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.7.1.8

fsSnoopVlanFilterXTable

table
.1.3.6.1.4.1.2076.105.3.8 · 1 row entry · 10 columns
Open in standard view 
This table is an extention table of fsSnoopVlanFilterTable
fsSnoopVlanFilterXEntry entry .1.3.6.1.4.1.2076.105.3.8.1
Each entry contains configurations for specific VLANs
Indexes
No indexes recorded
Column Syntax OID
fsSnoopVlanBlkRtrPortList
List of ports which are configured statically as blocked router
ports statically. This object may not be sufficient to represent
full set of interfaces in each switch instance in environments
where the number of inte…
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.8.1.1
fsSnoopVlanFilterMaxLimitType
Indicates the type of limit to be applied on this VLAN.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set for …
Enumerationr/w
Enumerated Values:
0none
1groups
2channels
 .1.3.6.1.4.1.2076.105.3.8.1.2
fsSnoopVlanFilterMaxLimit
Sets the maximum number of unique entries (channel or group)
that can be learned simultaneously on this VLAN. The
fsSnoopVlanFilterMaxLimitType must be set before configuring
this object. If fsSnoopVlanFilterMaxLimit…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.3.8.1.3
fsSnoopVlanFilter8021pPriority
Configures the priority with which the reports assigned to this
VLAN should be processed by the hardware as well as by the
upstream router. Priority 0 means lowest priority while priority
7 means highest priority. This …
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.2076.105.3.8.1.4
fsSnoopVlanFilterDropReports
Some implementations might require that IGMPv1 should not be
supported, as IGMPv1 does not have any group leaving mechanism.
Some other implementations might require that both IGMPv1 and
IGMPv2 reports should be dropped…
Enumerationr/w
Enumerated Values:
0none
1igmpv1
2igmpv2
3all
 .1.3.6.1.4.1.2076.105.3.8.1.5
fsSnoopVlanMulticastProfileId
This object contains the multicast profile id configured for a
particular VLAN and is used for multicast vlan classification.
When any untagged report or leave message is received (i.e. packet
with no tag in a Custome…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.3.8.1.6
fsSnoopVlanPortPurgeInterval
This is the interval (in seconds) after which a learnt
port entry will be purged. For each port on which report
has been received,this timer runs for 'PortPurgeInterval'
seconds. This timer will be restarted whenever …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.3.8.1.7
fsSnoopVlanMaxResponseTime
The maximum response code advertised in queries send over this
vlan.This object is used to configure max response code for
both IGS and MLDS.Minimum value for the object is zero for both
IGS and MLDS. Max value and defa…
Integer32r/w
Constraints:
range: 1-65025
 .1.3.6.1.4.1.2076.105.3.8.1.8
fsSnoopVlanRtrLocalPortList
List of ports which are configured statically as router ports.
Each bit in this object represent interfaces denoted by the
object fsVcHlPortId associated to the instance identifier
denoted by fsSnoopVlanFilterInstId.…
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.8.1.9
fsSnoopVlanBlkRtrLocalPortList
List of ports which are configured statically as blocked router
ports. Each bit in this object represent interfaces denoted by
the object fsVcHlPortId associated to the instance identifier
denoted by fsSnoopVlanFilte…
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.8.1.10

fsSnoopVlanStaticMcastGrpTable

table
.1.3.6.1.4.1.2076.105.3.9 · 1 row entry · 7 columns
Open in standard view 
This table contains IP based multicast forwarding 
information.
fsSnoopVlanStaticMcastGrpEntry entry .1.3.6.1.4.1.2076.105.3.9.1
This table contains VLAN ID, unicast source address ,
multicast group address and the list of ports onto which the
multicast data packets for group should be forwarded.
Indexes
fsSnoopVlanStaticMcastGrpInstId fsSnoopVlanStaticMcastGrpVlanId fsSnoopVlanStaticMcastGrpAddressType fsSnoopVlanStaticMcastGrpSourceAddress fsSnoopVlanStaticMcastGrpGroupAddress
Column Syntax OID
fsSnoopVlanStaticMcastGrpInstId
Instance ID pertaining to the Multicast forwarding entry.
Currently only one instance is supported so it is always 1
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.2076.105.3.9.1.1
fsSnoopVlanStaticMcastGrpVlanId
VLAN ID pertaining to the Multicast forwarding entry
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.105.3.9.1.2
fsSnoopVlanStaticMcastGrpAddressType
InetAddressType pertaining to the Multicast forwarding entry
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.3.9.1.3
fsSnoopVlanStaticMcastGrpSourceAddress
Unicast source address of the data source that sends
multicast data for this group
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.105.3.9.1.4
fsSnoopVlanStaticMcastGrpGroupAddress
IP/IPv6 multicast group address
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2076.105.3.9.1.5
fsSnoopVlanStaticMcastGrpPortList
List of ports onto which the multicast data
packets destined for this source and group will be forwarded.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.2076.105.3.9.1.6
fsSnoopVlanStaticMcastGrpRowStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.105.3.9.1.7

fsSnoopStatsTable

table
.1.3.6.1.4.1.2076.105.4.1 · 1 row entry · 46 columns
Open in standard view 
This table contains snooping statistics  
maintained by the switch. The statistics are
maintained on a per VLAN basis.
fsSnoopStatsEntry entry .1.3.6.1.4.1.2076.105.4.1.1
Contains snooping statistics for a particular VLAN.
Indexes
fsSnoopStatsInstId fsSnoopStatsVlanId fsSnoopStatsInetAddressType
Column Syntax OID
fsSnoopStatsInstId
Instance ID pertaining for the statistics entry.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2076.105.4.1.1.1
fsSnoopStatsVlanId
VLAN ID for which snooping statistics are displayed
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.2076.105.4.1.1.2
fsSnoopStatsInetAddressType
Indicates whether the statistics are for IGS/MLDS
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.4.1.1.3
fsSnoopStatsRxGenQueries
Provides the statistics of General Queries received by the
snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.4
fsSnoopStatsRxGrpQueries
Provides the statistics of Group Specific Queries received
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.5
fsSnoopStatsRxGrpAndSrcQueries
Provides the statistics of Group and Source Specific Queries
received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.6
fsSnoopStatsRxAsmReports
Provides the statistics of IGMPv1/IGMPv2 Membership reports
received by the snooping switch. In case of MLDS, it provides
the statistics of MLDv1 membership reports.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.7
fsSnoopStatsRxSsmReports
Provides the statistics of IGMPv3/MLDv2 Membership reports
received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.8
fsSnoopStatsRxSsmIsInMsgs
Provides the statistics of IGMPv3/MLDv2 Membership reports
of type IS_IN received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.9
fsSnoopStatsRxSsmIsExMsgs
Provides the statistics of IGMPv3/MLDv2 Membership reports
of type IS_EX received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.10
fsSnoopStatsRxSsmToInMsgs
Provides the statistics of IGMPv3/MLDv2 Membership reports
of type TO_IN received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.11
fsSnoopStatsRxSsmToExMsgs
Provides the statistics of IGMPv3/MLDv2 Membership reports
of type TO_EX received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.12
fsSnoopStatsRxSsmAllowMsgs
Provides the statistics of IGMPv3/MLDv2 Membership reports
of type ALLOW received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.13
fsSnoopStatsRxSsmBlockMsgs
Provides the statistics of IGMPv3/MLDv2 Membership reports
of type BLOCK received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.14
fsSnoopStatsRxAsmLeaves
Provides the statistics of IGMPv2/MLDv1 Leave messages
received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.15
fsSnoopStatsTxGenQueries
Provides the statistics of General Queries transmitted by the
snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.16
fsSnoopStatsTxGrpQueries
Provides the statistics of Group Specific Queries transmitted
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.17
fsSnoopStatsTxGrpAndSrcQueries
Provides the statistics of Group and Source Specific Queries
transmitted by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.18
fsSnoopStatsTxAsmReports
Provides the statistics of IGMPv1/IGMPv2 Membership reports
transmitted by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.19
fsSnoopStatsTxSsmReports
Provides the statistics of IGMPv3/MLDv2 Membership reports
transmitted by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.20
fsSnoopStatsTxAsmLeaves
Provides the statistics of IGMPv2/MLDv1 Leave messages
transmitted by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.21
fsSnoopStatsDroppedPkts
Provides the number of erroneous IGMP/MLD packets dropped
by the snooping switch due to failure in checksum
calculation.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.22
fsSnoopStatsUnsuccessfulJoins
Provides the total number of IGMP groups or channels dropped,
because the maximum limit of groups or channels allowed for the
VLAN has been reached. By default, this object is for groups,
but if fsSnoopVlanFilterMaxL…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.23
fsSnoopStatsActiveJoins
Provides the total number of IGMP groups or channels active
on this VLAN at the given time. By default, this object is for
groups, but if fsSnoopVlanFilterMaxLimitType is 'channels' this
object is for channels (S,G) …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.24
fsSnoopStatsActiveGroups
Provides the total number of IGMP groups or channels active
on this VLAN at the given time.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.25
fsSnoopStatsRxV1Report
Provides the statistics of IGMPv1 Membership reports
received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.26
fsSnoopStatsRxV2Report
Provides the statistics of IGMPv2 Membership reports
received by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.27
fsSnoopStatsTxV1Report
Provides the statistics of IGMPv1 Membership reports
transmitted by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.28
fsSnoopStatsTxV2Report
Provides the statistics of IGMPv2 Membership reports
transmitted by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.29
fsSnoopStatsDropV1GenQueries
Provides the statistics of IGMPv1 General Queries that are dropped
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.30
fsSnoopStatsDropV2GenQueries
Provides the statistics of IGMPv2 General Queries that are dropped
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.31
fsSnoopStatsDropV3GenQueries
Provides the statistics of IGMPv3 General Queries that are dropped
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.32
fsSnoopStatsDropV2GrpQueries
Provides the statistics of Group specific Queries that are dropped
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.33
fsSnoopStatsDropV3GrpQueries
Provides the statistics of Group specific Queries that are dropped
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.34
fsSnoopStatsDropGrpAndSrcQueries
Provides the statistics of Group and source specific
Queries that are dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.35
fsSnoopStatsDropV1Reports
Provides the statistics of IGMPv1 reports that
are dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.36
fsSnoopStatsDropV2Reports
Provides the statistics of IGMPv2 reports that
are dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.37
fsSnoopStatsDropSsmIsInMsgs
Provides the statistics of IGMPv3 Membership reports
of type IS_INCLUDE dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.38
fsSnoopStatsDropSsmIsExMsgs
Provides the statistics of IGMPv3 Membership reports
of type IS_EXCLUDE dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.39
fsSnoopStatsDropSsmToInMsgs
Provides the statistics of IGMPv3 Membership reports
of type TO_INCLUDE dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.40
fsSnoopStatsDropSsmToExMsgs
Provides the statistics of IGMPv3 Membership reports
of type TO_EXCLUDE dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.41
fsSnoopStatsDropSsmAllowMsgs
Provides the statistics of IGMPv3 Membership reports
of type ALLOW dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.42
fsSnoopStatsDropSsmBlockMsgs
Provides the statistics of IGMPv3 Membership reports
of type BLOCK dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.43
fsSnoopStatsDropAsmLeaves
Provides the statistics of IGMPv2 Leave messages
dropped by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.44
fsSnoopStatsFwdGenQueries
Provides the statistics of IGMPv2 General Queries forwarded
by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.45
fsSnoopStatsFwdGrpQueries
Provides the statistics of IGMPv2 Group Specific General
Queries forwarded by the snooping switch.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.4.1.1.46

fsSnoopPortTable

table
.1.3.6.1.4.1.2076.105.5.1 · 1 row entry · 11 columns
Open in standard view 
This table contains Port-related configurable information.
This table is applicable only when the snooping module is 
operating in the default Mode. This table MUST NOT be 
configured when the snooping module is operating in the 
enhanced mode.
fsSnoopPortEntry entry .1.3.6.1.4.1.2076.105.5.1.1
This table contains the list of parameters/attributes objects
that can be configured on a port.
Indexes
fsSnoopPortIndex fsSnoopPortInetAddressType
Column Syntax OID
fsSnoopPortIndex
The interface index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.105.5.1.1.1
fsSnoopPortInetAddressType
Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.5.1.1.2
fsSnoopPortLeaveMode
Sets the mechanism to be used for processing the leave messages
in the down stream interface.

When this object is set to 'explicitHostTrack', then the leave
messages are processed using the explicit hos…
Enumerationr/w
Enumerated Values:
1explicithosttrack
2fastleave
3normalleave
 .1.3.6.1.4.1.2076.105.5.1.1.3
fsSnoopPortRateLimit
Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsigned integer and will not rate limit any…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.1.1.4
fsSnoopPortMaxLimitType
Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set…
Enumerationr/w
Enumerated Values:
0none
1groups
2channels
 .1.3.6.1.4.1.2076.105.5.1.1.5
fsSnoopPortMaxLimit
Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The fsSnoopPortMaxLimitType must be set before configuring
this object. However the Max-limit i…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.1.1.6
fsSnoopPortProfileId
The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received
through this downstream interface. By …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.1.1.7
fsSnoopPortMemberCnt
Provides the total number of groups or channels active on the
interface at the given time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.1.1.8
fsSnoopPortMaxBandwidthLimit
Sets the Maximum bandwidth allowed on this port for Multicast.
The fsSnoopPortMaxLimitType must be set before configuring
this object. If the fsSnoopPortMaxLimitType is 'channels',
this limit applies to the bandwidth …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.1.1.9
fsSnoopPortDropReports
This object decides whether to process or drop the
IGMP reports coming on this port.
Enumerationr/w
Enumerated Values:
1allow
2drop
 .1.3.6.1.4.1.2076.105.5.1.1.10
fsSnoopPortRowStatus
The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.105.5.1.1.11

fsSnoopEnhPortTable

table
.1.3.6.1.4.1.2076.105.5.2 · 1 row entry · 12 columns
Open in standard view 
This table contains Port-related configurable information.
This table is applicable only when the snooping module is 
operating in the enhanced Mode. This table MUST NOT be 
configured when the snooping module is operating in the 
default mode.
fsSnoopEnhPortEntry entry .1.3.6.1.4.1.2076.105.5.2.1
This table contains the list of parameters/attributes objects that
can be configured on an interface.
Indexes
fsSnoopEnhPortIndex fsSnoopEnhPortInnerVlanId fsSnoopEnhPortInetAddressType
Column Syntax OID
fsSnoopEnhPortIndex
The interface index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.105.5.2.1.1
fsSnoopEnhPortInnerVlanId
The Inner VLAN Identifier.
InnerVlanIndex
Textual Convention: InnerVlanIndex Unsigned32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2076.105.5.2.1.2
fsSnoopEnhPortInetAddressType
Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.5.2.1.3
fsSnoopEnhPortLeaveMode
Sets the mechanism to be used for processing the leave messages
in the down stream interface.

When this object is set to 'explicitHostTrack', then the leave
messages are processed using the explicit hos…
Enumerationr/w
Enumerated Values:
1explicithosttrack
2fastleave
3normalleave
 .1.3.6.1.4.1.2076.105.5.2.1.4
fsSnoopEnhPortRateLimit
Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsigned integer and will not rate limit any…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.2.1.5
fsSnoopEnhPortMaxLimitType
Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
'groups' indicates that the limit is set…
Enumerationr/w
Enumerated Values:
0none
1groups
2channels
 .1.3.6.1.4.1.2076.105.5.2.1.6
fsSnoopEnhPortMaxLimit
Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The fsSnoopEnhPortMaxLimitType must be set before configuring
this object. However the Max-limi…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.2.1.7
fsSnoopEnhPortProfileId
The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received
through this downstream interface. By …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.2.1.8
fsSnoopEnhPortMemberCnt
Provides the total number of groups or channels active on the
interface at the given time.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.2.1.9
fsSnoopEnhPortMaxBandwidthLimit
Sets the Maximum bandwidth allowed on this port for Multicast.
The fsSnoopEnhPortMaxLimitType must be set before configuring
this object. If the fsSnoopEnhPortMaxLimitType is 'channels',
this limit applies to the band…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.105.5.2.1.10
fsSnoopEnhPortDropReports
This object decides whether to process or drop the
IGMP reports coming on this port.
Enumerationr/w
Enumerated Values:
1allow
2drop
 .1.3.6.1.4.1.2076.105.5.2.1.11
fsSnoopEnhPortRowStatus
The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.105.5.2.1.12

fsSnoopRtrPortTable

table
.1.3.6.1.4.1.2076.105.5.3 · 1 row entry · 7 columns
Open in standard view 
This table contains upstream Router Port-related
configurable information. Router port entry in this table 
will be created when the router port is either learnt 
dynamically or when the router port is statically 
configured through 'fsSnoopVlanRtrPortList'.Only static
router ports will be restored during save restore.
fsSnoopRtrPortEntry entry .1.3.6.1.4.1.2076.105.5.3.1
This table contains the upstream router port operating
and configured version of IGMP.
Indexes
fsSnoopRtrPortIndex fsSnoopRtrPortVlanId fsSnoopRtrPortInetAddressType
Column Syntax OID
fsSnoopRtrPortIndex
The interface index of the port which is defined
as an upstream router port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2076.105.5.3.1.1
fsSnoopRtrPortVlanId
The VLAN Identifier for the upstream router port
Q-BRIDGE-MIBVlanIndex
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
 .1.3.6.1.4.1.2076.105.5.3.1.2
fsSnoopRtrPortInetAddressType
Inet Address Type corresponding to the global configuration
entry. This indicates whether the row is for IGMP/MLD Snooping
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2076.105.5.3.1.3
fsSnoopRtrPortOperVersion
Indicates the operating version of the IGMP Proxy
on the upstream router port. Operating version is used by the
Proxy to send consolidated reports on the router ports.
Operating version of the router port will change b…
Enumeration
Enumerated Values:
1v1
2v2
3v3
 .1.3.6.1.4.1.2076.105.5.3.1.4
fsSnoopRtrPortCfgOperVersion
Indicates the configured version of the IGMP Proxy
on the upstream router port.The default operating mode is
IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2). The
'fsSnoopRtrPortCfgOperVersion' should be configure…
Enumerationr/w
Enumerated Values:
1v1
2v2
3v3
 .1.3.6.1.4.1.2076.105.5.3.1.5
fsSnoopOlderQuerierInterval
The time interval after which proxy assumes that there are no
v1/v2 routers present on the upstream port.While OlderQuerierTimer is
running, proxy will reply to all queries with consolidated
v1/v2 (oper version) repor…
Integer32
Constraints:
range: 60-600
 .1.3.6.1.4.1.2076.105.5.3.1.6
fsSnoopV3QuerierInterval
The time interval after which proxy assumes that there are no
IGMPv3 routers present on the upstream port.While V3QuerierTimer is
running, proxy will reply to all queries with consolidated
v1/v2/v3 (oper version) rep…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2076.105.5.3.1.7

fsXSnoopRtrPortTable

table
.1.3.6.1.4.1.2076.105.5.4 · 1 row entry · 1 columns
Open in standard view 
This augment table contains additional objects
for fsSnoopRtrPortTable.
fsXSnoopRtrPortEntry entry .1.3.6.1.4.1.2076.105.5.4.1
This table contains management information applicable to
an interface.
Indexes
No indexes recorded
Column Syntax OID
fsXSnoopRtrPortRowStatus
The Row status of this entry which
is used only in two scenarios.
1. CREATE_AND_WAIT
2. DESTROY.
Where '1' will be used during port creation
and '2' will be used during port deletion.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2076.105.5.4.1.1

fsSnoopTrapObjectsTable

table
.1.3.6.1.4.1.2076.105.6.5 · 1 row entry · 1 columns
Open in standard view 
This table is used to notify the error occurred, when an NPAPI call  
invoked from the Snooping module fails, in the form of a trap
fsSnoopTrapObjectsEntry entry .1.3.6.1.4.1.2076.105.6.5.1
This entry is used to store the notification information
Indexes
No indexes recorded
Column Syntax OID
fsSnoopTrapHwErrType
Indicates the type of hardware call that failed.
Enumeration
Enumerated Values:
0hardwareCreate
1hardwareDelete
2hardwarePortAdd
3hardwarePortDelete
 .1.3.6.1.4.1.2076.105.6.5.1.1