fsSnoopPortMaxBandwidthLimit
ARICENT-SNOOP-MIB ·
.1.3.6.1.4.1.2076.105.5.1.1.9
Object
Sets the Maximum bandwidth allowed on this port for Multicast. The fsSnoopPortMaxLimitType must be set before configuring this object. If the fsSnoopPortMaxLimitType is 'channels', this limit applies to the bandwidth of channels going through the port. It means that both Source as well as Group will be considered for getting the configured bandwidth of multicast data. If the fsSnoopPortMaxLimitType is 'groups', only Group address will be considered for getting the configured bandwidth of multicast data. Whenever a join comes, the bandwidth corresponding to the joined channel or group, will be reserved on the port. No new joins will be accepted, if the reserved bandwidth gets greater that the configured MaxBandwidth.
Context
- MIB
- ARICENT-SNOOP-MIB
- OID
.1.3.6.1.4.1.2076.105.5.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsSnoopPortEntry
- Table
- fsSnoopPortTable
- Siblings
- 10
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSnoopPortIndex The interface index of the port. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2076.105.5.1.1.1 |
| fsSnoopPortDropReports This object decides whether to process or drop the
IGMP reports coming on this port. | column | Enumeration | .1.3.6.1.4.1.2076.105.5.1.1.10 |
| fsSnoopPortRowStatus The status of a row in the Port Config table. Using this object,
new entries can be created or existing entries can be removed
from the Port Config Table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.105.5.1.1.11 |
| fsSnoopPortInetAddressType Inet Address Type corresponding to this interface configuration
entry. This indicates whether the row is for IGMP/MLD Snooping | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2076.105.5.1.1.2 |
| fsSnoopPortLeaveMode Sets the mechanism to be used for processing the leave messages
in the down stream interface.
When this object is set to 'explicitHostTrack', then the leave
messa… | column | Enumeration | .1.3.6.1.4.1.2076.105.5.1.1.3 |
| fsSnoopPortRateLimit Configures the rate-limit for a downstream interface in
units of the number of IGMP packets per second. By default,
this object will hold the maximum value supported by an
unsi… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.105.5.1.1.4 |
| fsSnoopPortMaxLimitType Indicates the type of limit to be applied on this interface.
Setting as 'channels' indicates that the limit is set for
channel (group, source) registrations whereas setting as
… | column | Enumeration | .1.3.6.1.4.1.2076.105.5.1.1.5 |
| fsSnoopPortMaxLimit Configures the maximum number of unique entries (channel or
group) that can be learned simultaneously on this interface.
The fsSnoopPortMaxLimitType must be set before configuri… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.105.5.1.1.6 |
| fsSnoopPortProfileId The multicast profile index configured for the downstream
interface. This profile contains a set of allowed or denied
rules which are to be applied for the IGMP packets received… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.105.5.1.1.7 |
| fsSnoopPortMemberCnt Provides the total number of groups or channels active on the
interface at the given time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2076.105.5.1.1.8 |