fsSnoopVlanOperatingVersion
ARICENT-SNOOP-MIB ·
.1.3.6.1.4.1.2076.105.3.4.1.5
Object
column
deprecated
Enumeration
Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2). This object is deprecated. Its functionality is met by fsSnoopRtrPortOperVersion object.
Context
- MIB
- ARICENT-SNOOP-MIB
- OID
.1.3.6.1.4.1.2076.105.3.4.1.5- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- fsSnoopVlanFilterEntry
- Table
- fsSnoopVlanFilterTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | v1 |
2 | v2 |
3 | v3 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSnoopVlanFilterInstId Instance ID pertaining to VLAN filter table entry. | column | Integer32 | .1.3.6.1.4.1.2076.105.3.4.1.1 |
| fsSnoopVlanQueryInterval This is the interval (in seconds) for which the switch
sends general queries in proxy and proxy-reporting mode.
In proxy-reporting mode, General queries will be sent
on all downs… | column | Integer32 | .1.3.6.1.4.1.2076.105.3.4.1.10 |
| fsSnoopVlanRtrPortList List of ports which are configured statically as router ports.
statically. This object may not be sufficient to represent the
full set of interfaces in each switch instance in env… | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.2076.105.3.4.1.11 |
| fsSnoopVlanRowStatus The status of a row in the VLAN filter table. Using this
object, new entries can be created in the VLAN filter table
and the existing entries can be removed from the
VLAN filte… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2076.105.3.4.1.12 |
| fsSnoopVlanStartupQueryCount The Startup Query Count is the number of Queries sent out on
startup, separated by the Startup Query Interval. | column | Integer32 | .1.3.6.1.4.1.2076.105.3.4.1.13 |
| fsSnoopVlanStartupQueryInterval Interval between the general query messages sent by the switch
during startup of querier election process.
This value is (Query Interval/4) | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.105.3.4.1.14 |
| fsSnoopVlanOtherQuerierPresentInterval The Other Querier Present Interval is the length of time that
must pass before a multicast router decides that there is no
longer another multicast router which should be the qu… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2076.105.3.4.1.15 |
| fsSnoopVlanQuerierIpAddress The IpAddress to be used in Query Message. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.105.3.4.1.16 |
| fsSnoopVlanQuerierIpFlag If the vlan querier IP flag is enabled but querier ip is not configured,
either IP Address of interface vlan or default vlan interface ip address will
be used as source ip address… | column | Enumeration | .1.3.6.1.4.1.2076.105.3.4.1.17 |
| fsSnoopVlanElectedQuerier This object specifies the IpAddress of elected querier. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2076.105.3.4.1.18 |
| fsSnoopVlanRobustnessValue The Robustness Variable allows tuning for the expected packet loss on
a subnet. If a subnet is expected to be lossy, the Robustness variable
may be increased | column | Unsigned32 | .1.3.6.1.4.1.2076.105.3.4.1.19 |
| fsSnoopVlanFilterVlanId VLAN ID for which snooping configuration is to be done. | column | Integer32 | .1.3.6.1.4.1.2076.105.3.4.1.2 |
| fsSnoopVlanFilterInetAddressType Indicates whether the row belongs to IGS/MLD snooping | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2076.105.3.4.1.3 |
| fsSnoopVlanSnoopStatus Enables or disables IGS/MLDS on that specific VLAN | column | Enumeration | .1.3.6.1.4.1.2076.105.3.4.1.4 |
| fsSnoopVlanCfgOperVersion deprecated Indicates the operating version of the IGS/MLDS switch for
a specific VLAN. The default operating mode on a specific VLAN
is IGMP version 3 i.e, V3(3) or MLD version 2 i.e., V2(… | column | Enumeration | .1.3.6.1.4.1.2076.105.3.4.1.6 |
| fsSnoopVlanFastLeave Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message the switch checks
if they are any interested receivers for the group by sending… | column | Enumeration | .1.3.6.1.4.1.2076.105.3.4.1.7 |
| fsSnoopVlanQuerier Indicates whether the switch is configured as a querier in the VLAN | column | Enumeration | .1.3.6.1.4.1.2076.105.3.4.1.8 |
| fsSnoopVlanCfgQuerier The snooping switch can be configured to send IGMP/MLD queries
when IGMP/MLD routers are not present in the VLAN. When set to
'enabled' the switch will generate general query me… | column | Enumeration | .1.3.6.1.4.1.2076.105.3.4.1.9 |