ARICENT-ISS-EXT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
3
Rows
3
Columns
50
issExtRateCtrlTable
table.1.3.6.1.4.1.2076.81.8.1.1
·
1 row entry
·
9 columns
A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch.
An entry appears in this table for each physical and port-channel
interface in the switch.
interface in the switch.
Indexes
issExtRateCtrlIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
issExtRateCtrlIndex
The interface index for which the configuration in this
entry applies. |
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2076.81.8.1.1.1.1 |
||||
|
issExtRateCtrlDLFLimitValue
Allows to configure the limiting value for the maximum number
of dlf packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Destination lookup f… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.2076.81.8.1.1.1.2 |
||||
|
issExtRateCtrlBCASTLimitValue
Allows to configure the limiting value for the maximum number
of broadcast packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Broadcast pac… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.2076.81.8.1.1.1.3 |
||||
|
issExtRateCtrlMCASTLimitValue
Allows to configure the limiting value for the maximum number
of multicast packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for Multicast pac… |
Integer32r/w Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.2076.81.8.1.1.1.4 |
||||
|
issExtRateCtrlPortRateLimit
Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, th… |
Integer32r/w Constraints: range: 0-80000000 |
.1.3.6.1.4.1.2076.81.8.1.1.1.5 |
||||
|
issExtRateCtrlPortBurstSize
Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second) This object's value will take effect on the interface speed. Based on the operating speed of th… |
Integer32r/w Constraints: range: 0-80000000 |
.1.3.6.1.4.1.2076.81.8.1.1.1.6 |
||||
|
issExtDefaultRateCtrlStatus
Allows to configure the per port status of storm control feature.
when value is set as enabled, the packet rates for Broadcast, Multicast and Dlf packets will be set to default values. when disabled, they will be set to… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.1.1.1.7 |
||||
|
issExtRateCtrlPortInputRestoreFilter
Object is used to restore rate limit input config
|
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2076.81.8.1.1.1.8 |
||||
|
issExtRateCtrlPortInputRateLimit
Configures interface Input Rate Limit.
This object configures the input rate limit. The default value for the object is disabled. |
Integer32r/w Constraints: range: 0-1000 |
.1.3.6.1.4.1.2076.81.8.1.1.1.9 |
issExtL2FilterTable
table.1.3.6.1.4.1.2076.81.8.2.1
·
1 row entry
·
17 columns
A table to configure L2 filter rules in the system.
Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number.
Index to the table is the L2 filter number.
Indexes
issExtL2FilterNo
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
issExtL2FilterNo
L2 Filter rule number.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2076.81.8.2.1.1.1 |
||||||||||||
|
issExtL2FilterPriority
The priority of the L2 filter can be used to decide which filter rule
is applicable when --> the packet matches with more than one filter rules --> All the filter rules result in 'allow'ing the packet … |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.2076.81.8.2.1.1.2 |
||||||||||||
|
issExtL2FilterEtherType
The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of this object is '0'. When this object is SET with the default value, frames are not matched for the value in th… |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2076.81.8.2.1.1.3 |
||||||||||||
|
issExtL2FilterProtocolType
Specifies the non IP protocol type to be filtered.
aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-console | mop-dump | msdos | mumps | netbios | vines-echo … |
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.2076.81.8.2.1.1.4 |
||||||||||||
|
issExtL2FilterDstMacAddr
Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Address . |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.2076.81.8.2.1.1.5 |
||||||||||||
|
issExtL2FilterSrcMacAddr
Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero which means dont care condition ie) any Src Mac address |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.2076.81.8.2.1.1.6 |
||||||||||||
|
issExtL2FilterVlanId
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring this value is not allowed. |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.2076.81.8.2.1.1.7 |
||||||||||||
|
issExtL2FilterInPortList
Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list. If the In port list is '0', the filter rule is applicable for the incoming packets on all ports. Even th… |
PortListr/w Textual Convention: PortList OctetString |
.1.3.6.1.4.1.2076.81.8.2.1.1.8 |
||||||||||||
|
issExtL2FilterAction
Specifies the action to be taken on the packet if the filter
rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.2.1.1.9 |
||||||||||||
|
issExtL2FilterMatchCount
Number of times this filter is matched.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2076.81.8.2.1.1.10 |
||||||||||||
|
issExtL2FilterStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2076.81.8.2.1.1.11 |
||||||||||||
|
issExtL2FilterOutPortList
Specifies the complete set of ports over which this filter is applied
for packets egress at Ports in this list. If the Out port list is '0', the filter rule is applicable for the outgoing packets on all ports. Even th… |
PortListr/w Textual Convention: PortList OctetString |
.1.3.6.1.4.1.2076.81.8.2.1.1.12 |
||||||||||||
|
issExtL2FilterDirection
Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction. When the direction of this filter is 'in', It is applied on specified ports of the issExtL2FilterInPortLi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.2.1.1.13 |
||||||||||||
|
issExtL2FilterCfiDeiBit
Specifies the CfiDei bit value in the c-vlan tag or s-vlan tag of
the packet to be applied in the filter. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.2.1.1.14 |
||||||||||||
|
issExtL2FilterDP
Specifies the drop precedence level to be applied in the filter.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.2.1.1.15 |
||||||||||||
|
issExtL2FilterDstMacAddrMask
This object specifies that the mask used to match the Destination MAC address with the packet. By Default, the Destination
Mac Address Mask will be ff:ff:ff:ff:ff:ff which means macth exactly the Dst Mac specified addr… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.2076.81.8.2.1.1.16 |
||||||||||||
|
issExtL2FilterSrcMacAddrMask
This object specifies that the mask used to match the Source MAC address with the packet. By Default, the Source
Mac Address Mask will be ff:ff:ff:ff:ff:ff which means macth exactly the Src Mac specified address |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.2076.81.8.2.1.1.17 |
issExtL3FilterTable
table.1.3.6.1.4.1.2076.81.8.3.1
·
1 row entry
·
24 columns
A table to configure L3 filter rules in the system.
Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number.
Index to the table is L3 filter number.
Indexes
issExtL3FilterNo
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
issExtL3FilterNo
L3 Filter rule number.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.2076.81.8.3.1.1.1 |
||||||||||||
|
issExtL3FilterPriority
The priority of the filter can be used to decide which filter rule
is applicable when --> the packet matches with more than one filter rules --> All the filter rules result in 'allow'ing the packet Higher value o… |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.2076.81.8.3.1.1.2 |
||||||||||||
|
issExtL3FilterProtocol
The type of protocol to be checked against the packet. The
default value is 255. If the value is 255, it means that the protocol type can be anything and it will not be checked to decide the action. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2076.81.8.3.1.1.3 |
||||||||||||
|
issExtL3FilterMessageType
The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be dropped / allowed based on the action set in issExtL3FilterAction. The default value is 255. It mea… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2076.81.8.3.1.1.4 |
||||||||||||
|
issExtL3FilterMessageCode
The message code to be checked against the packet. If the
packet matches with the message code, then the packet will be dropped / allowed based on the action set in issExtL3FilterAction. The default value is 255. It mea… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2076.81.8.3.1.1.5 |
||||||||||||
|
issExtL3FilterDstIpAddr
Destination IP address to be matched with the packet.
This object is valid only if the 'issExtFilterType' is 'l3filter'. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2076.81.8.3.1.1.6 |
||||||||||||
|
issExtL3FilterSrcIpAddr
Source IP address to be matched with the packet.
This object is valid only if the 'issExtFilterType' is 'l3filter'. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2076.81.8.3.1.1.7 |
||||||||||||
|
issExtL3FilterDstIpAddrMask
The IP subnet mask for Destination IP address.
This object is valid only if the 'issExtFilterType' is 'l3filter'. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2076.81.8.3.1.1.8 |
||||||||||||
|
issExtL3FilterSrcIpAddrMask
The IP subnet mask for Source IP address.
This object is valid only if the 'issExtFilterType' is 'l3filter'. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2076.81.8.3.1.1.9 |
||||||||||||
|
issExtL3FilterMinDstProtPort
The minimum port in the destination port range. Please note
these ports are the TCP / UDP ports. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2076.81.8.3.1.1.10 |
||||||||||||
|
issExtL3FilterMaxDstProtPort
The maximum port in the destination port range. Please note
these ports are the TCP / UDP ports. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2076.81.8.3.1.1.11 |
||||||||||||
|
issExtL3FilterMinSrcProtPort
The minimum port in the source port range. Please note
these ports are the TCP / UDP ports. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2076.81.8.3.1.1.12 |
||||||||||||
|
issExtL3FilterMaxSrcProtPort
The maximum port in the source port range. Please note
these ports are the TCP / UDP ports. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2076.81.8.3.1.1.13 |
||||||||||||
|
issExtL3FilterInPortList
Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable. If the incoming port list is '0', the filter rule is applicable for all the incoming ports. By default inport li… |
PortListr/w Textual Convention: PortList OctetString |
.1.3.6.1.4.1.2076.81.8.3.1.1.14 |
||||||||||||
|
issExtL3FilterOutPortList
Specifies the complete set of ports over which if the packet goes out,
this filter rule will be applicable. If the outgoing port list is '0', the filter rule is applicable for all the outgoing packets in all ports. By… |
PortListr/w Textual Convention: PortList OctetString |
.1.3.6.1.4.1.2076.81.8.3.1.1.15 |
||||||||||||
|
issExtL3FilterAckBit
The TCP ACK bit to be checked against the packet. The default
value is 'any'(3). It means that ACK bit will not be checked to decide the action. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.3.1.1.16 |
||||||||||||
|
issExtL3FilterRstBit
The TCP RST bit to be checked against the packet. The default
value is 'any'(3). It means that RST bit will not be checked to decide the action. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.3.1.1.17 |
||||||||||||
|
issExtL3FilterTos
The IP TOS bit to be checked against the packet. This is a
single byte integer of which the last three bits (least significant bits) indicate Delay, Throughput and Reliability i.e 'uuuuudtr', u-unused, d-delay, t-thr… |
Integer32r/w Constraints: range: 0-8 |
.1.3.6.1.4.1.2076.81.8.3.1.1.18 |
||||||||||||
|
issExtL3FilterDscp
The IP Dscp value to be checked against the packet.
A value of '-1' means, the Dscp Field becomes dont care. |
Integer32r/w Constraints: range: -1-63 |
.1.3.6.1.4.1.2076.81.8.3.1.1.19 |
||||||||||||
|
issExtL3FilterDirection
Specifies the direction of this filter to be applied. By Default the
filter will be applied on ingress direction. When the direction of this filter is 'in', It is applied on specified ports of the issExtL3FilterInPortLi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.3.1.1.20 |
||||||||||||
|
issExtL3FilterAction
Specifies the action to be taken on the packet if the filter
rule matches. If the action is 'allow', the packet will be sent to the ports in 'out port list'. If the out port list is '0', the port over which the packet … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.3.1.1.21 |
||||||||||||
|
issExtL3FilterMatchCount
Number of times this filter is matched.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2076.81.8.3.1.1.22 |
||||||||||||
|
issExtL3FilterStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2076.81.8.3.1.1.23 |
||||||||||||
|
issExtL3FilterSynBit
The TCP SYN bit to be checked against the packet. The default
value is 'any'(3). It means that SYN bit will not be checked to decide the action. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.2076.81.8.3.1.1.24 |