issExtL2FilterOutPortList

ARICENT-ISS-EXT-MIB · .1.3.6.1.4.1.2076.81.8.2.1.1.12

MIB view Table view

Object

column r/w PortList

Specifies the complete set of ports over which this filter is applied
for packets egress at Ports in this list.
If the Out port list is '0', the filter rule is applicable for  the 
outgoing packets on all ports.
Even though the issExtL2FilterOutPortList is configured, It is applicable only
if issExtL2FilterDirection is configured as 'out'.
By default outport list is maintained as '0'.

Context

MIB: ARICENT-ISS-EXT-MIB
OID: .1.3.6.1.4.1.2076.81.8.2.1.1.12
Type: column
Access: readwrite
Status: current
Parent: issExtL2FilterEntry
Table: issExtL2FilterTable
Siblings: 16

Syntax

PortList

Source: PortList
Base type: OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
issExtL2FilterNo L2 Filter rule number.	column	Integer32	`.1.3.6.1.4.1.2076.81.8.2.1.1.1`
issExtL2FilterMatchCount Number of times this filter is matched.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.2076.81.8.2.1.1.10`
issExtL2FilterStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of th…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2076.81.8.2.1.1.11`
issExtL2FilterDirection Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It is applied on speci…	column	Enumeration	`.1.3.6.1.4.1.2076.81.8.2.1.1.13`
issExtL2FilterCfiDeiBit Specifies the CfiDei bit value in the c-vlan tag or s-vlan tag of the packet to be applied in the filter.	column	Enumeration	`.1.3.6.1.4.1.2076.81.8.2.1.1.14`
issExtL2FilterDP Specifies the drop precedence level to be applied in the filter.	column	Enumeration	`.1.3.6.1.4.1.2076.81.8.2.1.1.15`
issExtL2FilterDstMacAddrMask This object specifies that the mask used to match the Destination MAC address with the packet. By Default, the Destination Mac Address Mask will be ff:ff:ff:ff:ff:ff which means …	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.2076.81.8.2.1.1.16`
issExtL2FilterSrcMacAddrMask This object specifies that the mask used to match the Source MAC address with the packet. By Default, the Source Mac Address Mask will be ff:ff:ff:ff:ff:ff which means macth exac…	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.2076.81.8.2.1.1.17`
issExtL2FilterPriority The priority of the L2 filter can be used to decide which filter rule is applicable when --> the packet matches with more than one filter rules --> All the filter rules res…	column	Integer32	`.1.3.6.1.4.1.2076.81.8.2.1.1.2`
issExtL2FilterEtherType The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with the default value, fr…	column	Integer32	`.1.3.6.1.4.1.2076.81.8.2.1.1.3`
issExtL2FilterProtocolType Specifies the non IP protocol type to be filtered. aarp \| amber \| dec-spanning \| decnet-iv \| diagnostic \| dsm \|etype-6000 \| etype-8042 \| lat \| lavc-sca \| mop-console \| mop-dump …	column	Unsigned32	`.1.3.6.1.4.1.2076.81.8.2.1.1.4`
issExtL2FilterDstMacAddr Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Address .	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.2076.81.8.2.1.1.5`
issExtL2FilterSrcMacAddr Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.2076.81.8.2.1.1.6`
issExtL2FilterVlanId Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring this value is not …	column	Integer32	`.1.3.6.1.4.1.2076.81.8.2.1.1.7`
issExtL2FilterInPortList Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is applicable for the…	column	PortList	`.1.3.6.1.4.1.2076.81.8.2.1.1.8`
issExtL2FilterAction Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action …	column	Enumeration	`.1.3.6.1.4.1.2076.81.8.2.1.1.9`