issExtRateCtrlPortRateLimit
ARICENT-ISS-EXT-MIB ·
.1.3.6.1.4.1.2076.81.8.1.1.1.5
Object
column
r/w
Integer32
Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate limiting i.e. sets the port to full speed.
Context
- MIB
- ARICENT-ISS-EXT-MIB
- OID
.1.3.6.1.4.1.2076.81.8.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- issExtRateCtrlEntry
- Table
- issExtRateCtrlTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-80000000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| issExtRateCtrlIndex The interface index for which the configuration in this
entry applies. | column | Integer32 | .1.3.6.1.4.1.2076.81.8.1.1.1.1 |
| issExtRateCtrlDLFLimitValue Allows to configure the limiting value for the maximum number
of dlf packets that can be transmitted per second over this interface.
Setting this object to the value zero disables… | column | Integer32 | .1.3.6.1.4.1.2076.81.8.1.1.1.2 |
| issExtRateCtrlBCASTLimitValue Allows to configure the limiting value for the maximum number
of broadcast packets that can be transmitted per second over this
interface. Setting this object to the value zero d… | column | Integer32 | .1.3.6.1.4.1.2076.81.8.1.1.1.3 |
| issExtRateCtrlMCASTLimitValue Allows to configure the limiting value for the maximum number
of multicast packets that can be transmitted per second over this
interface. Setting this object to the value zero d… | column | Integer32 | .1.3.6.1.4.1.2076.81.8.1.1.1.4 |
| issExtRateCtrlPortBurstSize Configures interface Burst Pkt Rate. (Packet Burst that can be
transferred on a port at a particular second)
This object's value will take effect on the interface s… | column | Integer32 | .1.3.6.1.4.1.2076.81.8.1.1.1.6 |
| issExtDefaultRateCtrlStatus Allows to configure the per port status of storm control feature.
when value is set as enabled, the packet rates for Broadcast,
Multicast and Dlf packets will be set to default va… | column | Enumeration | .1.3.6.1.4.1.2076.81.8.1.1.1.7 |
| issExtRateCtrlPortInputRestoreFilter Object is used to restore rate limit input config | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2076.81.8.1.1.1.8 |
| issExtRateCtrlPortInputRateLimit Configures interface Input Rate Limit.
This object configures the input rate limit. The default value for the object is disabled. | column | Integer32 | .1.3.6.1.4.1.2076.81.8.1.1.1.9 |