ALCATEL-IND1-PORT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
15
Rows
15
Columns
214
esmConfTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1
·
1 row entry
·
42 columns
A list of ESM Physical Port instances.
A ESM Physical Port entry.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
esmPortSlot
The physical Slot number for this Ethernet Port.
Slot number has been added to be used by the private Trap. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.1 |
||||||||||||||
|
esmPortIF
The on-board interface number for this Ethernet Port.
Port Number has been added to be used by the private Trap. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.2 |
||||||||||||||
|
esmPortAutoSpeed
The automatically detected port line speed
of this ESM port. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.3 |
||||||||||||||
|
esmPortAutoDuplexMode
The automatically detected port duplex mode
of this ESM port. Note: GigaEthernet supports only Full duplex mode. Default value for 10/100 = Half duplex mode. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.4 |
||||||||||||||
|
esmPortCfgSpeed
The configured port line speed of this ESM port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.5 |
||||||||||||||
|
esmPortCfgDuplexMode
The configured port duplex mode of this ESM port.
Note: GigaEthernet support only full-duplex. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.6 |
||||||||||||||
|
esmPortCfgIFG
Contains the setting of Inter-Frame Gap (IFG), in bytes
for receive and transmit. The range is from 9 to 12 bytes. Note: The default value changed according to the Port type Default Bandwidth val… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.7 |
||||||||||||||
|
esmPortPauseSlotTime
Indicates the number of microseconds the other
end-station waits after the reception of a pause frame. Note: Pause Flow control is not available for 10Mbps. For 100Mbps, the possible value range i… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.8 |
||||||||||||||
|
esmPortMaxFloodRate
Broadcast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also.
The default value for flood rate is: 1. 4 mbps if the port speed is 10 mbps, 2. 49 mbps if the port speed is 100 mbps … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.9 |
||||||||||||||
|
esmPortFloodMcastEnable
Enable/disable the maximum flood rate
for multicast. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.10 |
||||||||||||||
|
esmPortCfgMaxFrameSize
Configure the value of the maximum frame
size allow. For 10/100: It is a range between 1518(untagged) and 1553 bytes. For GigaEthernet: It is a range between 1518 and 10240 bytes.(OS7700,OS7800,OS8800) It is a range… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.11 |
||||||||||||||
|
esmPortCfgLongEnable
Allow the user to change the maximun Frame size.
Note: It is not configurable for 10/100 Ethernet port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.12 |
||||||||||||||
|
esmPortCfgRuntEnable
Allow the user to change the minimum Frame size.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.13 |
||||||||||||||
|
esmPortCfgRuntSize
Configure the value of the minimum frame
size allow per ports. The range is 0 to 64. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.14 |
||||||||||||||
|
esmPortCfgAutoNegotiation
Allow the user to enable or disable the port auto negotiation.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.15 |
||||||||||||||
|
esmPortCfgCrossover
Allow the user to configure port crossover.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.16 |
||||||||||||||
|
esmPortCfgFlow
Use the dot3PauseAdminMode from the standard MIB to configure the flow control.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.17 |
||||||||||||||
|
esmPortCfgHybridActiveType
This object is only applicable to hybrid ports .
It indicates configured active media type.(the operational media type may be different if esmPortCfgHybridMode is configured to be preferredFiber or preferredCopper) For … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.18 |
||||||||||||||
|
esmPortCfgHybridMode
This object is only applicable to hybrid ports.
This allows the user the user to configure the media type with which the port should come up. The user can configure the port to come as copper only or fiber only or ei… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.19 |
||||||||||||||
|
esmPortOperationalHybridType
This object is only applicable to hybrid ports .
It indicates the actual media type that has link up and is or will be passing traffic. If link is not present the object will return none(0) value. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.20 |
||||||||||||||
|
esmPortCfgMMULowWaterMarkCellSetLimit
Per-port-per-CoS Head of Line blocking cell limits. Range is 0 - 16383
Firebolt register Offset: 0x006pp30 - 0x37 Bits: 13:0 CellSetLimit , Default: 0x0100 This setting allocates the guaranteed cells for one port's CoSx… |
Integer32r/w Constraints: range: 0-16383 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.21 |
||||||||||||||
|
esmPortCfgMMUDynamicCellSetLimit
Per-egress port cell-based dynamic (shared buffer pool) memory
usage drop and resume thresholds. This sets the limit for which the eight CoS-Qs within a port may share once the LWMCOSCELL limit is exceeded. Range is 0 -… |
Integer32r/w Constraints: range: 0-16383 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.22 |
||||||||||||||
|
esmPortViolationBitMap
A bit map that identifies the set of Application that have blocked
a port as a result of a particular violation |
Bits Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.23 |
||||||||||||||
|
esmPortViolationClearAll
Clear all port vioaltion
|
Integer32r/w Constraints: range: 0-0 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.24 |
||||||||||||||
|
esmPortFloodBcastEnable
Enable/disable the maximum flood rate
for Broadcast. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.25 |
||||||||||||||
|
esmPortFloodUnknownUcastEnable
Enable/disable the maximum flood rate
for unknown unicast. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.26 |
||||||||||||||
|
esmPortMaxUnknownUcastFloodRate
Unknown-Unicast flood threshold type. To set the type, set esmPortMaxUnknownUcastFloodRateLimit also.
The default value for flood rate is: 1. 4 mbps if the port speed is 10 mbps, 2. 49 mbps if the port speed… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.27 |
||||||||||||||
|
esmPortMaxMcastFloodRate
Multicast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also.
The default value for flood rate is: 1. 4 mbps if the port speed is 10 mbps, 2. 49 mbps if the port speed is 100 mbps 3. 496 mbps if… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.28 |
||||||||||||||
|
esmPortMaxFloodRateLimit
The value of the maximum broadcast flood limit.
The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G speed) PPS: 244 - 244262 (1G speed) To set the … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.29 |
||||||||||||||
|
esmPortMaxUnknownUcastFloodRateLimit
The value of the maximum unknown-unicast flood limit
The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G speed) PPS: 244 - 244262 (1G speed) To set… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.30 |
||||||||||||||
|
esmPortMaxMcastFloodRateLimit
The value of the maximum multicast flood limit
The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G speed) PPS: 244 - 244262 (1G speed) To set the l… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.31 |
||||||||||||||
|
esmPortCfgSFPType
This object is only applicable to fiber ports.
The string indicates the type of SFP/GBIC of active media. |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.32 |
||||||||||||||
|
esmPortWaitToRestoreTimer
Indicates the number of seconds after which the link up
event is notified to other applications. The timer is started whenever a Link Up is detected on a port being monitored. |
Integer32r/w Constraints: range: 0-300 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.33 |
||||||||||||||
|
esmPortMinFloodRateLimit
The value of the minimum broadcast flood limit
this value should be same type as that of the maximum value configured for broadcast traffic. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.34 |
||||||||||||||
|
esmPortMinMcastFloodRateLimit
The value of the minimum multicast flood limit
this value should be same type as that of the maximum value configured for multicast traffic. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.35 |
||||||||||||||
|
esmPortFloodThresholdAction
The action to be taken when the broadcast
traffic exceeding the maximum configured value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.36 |
||||||||||||||
|
esmPortMcastThresholdAction
The action to be taken when the multicast
traffic exceeding the maximum configured value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.37 |
||||||||||||||
|
esmPortFlood
The state of the port, is it having normal or stormed broad
cast traffic. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.38 |
||||||||||||||
|
esmPortMCastStorm
The state of the port, is it having normal or stormed
mulit cast traffic. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.39 |
||||||||||||||
|
esmPortCfgEeeStatus
Allow the user to enable or disable the port EEE mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.40 |
||||||||||||||
|
esmPortCfgEeeAutoNegState
Current autoneg state of EEE enabled port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.41 |
||||||||||||||
|
esmPortCfgEeeCapability
Current cpapbility of EEE enabled port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.42 |
alcetherStatsTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2
·
1 row entry
·
45 columns
A list of Ethernet statistics entries.
A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named alcetherStatsPkts.1
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named alcetherStatsPkts.1
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
alcetherClearStats
Used to Clear all Statistics counters.
By default, this object contains zero value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.1 |
||||
|
alcetherLastClearStats
The value of SysUpTime at the time of all
the statistics counters are cleared. By default, this object contains a zero value. |
SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.2 |
||||
|
alcetherStatsCRCAlignErrors
The total number of packets received that
had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral nu… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.3 |
||||
|
alcetherStatsRxUndersizePkts
The total number of packets received that were
less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.4 |
||||
|
alcetherStatsTxUndersizePkts
The total number of packets transmitted that were
less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.5 |
||||
|
alcetherStatsTxOversizePkts
The total number of packets transmitted that were
longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.6 |
||||
|
alcetherStatsRxJabbers
The total number of packets received that were
longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.7 |
||||
|
alcetherStatsRxCollisions
The best estimate of the total number of collisions
on this Ethernet segment (in reception). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.1.… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.8 |
||||
|
alcetherStatsTxCollisions
The best estimate of the total number of collisions
on this Ethernet segment (in transmition). Only for Ethernet Interfaces. The value returned will depend on the location of the RMON probe. Section 8.2.… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.9 |
||||
|
alcetherStatsPkts64Octets
The total number of packets (including bad
packets) received that were 64 octets in length (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.10 |
||||
|
alcetherStatsPkts65to127Octets
The total number of packets (including bad
packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.11 |
||||
|
alcetherStatsPkts128to255Octets
The total number of packets (including bad
packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.12 |
||||
|
alcetherStatsPkts256to511Octets
The total number of packets (including bad
packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.13 |
||||
|
alcetherStatsPkts512to1023Octets
The total number of packets (including bad
packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.14 |
||||
|
alcetherStatsPkts1024to1518Octets
The total number of packets (including bad
packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). For both Ethernet and GigaEthernet. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.15 |
||||
|
gigaEtherStatsPkts1519to4095Octets
The total number of packets (including bad
packets) received that were between 1519 and 4095 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.16 |
||||
|
gigaEtherStatsPkts4096to9215Octets
The total number of packets (including bad
packets) received that were between 4096 and 9215 octets in length inclusive (excluding framing bits but including FCS octets). Only for GigaEthernet interfaces |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.17 |
||||
|
alcetherStatsPkts1519to2047Octets
The total number of frames(including error packets) received
that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.18 |
||||
|
alcetherStatsPkts2048to4095Octets
The total number of frames(including error packets) received
that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.19 |
||||
|
alcetherStatsPkts4096Octets
The total number of frames(including error packets) received
that were greater than or equal to 4096 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.20 |
||||
|
alcetherStatsRxGiantPkts
The total number of frames that are greater than the specified
Max length value, with a valid CRC, dropped because too long. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.21 |
||||
|
alcetherStatsRxDribbleNibblePkts
The total number of frames for which a dribble nibble has been
received and CRC is correct. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.22 |
||||
|
alcetherStatsRxLongEventPkts
The total number of frames for which the Carrier sense exceeds
50000 bit times for 10 Mbits/sec or 80000 bit times for 100 Mbits/sec. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.23 |
||||
|
alcetherStatsRxVlanTagPkts
The total number of frames for which Type/Length field
contains the VLAN protocol identifier (0x8100). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.24 |
||||
|
alcetherStatsRxControlPkts
The total number of frames that were recognized as control frames.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.25 |
||||
|
alcetherStatsRxLenChkErrPkts
The total number of frames for which the frame length field value
in the Type/Length field does not match the actual data bytes length and is NOT a type field. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.26 |
||||
|
alcetherStatsRxCodeErrPkts
The total number of frames for which one or more nibbles were
signaled as errors during reception of the frame. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.27 |
||||
|
alcetherStatsRxDvEventPkts
The total number of frames for which a RX_DV event (packet not
too long enough to be valid packet) has been seen before the correct frame. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.28 |
||||
|
alcetherStatsRxPrevPktDropped
The total number of frames for which a packet has been dropped
(because of too small IFG) before the correct frame. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.29 |
||||
|
alcetherStatsTx64Octets
The total number of transmitted frames of 64 bytes.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.30 |
||||
|
alcetherStatsTx65to127Octets
The total number of transmitted frames that were between
65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.31 |
||||
|
alcetherStatsTx128to255Octets
The total number of transmitted frames that were between
128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.32 |
||||
|
alcetherStatsTx256to511Octets
The total number of transmitted frames that were between
256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.33 |
||||
|
alcetherStatsTx512to1023Octets
The total number of transmitted frames that were between
512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.34 |
||||
|
alcetherStatsTx1024to1518Octets
The total number of transmitted frames that were between
1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.35 |
||||
|
alcetherStatsTx1519to2047Octets
The total number of transmitted frames that were between
1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.36 |
||||
|
alcetherStatsTx2048to4095Octets
The total number of transmitted frames that were between
2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.37 |
||||
|
alcetherStatsTx4096Octets
The total number of transmitted frames that were greater than
or equal to 4096 bytes in length and less than Max frame length (excluding framing bits but including FCS bytes). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.38 |
||||
|
alcetherStatsTxRetryCount
The total number of collisions that the frames faced during
transmission attempts. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.39 |
||||
|
alcetherStatsTxVlanTagPkts
The total number of transmitted frames for which Type/Length field contains the
VLAN protocol identifier (0x8100). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.40 |
||||
|
alcetherStatsTxControlPkts
The total number of transmitted frames that were recognised as control frames.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.41 |
||||
|
alcetherStatsTxLatePkts
The total number of late collisions that occured beyond the collision window.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.42 |
||||
|
alcetherStatsTxTotalBytesOnWire
The total number of bytes transmitted on wire, including all bytes from collided
attempts. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.43 |
||||
|
alcetherStatsTxLenChkErrPkts
The total number of transmitted frames for which the frame length field value
in the Type/Length field does not match the actual data bytes length and is NOT a Type field. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.44 |
||||
|
alcetherStatsTxExcDeferPkts
The total number of frames that were deferred in excess of 6071 nibble-times
in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This stat is only in case of Half duplex and excessive defer bit reset… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.45 |
esmHybridConfTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3
·
1 row entry
·
7 columns
A list of inactive hybrid port instances.
A ESM Physical Port entry.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
esmHybridPortCfgSpeed
The configured port line speed of this ESM port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.1 |
||||||||||||||
|
esmHybridPortCfgDuplexMode
The configured port duplex mode of this ESM port.
Note: GigaEthernet support only full-duplex. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.2 |
||||||||||||||
|
esmHybridPortCfgAutoNegotiation
Allow the user to enable or disable the port auto negotiation.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.3 |
||||||||||||||
|
esmHybridPortCfgCrossover
Allow the user to configure port crossover.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.4 |
||||||||||||||
|
esmHybridPortCfgFlow
This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode
object in dot3PauseTable. It is used to configure pause for fiber media. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.5 |
||||||||||||||
|
esmHybridPortCfgInactiveType
This object is only applicable to hybrid ports .
It indicates the configured inactive media type. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.6 |
||||||||||||||
|
esmHybridPortCfgSFPType
This object is only applicable to fiber ports.
The string indicates the type of SFP/GBIC of active media. |
OctetString Constraints: range: 0-64 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.7 |
alcether10GigTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4
·
1 row entry
·
1 columns
A list of 10 Gig specifics entries.
This table will be populated with the 10 gig only entries.
The management interface can use it to specify if A or B is the primary.
The management interface can use it to specify if A or B is the primary.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
alcether10GigPrimary
Setting the object to 1 will make phy A as primary, 2- phy B as pirmary.
Value 3 should not be set. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4.1.1 |
ddmInfoTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5
·
1 row entry
·
25 columns
The ddmInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex. Each row in this table is dynamically added and removed internally by the system based on the presence or absence of DDM capable SFP/XFP components.
Each row represents a particular SFP/XFP that supports Digital
Diagnostic Monitoring.
Entries are created and deleted internally by the system.
Diagnostic Monitoring.
Entries are created and deleted internally by the system.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
ddmTemperature
The value of ddmTemperature indicates the current temperature
of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not applicable. |
thousandth of a degree celciusInteger32 Constraints: range: -150000-150000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.1 |
|
ddmTempLowWarning
The value of ddmTempLowWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a degree celciusInteger32 Constraints: range: -150000-150000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.2 |
|
ddmTempLowAlarm
The value of ddmTempLowAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a degree celciusInteger32 Constraints: range: -150000-150000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.3 |
|
ddmTempHiWarning
The value of ddmTempHiWarning indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a degree celciusInteger32 Constraints: range: -200000--200000range: -150000-150000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.4 |
|
ddmTempHiAlarm
The value of ddmTempHiAlarm indicates the temperature
of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a degree celciusInteger32 Constraints: range: -150000-150000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.5 |
|
ddmSupplyVoltage
The value of ddmSupplyVoltage indicates the current supply
voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applicable. |
thousandth of a voltInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.6 |
|
ddmSupplyVoltageLowWarning
The value of ddmSupplyVoltageLowWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a voltInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.7 |
|
ddmSupplyVoltageLowAlarm
The value of ddmSupplyVoltageLowAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a voltInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.8 |
|
ddmSupplyVoltageHiWarning
The value of ddmSupplyVoltageHiWarning indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a voltInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.9 |
|
ddmSupplyVoltageHiAlarm
The value of ddmSupplyVoltageHiAlarm indicates the supply
voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a voltInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.10 |
|
ddmTxBiasCurrent
The value of ddmTxBiasCurrent indicates the current Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this object is not applicable. |
thousandth of a milli-AmpereInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.11 |
|
ddmTxBiasCurrentLowWarning
The value of ddmTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a milli-AmpereInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.12 |
|
ddmTxBiasCurrentLowAlarm
The value of ddmTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a milli-AmpereInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.13 |
|
ddmTxBiasCurrentHiWarning
The value of ddmTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a milli-AmpereInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.14 |
|
ddmTxBiasCurrentHiAlarm
The value of ddmTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a milli-AmpereInteger32 Constraints: range: 0-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.15 |
|
ddmTxOutputPower
The value of ddmTxOutputPower indicates the current Output
Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.16 |
|
ddmTxOutputPowerLowWarning
The value of ddmTxOutputPowerLowWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -200000--200000range: -40000-10000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.17 |
|
ddmTxOutputPowerLowAlarm
The value of ddmTxOutputPowerLowAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.18 |
|
ddmTxOutputPowerHiWarning
The value of ddmTxOutputPowerHiWarning indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.19 |
|
ddmTxOutputPowerHiAlarm
The value of ddmTxOutputPowerHiAlarm indicates the Output Power
of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.20 |
|
ddmRxOpticalPower
The value of ddmRxOpticalPower indicates the current Received
Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -200000--200000range: -40000-10000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.21 |
|
ddmRxOpticalPowerLowWarning
The value of ddmRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.22 |
|
ddmRxOpticalPowerLowAlarm
The value of ddmRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.23 |
|
ddmRxOpticalPowerHiWarning
The value of ddmRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.24 |
|
ddmRxOpticalPowerHiAlarm
The value of ddmRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this object is not applicable. |
thousandth of a dBmInteger32 Constraints: range: -40000-10000range: -200000--200000 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.25 |
esmPortModeTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6
·
1 row entry
·
3 columns
A list of ESM Physical Port Mode instances.
A ESM Physical Port Mode entry.
Indexes
esmPortModeIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
esmPortModeIndex
Valid ni/port values
|
Integer32 Constraints: range: 1001-8128 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.1 |
||||
|
esmPortRunningMode
Currently configured Etna port 25,26 as 10G uplink user port or stacking port.
Default is uplink 10G port. User can not set the current mode. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.2 |
||||
|
esmPortSavedMode
Next configured Etna port 25,26 as 10G uplink user port or stacking port.
At boot up, it has the same value as current esmPortRunningMode. It takes some time to write to the EEPROM. Have at least more than 7 sec between… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.3 |
esmTdrPortTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7
·
1 row entry
·
32 columns
The table lists the results of cable diagnostics.
An entry corresponding to each port.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
esmTdrPortCableState
State of a cable as returned by the TDR test.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.1 |
||||||||||||||||||||||
|
esmTdrPortValidPairs
The number of pairs in the cable for which the results of this test are valid.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.2 |
||||||||||||||||||||||
|
esmTdrPortPair1State
The state for pair-1 of the cable as returned by the TDR test.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.3 |
||||||||||||||||||||||
|
esmTdrPortPair1Length
The length for pair-1 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.4 |
||||||||||||||||||||||
|
esmTdrPortPair2State
The state for pair-2 of the cable as returned by the TDR test.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.5 |
||||||||||||||||||||||
|
esmTdrPortPair2Length
The length for pair-2 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.6 |
||||||||||||||||||||||
|
esmTdrPortPair3State
The state for pair-3 of the cable as returned by the TDR test.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.7 |
||||||||||||||||||||||
|
esmTdrPortPair3Length
The length for pair-3 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.8 |
||||||||||||||||||||||
|
esmTdrPortPair4State
The state for pair-4 of the cable as returned by the TDR test.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.9 |
||||||||||||||||||||||
|
esmTdrPortPair4Length
The length for pair-4 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.10 |
||||||||||||||||||||||
|
esmTdrPortFuzzLength
The error in the estimated length of the cable (as returned by TDR test).
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.11 |
||||||||||||||||||||||
|
esmTdrPortTest
Object used to start a TDR test or EXTENDED test on the port. When configured as on, it initiates a TDR test on the port. When configured as extendedOn, it initiates a EXTENDED test on the port. A read operation on this…
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.12 |
||||||||||||||||||||||
|
esmTdrClearStats
Used to Clear TDR stats or EXTENDED stats.
By default, this object contains zero value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.13 |
||||||||||||||||||||||
|
esmTdrResult
Used to give the status of API,whether API able to execute TDR test successfully or failed to executethe TDR test.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.14 |
||||||||||||||||||||||
|
esmTdrPortExtSwapTypeChannel1
Determines the channel associated with the MDI pair(cross or not for each two MDI pairs)
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.15 |
||||||||||||||||||||||
|
esmTdrPortExtSwapTypeChannel2
Determines the channel associated with the MDI pair(cross or not for each two MDI pairs)
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.16 |
||||||||||||||||||||||
|
esmTdrPortExtPolaritySwapPair1
Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.17 |
||||||||||||||||||||||
|
esmTdrPortExtPolaritySwapPair2
Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.18 |
||||||||||||||||||||||
|
esmTdrPortExtPolaritySwapPair3
Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.19 |
||||||||||||||||||||||
|
esmTdrPortExtPolaritySwapPair4
Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.20 |
||||||||||||||||||||||
|
esmTdrPortExtSkewPair1
The Skew among the four pairs of cable(delay between pairs, in n-Seconds)
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.21 |
||||||||||||||||||||||
|
esmTdrPortExtSkewPair2
The Skew among the four pairs of cable(delay between pairs, in n-Seconds)
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.22 |
||||||||||||||||||||||
|
esmTdrPortExtSkewPair3
The Skew among the four pairs of cable(delay between pairs, in n-Seconds)
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.23 |
||||||||||||||||||||||
|
esmTdrPortExtSkewPair4
The Skew among the four pairs of cable(delay between pairs, in n-Seconds)
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.24 |
||||||||||||||||||||||
|
esmTdrPortExtAccurateCableLenPair1
The Length of the cable in meters
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.25 |
||||||||||||||||||||||
|
esmTdrPortExtAccurateCableLenPair2
The Length of the cable in meters
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.26 |
||||||||||||||||||||||
|
esmTdrPortExtAccurateCableLenPair3
The Length of the cable in meters
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.27 |
||||||||||||||||||||||
|
esmTdrPortExtAccurateCableLenPair4
The Length of the cable in meters
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.28 |
||||||||||||||||||||||
|
esmTdrPortExtDownshiftStatus
list downshift status of the port
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.29 |
||||||||||||||||||||||
|
esmTdrExtResult
Used to give the status of API,whether API able to execute TDR Extended test successfully or failed to execute the TDR Extended test.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.30 |
||||||||||||||||||||||
|
esmTdrCableLen
The Approximate Length of a normal cable(Non-Faulty)
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.31 |
||||||||||||||||||||||
|
esmTdrPhyType
Lists the Marvell types
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.32 |
alaLinkMonConfigTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8
·
1 row entry
·
4 columns
A list of Link Monitoring Configuration Parameters
A collection of Link Monitoring configurations kept for a particular
Ethernet interface.
Ethernet interface.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
alaLinkMonStatus
Allows the user to enable or disable Link Monitoring on the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.1 |
||||
|
alaLinkMonTimeWindow
Indicates the number of seconds the Link will be monitored for a port.
|
Integer32r/w Constraints: range: 0-3600 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.2 |
||||
|
alaLinkMonLinkFlapThreshold
Indicaes the number of link flaps allowed for the specified port
during the time window before the port is shutdown. |
Integer32r/w Constraints: range: 2-10 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.3 |
||||
|
alaLinkMonLinkErrorThreshold
Indicates the number of link errors allowed on Rx for the specified port
during the time window before the port is shutdown. The errors are the MAC errors that include CRC, lost frames, error frames, alignment frames. |
Integer32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.4 |
alaLinkMonStatsTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9
·
1 row entry
·
10 columns
A list of Link Monitoring Statistics
A collection of Link Monitoring statistics for a particular
Ethernet interface.
Ethernet interface.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
alaLinkMonStatsClearStats
Used to Clear all Statistics counters.
The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port. By default, this object contains zero value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.1 |
||||||
|
alaLinkMonStatsPortState
Indicates the status of the port.
up(1) means the port is physically up, down(2) means the port is physically down, shutdown(3) means the interface is shutdown because of excessive link flaps or link errors. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.2 |
||||||
|
alaLinkMonStatsCurrentLinkFlaps
Indicates the number of Link flaps in the current time window.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.3 |
||||||
|
alaLinkMonStatsCurrentErrorFrames
Indicates the number of error frames in the current time window.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.4 |
||||||
|
alaLinkMonStatsCurrentCRCErrors
Indicates the number of CRC errors in the current time window.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.5 |
||||||
|
alaLinkMonStatsCurrentLostFrames
Indicates the number of Rx Lost frames in the current time window.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.6 |
||||||
|
alaLinkMonStatsCurrentAlignErrors
Indicates the number of Rx alignment frames in the current time window.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.7 |
||||||
|
alaLinkMonStatsCurrentLinkErrors
Indicates the sum of all the MAC Errors within the current time window.
i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, alaLinkMonCurrentLosFrames, alaLinkMonStatsCurrentAlignErrors. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.8 |
||||||
|
alaLinkMonStatsTotalLinkFlaps
Indicates the total number of link flaps across all the time windows.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.9 |
||||||
|
alaLinkMonStatsTotalLinkErrors
Indicates the total number of link errors across all the time windows.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.10 |
alaLFPGroupTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10
·
1 row entry
·
5 columns
A list of Link Fault Propagation Grooups and their status
The list of Link Fault Propagation group id and status for each group
Indexes
alaLFPGroupId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
alaLFPGroupId
Indicates the unique group id for Link Fault Propagation (LFP).
|
Integer32 Constraints: range: 1-8 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.1 |
||||||||||||
|
alaLFPGroupAdminStatus
Indicates the admin status of the group. disable(0) means link fault propagation,
is disbaled. enable(1) means link fault propagation is enabled |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.2 |
||||||||||||
|
alaLFPGroupOperStatus
Indicates the operational status of the group. down(0) means all the source ports are down,
up(1) means atleast one source port in the group is up. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.3 |
||||||||||||
|
alaLFPGroupWaitToShutdown
0 - Disable wait to shutdown timer
Range 5 - 300, in multiples of 5. After expiry of this timer all destination ports will be shutdown |
Integer32r/w Constraints: range: 0-300 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.4 |
||||||||||||
|
alaLFPGroupRowStatus
Row Status for initiating a MIB retrieval request.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.5 |
alaLFPConfigTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11
·
1 row entry
·
3 columns
A list of Link Fault Propagation port and port type of each LFP group
A list of Link Fault Propagation port and port type of each LFP group
Indexes
alaLFPGroupId alaLFPConfigPort
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
alaLFPConfigPort
Indicates ifindex of source/destination port for a LFP Group.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.1 |
||||||||||||
|
alaLFPConfigPortType
Indicates the type of port, (1) means the port is destination port and
(2) means the port is a source port for a LFP Group. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.2 |
||||||||||||
|
alaLFPConfigRowStatus
Row Status for initiating a MIB retrieval request.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.3 |
esmSlotInfoTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12
·
1 row entry
·
2 columns
ESM Slot information table.
A ESM Physical slot entry.
Indexes
esmSlotNumber
| Column | Syntax | OID |
|---|---|---|
|
esmSlotNumber
The slot number on stack.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1.1 |
|
esmNumberOfUserPorts
The number of user ports on specified slot number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1.2 |
esmPtpStatsTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13
·
1 row entry
·
8 columns
The table lists the Statistics params of PTP.
An entry corresponding to each port.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
esmPtpStatsIngPtpv2
The number of PTP V2 packets ingress in to the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.1 |
|
esmPtpStatsIngPtpv1
The number of PTP V1 packets ingress in to the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.2 |
|
esmPtpStatsIngPtpDrop
The number of PTP packets dropped at ingress by the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.3 |
|
esmPtpStatsIngPtpPigBag
The number of PTP Piggy Bag added to ingress packets in the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.4 |
|
esmPtpStatsEgrPtpv2
The number of PTP V2 packets egress from the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.5 |
|
esmPtpStatsEgrPtpv1
The number of PTP V1 packets egress from the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.6 |
|
esmPtpStatsEgrPtpDrop
The number of PTP packets dropped at egress by the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.7 |
|
esmPtpStatsEgrPtpUpdateRes
The number of PTP residence time updated packets in the port
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.8 |
esmStackPortTable
table.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14
·
1 row entry
·
25 columns
A list of Stacking Link statistics
A collection of statistics kept for a Stacking Link.
Indexes
esmStackPortIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
esmStackPortIfIndex
A unique value, greater than zero, for each stack port interface.
|
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.1 |
||||||||||||
|
esmStackPortSlotNum
The on-board slot number of stack ports.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.2 |
||||||||||||
|
esmStackPortInOctets
The total number of octets received on the stacking interface,
including framing characters. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.3 |
||||||||||||
|
esmStackPortOutOctets
The total number of octets transmitted out of the
stacking interface, including framing characters. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.4 |
||||||||||||
|
esmStackPortInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.5 |
||||||||||||
|
esmStackPortOutUcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.6 |
||||||||||||
|
esmStackPortInMulticastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.7 |
||||||||||||
|
esmStackPortOutMulticastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.8 |
||||||||||||
|
esmStackPortInBroadcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.9 |
||||||||||||
|
esmStackPortOutBroadcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.10 |
||||||||||||
|
esmStackPortInPauseFrames
A count of MAC Control frames received on stacking
interface with an opcode indicating the PAUSE operation. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.11 |
||||||||||||
|
esmStackPortOutPauseFrames
A count of MAC Control frames transmitted on
stacking interface with an opcode indicating the PAUSE operation. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.12 |
||||||||||||
|
esmStackPortStatsAlignmentErrors
A count of frames received on the stacking
interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented w… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.13 |
||||||||||||
|
esmStackPortStatsFCSErrors
A count of frames received on the stacking
interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short err… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.14 |
||||||||||||
|
esmStackPortInErrors
For a stacking interface, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbou… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.15 |
||||||||||||
|
esmStackPortOutErrors
For a stacking interface, the number of outbound packets
that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could no… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.16 |
||||||||||||
|
esmStackPortInDiscards
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.17 |
||||||||||||
|
esmStackPortOutDiscards
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.18 |
||||||||||||
|
esmStackPortTxCollisions
The estimate of the total number of collisions.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.19 |
||||||||||||
|
esmStackPortRxUndersizePkts
The total number of packets received that were
less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.20 |
||||||||||||
|
esmStackPortTxUndersizePkts
The total number of packets transmitted that were
less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.21 |
||||||||||||
|
esmStackPortRxOversizePkts
The total number of packets received that were
longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.22 |
||||||||||||
|
esmStackPortTxOversizePkts
The total number of packets transmitted that were
longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.23 |
||||||||||||
|
esmStackPortAutoSpeed
The automatically detected port line speed
of the stack port. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.24 |
||||||||||||
|
esmStackPortClearStats
Used to Clear all Stack Port Statistics counters.
By default, this object contains zero value. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.25 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5
·
1 row entry
·
2 columns
A list of Interface Violation Recovery Configuration Parameters
A collection of Interface Violation Recovery configurations kept for a particular
Ethernet interface.
Ethernet interface.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
alaPortViolationRecoveryTime
-1 - value in scalar object esmViolationRecoveryTime
0 - Disable the timer 30 - 600 - timeout value to re-enable the ports that have been shutdown |
Integer32r/w Constraints: range: -1-600 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1.1 |
|
alaPortViolationRecoveryMaximum
-1 - value in scalar object esmViolationRecoveryMaximum
0 - recovery mechanism is disabled 1 - 50 - The maximum number of recovery attempts before a port is shudown. |
Integer32r/w Constraints: range: -1-50 |
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1.2 |