esmPortAutoDuplexMode
ALCATEL-IND1-PORT-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.4
Object
column
Enumeration
The automatically detected port duplex mode
of this ESM port.
Note: GigaEthernet supports only Full duplex mode.
Default value for 10/100 = Half duplex mode.
Context
- MIB
- ALCATEL-IND1-PORT-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- esmConfEntry
- Table
- esmConfTable
- Siblings
- 41
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | fullDuplex |
2 | halfDuplex |
3 | autoDuplex |
4 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esmPortSlot The physical Slot number for this Ethernet Port.
Slot number has been added to be used by the private Trap. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.1 |
| esmPortFloodMcastEnable Enable/disable the maximum flood rate
for multicast. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.10 |
| esmPortCfgMaxFrameSize Configure the value of the maximum frame
size allow.
For 10/100:
It is a range between 1518(untagged) and 1553 bytes.
For GigaEthernet:
It is a range between 1518 and 10240 by… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.11 |
| esmPortCfgLongEnable Allow the user to change the maximun Frame size.
Note: It is not configurable for 10/100 Ethernet port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.12 |
| esmPortCfgRuntEnable Allow the user to change the minimum Frame size. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.13 |
| esmPortCfgRuntSize Configure the value of the minimum frame
size allow per ports.
The range is 0 to 64. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.14 |
| esmPortCfgAutoNegotiation Allow the user to enable or disable the port auto negotiation. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.15 |
| esmPortCfgCrossover Allow the user to configure port crossover. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.16 |
| esmPortCfgFlow Use the dot3PauseAdminMode from the standard MIB to configure the flow control. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.17 |
| esmPortCfgHybridActiveType This object is only applicable to hybrid ports .
It indicates configured active media type.(the operational media
type may be different if esmPortCfgHybridMode is configured to be… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.18 |
| esmPortCfgHybridMode This object is only applicable to hybrid ports.
This allows the user the user to configure the media type
with which the port should come up.
The user can configure the port to … | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.19 |
| esmPortIF The on-board interface number for this Ethernet Port.
Port Number has been added to be used by the private Trap. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.2 |
| esmPortOperationalHybridType This object is only applicable to hybrid ports .
It indicates the actual media type that has link up and is or will be
passing traffic. If link is not present the object will ret… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.20 |
| esmPortCfgMMULowWaterMarkCellSetLimit Per-port-per-CoS Head of Line blocking cell limits. Range is 0 - 16383
Firebolt register Offset: 0x006pp30 - 0x37
Bits: 13:0 CellSetLimit , Default: 0x0100
This setting allocates … | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.21 |
| esmPortCfgMMUDynamicCellSetLimit Per-egress port cell-based dynamic (shared buffer pool) memory
usage drop and resume thresholds. This sets the limit for which
the eight CoS-Qs within a port may share once the LW… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.22 |
| esmPortViolationBitMap A bit map that identifies the set of Application that have blocked
a port as a result of a particular violation | column | Bits | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.23 |
| esmPortViolationClearAll Clear all port vioaltion | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.24 |
| esmPortFloodBcastEnable Enable/disable the maximum flood rate
for Broadcast. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.25 |
| esmPortFloodUnknownUcastEnable Enable/disable the maximum flood rate
for unknown unicast. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.26 |
| esmPortMaxUnknownUcastFloodRate Unknown-Unicast flood threshold type. To set the type, set esmPortMaxUnknownUcastFloodRateLimit also.
The default value for flood rate is:
1. 4 mbps if the port speed is 10 … | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.27 |
| esmPortMaxMcastFloodRate Multicast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also.
The default value for flood rate is:
1. 4 mbps if the port speed is 10 mbps,
2. 49 mbps if th… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.28 |
| esmPortMaxFloodRateLimit The value of the maximum broadcast flood limit.
The actual range of the flood limit depends on the port speed.
example:
Percentage: 1 - 100
Mbps: 1 - 1000 (1G speed)
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.29 |
| esmPortAutoSpeed The automatically detected port line speed
of this ESM port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.3 |
| esmPortMaxUnknownUcastFloodRateLimit The value of the maximum unknown-unicast flood limit
The actual range of the flood limit depends on the port speed.
example:
Percentage: 1 - 100
Mbps: 1 - 1000 (1G speed… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.30 |
| esmPortMaxMcastFloodRateLimit The value of the maximum multicast flood limit
The actual range of the flood limit depends on the port speed.
example:
Percentage: 1 - 100
Mbps: 1 - 1000 (1G speed)
P… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.31 |
| esmPortCfgSFPType This object is only applicable to fiber ports.
The string indicates the type of SFP/GBIC of active media. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.32 |
| esmPortWaitToRestoreTimer Indicates the number of seconds after which the link up
event is notified to other applications.
The timer is started whenever a Link Up is detected on a port being monitored. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.33 |
| esmPortMinFloodRateLimit The value of the minimum broadcast flood limit
this value should be same type as that of the
maximum value configured for broadcast traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.34 |
| esmPortMinMcastFloodRateLimit The value of the minimum multicast flood limit
this value should be same type as that of the
maximum value configured for multicast traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.35 |
| esmPortFloodThresholdAction The action to be taken when the broadcast
traffic exceeding the maximum configured value. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.36 |
| esmPortMcastThresholdAction The action to be taken when the multicast
traffic exceeding the maximum configured value. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.37 |
| esmPortFlood The state of the port, is it having normal or stormed broad
cast traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.38 |
| esmPortMCastStorm The state of the port, is it having normal or stormed
mulit cast traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.39 |
| esmPortCfgEeeStatus Allow the user to enable or disable the port EEE mode. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.40 |
| esmPortCfgEeeAutoNegState Current autoneg state of EEE enabled port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.41 |
| esmPortCfgEeeCapability Current cpapbility of EEE enabled port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.42 |
| esmPortCfgSpeed The configured port line speed of this ESM port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.5 |
| esmPortCfgDuplexMode The configured port duplex mode of this ESM port.
Note: GigaEthernet support only full-duplex. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.6 |
| esmPortCfgIFG Contains the setting of Inter-Frame Gap (IFG), in bytes
for receive and transmit.
The range is from 9 to 12 bytes.
Note: The default value changed according to th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.7 |
| esmPortPauseSlotTime Indicates the number of microseconds the other
end-station waits after the reception
of a pause frame.
Note: Pause Flow control is not available for 10Mbps.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.8 |
| esmPortMaxFloodRate Broadcast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also.
The default value for flood rate is:
1. 4 mbps if the port speed is 10 mbps,
2. 49 … | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.9 |