ALCATEL-IND1-CHASSIS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
91

chasEntPhysicalTable

table
.1.3.6.1.4.1.6486.800.1.1.1.1.1.1 · 1 row entry · 38 columns
Open in standard view 
This table contains one row per physical entity. It is an extension for
the entity physical table (rfc 2737) that is instantiated for every physical entity
object. The fields are not always significant for every object.
chasEntPhysicalEntry entry .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1
Information about a particular physical entity.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasEntPhysAdminStatus
All modules (even empty slots) are in unknown state when the chassis
first powers up.

Chassis status possible value:
powerOn <=> powered up

Control Module possible value:
powerOn <=> CM u…
Enumerationr/w
Enumerated Values:
1unknown
2powerOff
3powerOn
4reset
5takeover
6resetAll
7standby
8resetWithFabric
9takeoverWithFabrc
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.1
chasEntPhysOperStatus
All modules (even empty slots) are in unknown state when the chassis
first powers up.

Chassis status possible value :
up <=> powered up

Control Module possible value :
notPresent <=> CM n…
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5secondary
6notPresent
7unpowered
8master
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.2
chasEntPhysLedStatus deprecated
This object has been deprecated because the other enumerated objects can provide the same information.
A get to this object will return 0.

The status of each of the LEDs of this module.

Fuj…
Bits
Enumerated Values:
0ok1GreenLSBit
1ok1GreenMSBit
2ok1AmberLSBit
3ok1AmberMSBit
4ok2GreenLSBit
5ok2GreenMSBit
6ok2AmberLSBit
7ok2AmberMSBit
8controlGreenLSBit
9controlGreenMSBit
10controlAmberLSBIt
11controlAmberMSBIt
12fabricGreenLSBit
13fabricGreenMSBit
14fabricAmberLSBit
15fabricAmberMSBit
16tempGreenLSBit
17tempGreenMSBit
18tempAmberLSBit
19tempAmberMSBit
20fanGreenLSBit
21fanGreenMSBit
22fanAmberLSBit
23fanAmberMSBit
24powerSupGreenLSBit
25powerSupGreenMSBit
26powerSupAmberLSBit
27powerSupAmberMSBit
28backupPowerSupGreenLSBit
29backupPowerSupGreenMSBit
30backupPowerSupAmberLSBit
31backupPowerSupAmberMSBit
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.3
chasEntPhysPower
This value is only applicable to the NI, PS and Control Modules. It
corresponds to a a static value for the power consumption of an NI
module or Control Module. This value is in Watts.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.4
chasEntPhysModuleType
This object is the unique Module Type or ID from the entities eeprom.
This value is guarrantteed to be unique to each type of Module.
This value is only intended for Alcatel internal use.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.5
chasEntPhysMfgDate
This object contains the manufacturing date of the entity.
Its format is mmm dd yyyy : NOV 27 2001.
OctetString
Constraints:
range: 0-11
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.6
chasEntPhysPartNumber
This object contains the Alcatel Part Number for the entity.
This value is used to identify what is
needed when placing orders with Alcatel.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.7
chasEntPhysLedStatusOk1
Chassis Management Module (CMM) front panel LED OK1 status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.8
chasEntPhysLedStatusOk2
Chassis Management Module (CMM) front panel LED OK2 status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.9
chasEntPhysLedStatusPrimaryCMM
Chassis Management Module (CMM) front panel LED Primary chassis indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.10
chasEntPhysLedStatusSecondaryCMM
Chassis Management Module (CMM) front panel LED Secondary chassis indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.11
chasEntPhysLedStatusTemperature
Chassis Management Module (CMM) front panel LED temperature status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.12
chasEntPhysLedStatusFan
For Hawk stacks used as a fan group status LED. For eagle CMM's user instead:
Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.13
chasEntPhysLedStatusFan1
Chassis fan status, Eagle (top left), Fuji (top right)
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.14
chasEntPhysLedStatusFan2
Chassis fan status, Eagle (top right), Fuji (middle right)
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.15
chasEntPhysLedStatusFan3
Chassis fan status, Eagle (rear), Fuji (bottom right)
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.16
chasEntPhysLedStatusBackupPS
Chassis backup power supply status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.17
chasEntPhysLedStatusInternalPS
Chassis internal power supply status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.18
chasEntPhysLedStatusControl
Chassis control status
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.19
chasEntPhysLedStatusFabric
Chassis Management Module (CMM) Fabric status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.20
chasEntPhysLedStatusPSU
Chassis Power Supply Unit status indication
ChasEntPhysLed
Textual Convention: ChasEntPhysLed Enumeration
Type Values:
0notApplicable
1off
2greenOn
3greenBlink
4amberOn
5amberBlink
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.21
chasEntPhysAsicRev
This object contains the ASIC revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.22
chasEntPhysCpldRev
This object contains the CPLD revision Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.23
chasEntPhysDefaultMinibootRev
This object contains the default miniboot version Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.24
chasEntPhysBackUpMinibootRev
This object contains the backup miniboot version Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.25
chasEntPhysBootromRev
This object contains the bootrom version Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.26
chasEntPhysNiNum
This value is only applicable to the NI. It indicates an NI associated with this physicalEntry
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.27
chasEntPhysGbicNum
This value is only applicable to the NI. It indicates a gbic associated with this ni
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.28
chasEntPhysWaveLen
This object contains the wave length of a SFP device
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.29
chasEntPhysUbootRev
This object contains the uboot version Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.30
chasEntPhysUbootMinibootRev
This object contains the uboot miniboot version Number of the ni entity
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.31
chasEntPhysMacAddress
This object contains the MAC address of the ni entity
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.32
chasEntPhysPoeSwVersion
This object contains the POE SW Revision of the ni entity
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.33
chasEntPhysC20LFailCont
This object contains the C20L upgrade failure count of the ni entity
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.34
chasEntPhysCpuModel
This object contains the model description of the cmm/ni cpu
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.35
chasEntPhysPowerType
This object specifies the type(AC/DC) of power supply.
ChasEntPhysPowerType
Textual Convention: ChasEntPhysPowerType Enumeration
Type Values:
0notApplicable
1ac
2dc
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.36
chasEntPhysPowerControlChecksum
This object specifies the power control checksum.
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.37
chasEntPhysDdmStatus
This object contains the Ddm Status of a SFP device
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.38

chasControlModuleTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1 · 1 row entry · 8 columns
Open in standard view 
This table contains one row for the primary control module.
chasControlModuleEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1
Information about the primary control module. This table is an extension
of the entity physical table but this class is instanciated only for a
the primary control module that has a particular Index.
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasControlRunningVersion
Identification of the Running Version (or Running Configuration) for
the control module. Note that the Running Version value of (1) unknown,
(2) working, or (3) certified is returned.
Enumeration
Enumerated Values:
1unknown
2working
3certified
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.1
chasControlActivateTimeout
This value is in seconds. It represents how much time before the
switch automatically falls back to the certified version. This value
is set via the Activate(reload working) cli command.
An Activate reboot must be initi…
Integer32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.2
chasControlVersionMngt
For the primary this means:
notSignificant - No command applied.
certifySynchro - Copy the file from the working to the certified
directory and from the primary to the secondary
(reboot of the seco…
Enumerationr/w
Enumerated Values:
1notSignificant
2certifySynchro
3certifyNoSynchro
4flashSynchro
5restore
6activate
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.3
chasControlDelayedActivateTimer
Timer value in seconds used to initiate a delayed activate of the primary
CMM. Writing this object to a non-zero value results in CMM reboot of the
working directory following expiration of the specified activate timer…
Unsigned32r/w
Constraints:
range: 0-31622400
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.4
chasControlCertifyStatus
Returned value indicates if the control module has been certified
(that is the working directory matches the certified directory)
Enumeration
Enumerated Values:
1unknown
2needCertify
3certified
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.5
chasControlSynchronizationStatus
Returned value indicates if the control module has been synchronized
(that is the working directory matches the working directory
on the other control module(s) if present). Returned value is
monoControlModule when no…
Enumeration
Enumerated Values:
1unknown
2monoControlModule
3notSynchronized
4synchronized
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.6
chasControlAcrossCmmWorkingSynchroStatus
Returned value indicates if the /working has been synchronized
across the CMMs (that is the working directory matches the working directory
on all CMMs if present)
Enumeration
Enumerated Values:
1unknown
2monoCMM
3no
4yes
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.7
chasControlAcrossCmmCertifiedSynchroStatus
Returned value indicates if the /certified has been synchronized
across the CMMs if present)
Enumeration
Enumerated Values:
1unknown
2monoCMM
3no
4yes
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.8

chasControlRedundantTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2 · 1 row entry · 2 columns
Open in standard view 
This table contains one row per control module. There is always at least
one control module in the system.
chasControlRedundantEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1
Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasControlNumberOfTakeover
This object is a count of the number of times the control module has
changed from primary to secondary mode as a result of a Takeover. Note
that this object can be accessed via user interface to either the
primary or se…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.1
chasControlDelayedRebootTimer
Timer value (in seconds) used to initiate a delayed reboot of the primary
or secondary CMM using the certified configuration. Writing this object to
a non-zero value results in a CMM reboot following expiration of the
…
Unsigned32r/w
Constraints:
range: 0-31622400
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.2

chasChassisTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3 · 1 row entry · 9 columns
Open in standard view 
This table contains one row per chassis. There is always at least one
chassis or many like for stackable product.
chasChassisEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1
Information about a particular control module this table is an extension
of the entity physical table but this class is instanciated only for a
particular type of physical entity: the control module that has a
particula…
Indexes
ENTITY-MIBentPhysicalIndex
Column Syntax OID
chasFreeSlots
The number of free NI front panel slots.
Unsigned32
Constraints:
range: 0-18
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.1
chasPowerLeft
The power still available on the chassis in Watts.
Integer32
Constraints:
range: -100000-100000
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.2
chasNumberOfResets
This object is a count of the number of times this station has been reset
since a cold-start.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.3
chasHardwareBoardTemp
This object indicates the current output of the Board Temperature
Sensor provided by the LM75 part (degrees Centigrade) for this chassis.
This temperature is what is used for comparing to the threshold and
determining w…
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.4
chasHardwareCpuTemp
This object indicates the current output of the SPARC Temperature
Sensor (degrees Centigrade) for this chassis.
This object is not applicable for Hawk and 0 is returned
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.5
chasTempRange
Temp Range is the value of the temperature sensor for the chassis. The
Temp Range value reflects the temperature of the chassis relative to the
Temp Threshold value (i.e., over vs. under the threshold).
Enumeration
Enumerated Values:
1unknown
2notPresent
3underThreshold
4overFirstThreshold
5overDangerThreshold
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.6
chasTempThreshold
This object is the threshold temperature in degrees Celsius for the
chassis. Temp Threshold is the chassis temperature point at which,
when reached due to an ascending or descending temperature transition,
a temperature…
Integer32r/w
Constraints:
range: 1-150
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.7
chasDangerTempThreshold
This Threshold is a second one which is hardcoded. When the
Chassis Exceeds this value it starts shutting down NIs.
This value will be set by the factory and not changeable.
Integer32
Constraints:
range: 30-150
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.8
chasPrimaryPhysicalIndex
This value holds the Entity Table Physical Index for the Control
Module that is currently primary. This is to allow snmp managers
to determine which Control Module is currently primary so it knows
what entry in the chas…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.9

chasSupervisionRfsLsTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4 · 1 row entry · 8 columns
Open in standard view 
This table contains a list of file on the remote chassis per directory.
chasSupervisionRfsLsEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1
Information about a remote file.
A row in this table contains a file per directory per chassis
Indexes
chasSupervisionRfsLsFileIndex
Column Syntax OID
chasSupervisionRfsLsFileIndex
This value holds file Index for the RFS LS table.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.1
chasSupervisionRfsLsSlot
Slot where remote file is located.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.2
chasSupervisionRfsLsDirName
The remote directory name where remote file is located in
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.3
chasSupervisionRfsLsFileName
The file name of remote file
OctetString
Constraints:
range: 0-33
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.4
chasSupervisionRfsLsFileType
The Type of a remote file
Enumeration
Enumerated Values:
1file
2directory
3undefined
4tarArchive
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.5
chasSupervisionRfsLsFileSize
size of this remote file
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.6
chasSupervisionRfsLsFileAttr
attributes of this remote file
Enumeration
Enumerated Values:
1undefined
2readOnly
3readWrite
4writeOnly
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.7
chasSupervisionRfsLsFileDateTime
the modification date and time of a remote file
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.8

chasControlReloadStatusTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6 · 1 row entry · 2 columns
Open in standard view 
Table containing reload status of each network interface
slot or stack module
chasControlReloadEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1
Entry of a network interface reload status
Indexes
chasControlReloadIndex
Column Syntax OID
chasControlReloadIndex
Entry of a network interface reload status
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.1
chasControlReloadStatus
Returned value indicates if the network interface module is
enabled or disabled for reload.
Enumeration
Enumerated Values:
1reloadEnabled
2reloadDisabled
3noInterface
4unknown
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.2

chasSupervisionRfsDfTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8 · 1 row entry · 3 columns
Open in standard view 
This table contains information about file system size and use.
chasSupervisionRfsDfEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1
This entry contains information about file system size and use.
Indexes
chasSupervisionRfsDfSlot
Column Syntax OID
chasSupervisionRfsDfSlot
CMM Slot where flash space is evaluated.
Slot index 1-16 will return slot 1-16 flash drive information.
Slot index 17-32 will return slot 1-16 uflash drive information.
Enumeration
Enumerated Values:
1slot1Flash
2slot2Flash
3slot3Flash
4slot4Flash
5slot5Flash
6slot6Flash
7slot7Flash
8slot8Flash
9slot9Flash
10slot10Flash
11slot11Flash
12slot12Flash
13slot13Flash
14slot14Flash
15slot15Flash
16slot16Flash
17slot1Uflash
18slot2Uflash
19slot3Uflash
20slot4Uflash
21slot5Uflash
22slot6Uflash
23slot7Uflash
24slot8Uflash
25slot9Uflash
26slot10Uflash
27slot11Uflash
28slot12Uflash
29slot13Uflash
30slot14Uflash
31slot15Uflash
32slot16Uflash
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.1
chasSupervisionRfsDfFlashFree
Number bytes free on the file system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.2
chasSupervisionRfsDfFlashSize
Number of total bytes on the file system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.3

chasSupervisionFlashMemTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9 · 1 row entry · 4 columns
Open in standard view 
This table contains the systems flash memory information.
chasSupervisionFlashMemEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1
This contains one entry for the flash memory table.
Indexes
chasSupervisionSlot
Column Syntax OID
chasSupervisionSlot
CMM Slot where flash space is evaluated.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.1
chasSupervisionFlashSize
Flash memory size.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.2
chasSupervisionFlashFree
Number bytes free on file system.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.3
chasSupervisionFlashUsed
A rounded up percentage of Flash Memory used.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.4

chasSupervisionCmmCertifiedTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10 · 1 row entry · 2 columns
Open in standard view 
This table contains...
chasSupervisionCmmCertifiedEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1
Information about...
Indexes
chasSupervisionCmmNum
Column Syntax OID
chasSupervisionCmmNum
CMM Slot where /certified directory is evaluated.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.1
chasSupervisionCmmCertifiedStatus
The status of the CMM certified directory - certified or not.
Enumeration
Enumerated Values:
0notPresent
1yes
2no
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.2

alaChasEntPhysFanTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11 · 1 row entry · 2 columns
Open in standard view 
This table contains one row per physical fan entity.
alaChasEntPhysFanEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1
Information about a particular fan in a chassis physical entity.
Indexes
ENTITY-MIBentPhysicalIndex alaChasEntPhysFanLocalIndex
Column Syntax OID
alaChasEntPhysFanLocalIndex
Index to a chassis fan entity
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.1
alaChasEntPhysFanStatus
Chassis fan operational status
Enumeration
Enumerated Values:
0noStatus
1notRunning
2running
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.2

alaChasBpsTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31 · 1 row entry · 3 columns
Open in standard view 
This table contains BPS connector priority for each slot
alaChasBpsEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1
Information about bps connector priority for each slot
Indexes
alaChasBpsNiNum
Column Syntax OID
alaChasBpsNiNum
Numbers allocated for the stack NIs as follows:
- 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable
Unsigned32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.1
alaChasBpsConnectorPriority
This object specifies the bps connector priority.
Unsigned32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.2
alaChasBpsConnectorNum
This object specifies the bps connector num.
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.3

alaChasBpsPowerSupplyTable

table
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32 · 1 row entry · 10 columns
Open in standard view 
This table contains   BPS power supplies details
alaChasBpsPowerSupplyEntry entry .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1
Information about a particular BPS power supply
Indexes
alaChasBpsPowerSupplyIndex
Column Syntax OID
alaChasBpsPowerSupplyIndex
This value hold BPS power power supply Index
Unsigned32
Constraints:
range: 1-5
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.1
alaChasBpsPowerSupplyName
This object hold name of BPS power supply
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.2
alaChasBpsPowerSupplyDescr
This object hold description of BPS power supply
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.3
alaChasBpsPowerSupplyModuleType
This object is unique module Type or ID from BPS entities eeprom
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.4
alaChasBpsPowerSupplyPartNumber
This object contains the BPS power supply Part Number
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.5
alaChasBpsPowerSupplyHardwareRev
The vendor-specific hardware revision string for the
BPS power supplies
Note that if revision information is stored internally in a
non-printable (e.g., binary) format, then the agent must
convert such information to a…
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.6
alaChasBpsPowerSupplySerialNum
The vendor-specific serial number string for the
BPS power supplies
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.7
alaChasBpsPowerSupplyMfgDate
This object contains the manufacturing date of the BPS power supplies .
Its format is mmm dd yyyy : NOV 27 2012.
OctetString
Constraints:
range: 0-11
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.8
alaChasBpsPowerSupplyOperStatus
Oper status of BPS power supply
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.9
alaChasBpsPowerSupplyPowerProv
It corresponds to max power of BPS power supply.
This value is in Watts.
Integer32
Constraints:
range: 0-2000
 .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.10