chasEntPhysLedStatus

This object has been deprecated because the other enumerated objects can provide the same information.
A get to this object will return 0.
              
The status of each of the LEDs of this module.
              
Fuji CFM:
              
[31:30] BPSU amber      00=off    01=on    10=reserved    11=blinking
[29:28] PSU green       00=off    01=on    10=reserved    11=blinking
[27:26] PSU amber       00=off    01=on    10=reserved    11=blinking 
[25:24] PSU green       00=off    01=on    10=reserved    11=blinking 
[23:22] Fan amber       00=off    01=on    10=reserved    11=blinking 
[21:20] Fan green       00=off    01=on    10=reserved    11=blinking 
[19:18] Temp amber      00=off    01=on    10=reserved    11=blinking 
[17:16] Temp green      00=off    01=on    10=reserved    11=blinking 
[15:14] Fabric amber    00=off    01=on    10=reserved    11=blinking 
[13:12] Fabric green    00=off    01=on    10=reserved    11=blinking 
[11:10] Control amber   00=off    01=on    10=reserved    11=blinking 
[9:8]   Control green   00=off    01=on    10=reserved    11=blinking 
[7:6]   OK2 amber       00=off    01=on    10=reserved    11=blinking
[5:4]   OK2 green       00=off    01=on    10=reserved    11=blinking
[3:2]   OK1 amber       00=off    01=on    10=reserved    11=blinking
[1:0]   OK1 green       00=off    01=on    10=reserved    11=blinking
              
Falcon CMM:
              
[11]    Fan 		1=Green (ok)	0=amber (fail)
[10]    Temperature	1=Green (ok)	0=amber (fail)
[9]     Secondary CMM	1=amber		0=OFF
[8]     Primary CMM	1=amber		0=OFF
[7:6]   OK2 amber	00=off		01=on		10=blink	11=reserved
[5:4]   OK2 green 	00=off		01=on		10=blink	11=reserved
[3:2]   OK1 amber	00=off		01=on		10=blink	11=reserved
[1:0]   OK1 green	00=off		01=on		10=blink	11=reserved
              
Eagle CMM:
              
[17:16] Fan 3 (rear)		00=amber	01=green	10=blink	11=reserved
[15:14] Fan 2 (top right)	00=amber	01=green	10=blink	11=reserved
[13:12] Fan 1 (top left)	00=amber	01=green	10=blink	11=reserved
[11]    Status			1=Green (ok)	0=amber (fail)
[10]    Temperature		1=Green (ok)	0=amber (fail)
[9]     Secondary CMM		1=amber		0=OFF
[8]     Primary CMM		1=amber		0=OFF
[7:6]   OK2 amber		00=off		01=on		10=blink	11=reserved
[5:4]   OK2 green		00=off		01=on		10=blink	11=reserved
[3:2]   OK1 amber		00=off		01=on		10=blink	11=reserved
[1:0]   OK1 green		00=off		01=on		10=blink	11=reserved
              
              
Hawk Stack:
              
[19]    fanGroup	1=Green (ok)	0=amber (fail)
[18]    internalPS	1=Green (ok)	0=amber (fail)
[11]    backupPS	1=Green (ok)	0=amber (fail)
[10]    Temperature	1=Green (ok)	0=amber (fail)
[9]     Secondary CMM	1=amber		0=OFF
[8]     Primary CMM	1=amber		0=OFF
[7:6]   OK2 amber	00=off		01=on		10=blink	11=reserved
[5:4]   OK2 green 	00=off		01=on		10=blink	11=reserved
[3:2]   OK1 amber	00=off		01=on		10=blink	11=reserved
[1:0]   OK1 green	00=off		01=on		10=blink	11=reserved
              
NI:
              
[7:6]   OK2 amber	00=off	01=on	10=blink	11=reserved
[5:4]   OK2 green	00=off	01=on	10=blink	11=reserved
[3:2]   OK1 amber	00=off	01=on	10=blink	11=reserved
[1:0]   OK1 green	00=off	01=on	10=blink	11=reserved
              
              
FABRIC (Eagle Only):
              
[7:6]	OK2 Yellow LED	01=on	00=off	10=blink	11=reserved
[5:4]	OK2 Green LED	01=on	00=off  10=blink	11=reserved
[3:2]	OK1 Yellow LED	01=on	00=off  10=blink	11=reserved
[1:0]	OK1 Green LED	01=on	00=off	10=blink	11=reserved
              
              
              
NOTE: 	Due to European regulation, the LEDs will NEVER be illuminated RED!
They in fact will be either green OR amber.

MIB

ALCATEL-IND1-CHASSIS-MIB

OID

.1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.3

Type

column

Access

readonly

Status

deprecated

Parent

chasEntPhysicalEntry