chasHardwareBoardTemp
ALCATEL-IND1-CHASSIS-MIB ·
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.4
Object
column
Integer32
This object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for this chassis. This temperature is what is used for comparing to the threshold and determining whether the value is in range.
Context
- MIB
- ALCATEL-IND1-CHASSIS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- chasChassisEntry
- Table
- chasChassisTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-200
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| chasFreeSlots The number of free NI front panel slots. | column | Unsigned32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.1 |
| chasPowerLeft The power still available on the chassis in Watts. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.2 |
| chasNumberOfResets This object is a count of the number of times this station has been reset
since a cold-start. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.3 |
| chasHardwareCpuTemp This object indicates the current output of the SPARC Temperature
Sensor (degrees Centigrade) for this chassis.
This object is not applicable for Hawk and 0 is returned | column | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.5 |
| chasTempRange Temp Range is the value of the temperature sensor for the chassis. The
Temp Range value reflects the temperature of the chassis relative to the
Temp Threshold value (i.e., over vs… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.6 |
| chasTempThreshold This object is the threshold temperature in degrees Celsius for the
chassis. Temp Threshold is the chassis temperature point at which,
when reached due to an ascending or descendi… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.7 |
| chasDangerTempThreshold This Threshold is a second one which is hardcoded. When the
Chassis Exceeds this value it starts shutting down NIs.
This value will be set by the factory and not changeable. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.8 |
| chasPrimaryPhysicalIndex This value holds the Entity Table Physical Index for the Control
Module that is currently primary. This is to allow snmp managers
to determine which Control Module is currently pr… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.9 |