ALCATEL-ENT1-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

670

alaQoSRuleTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1 · 1 row entry · 27 columns

Open in standard view

Table of QoS Rule definitions

alaQoSRuleEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1

Definition of QoS Rule

Indexes

alaQoSRuleName

Column Syntax OID

alaQoSRuleName

Name of rule

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.1

alaQoSRuleEnabled

Is this rule enabled or not

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.2

alaQoSRuleSource

What entity created the rule.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.3

alaQoSRulePrecedence

Precedence value for rule.
Rules are evaluated from higher precedence to lower.
If rules have equal precedence, they are evaluated in
the order they are received.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.4

alaQoSRuleCondition

Name of the condition to use

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.5

alaQoSRuleAction

Name of the action to use

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.6

alaQoSRuleReflexive

Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.7

alaQoSRuleSave

Indicator to tell whether to write out the rule during
snapshot commands.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.8

alaQoSRuleLog

Indicator to tell whether to log matches to this rule
in the QoS log.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.9

alaQoSRuleEnforced

Is this rule currenly being enforced on the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.10

alaQoSRuleActive

Is this rule enforcable by the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.11

alaQoSRuleRowStatus

Used to create/delete rules according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.12

alaQoSRuleValidityPeriod

Name of the validity period to use

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.13

alaQoSRuleValidityPeriodStatus

Status field indicating whether there is a validity period
associated with this rule

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.14

alaQoSRuleLogInterval

How often to look for packets matching this rule when logging.
When 0 log as many as possible.

Integer32r/w

Constraints:
range: 0-3600

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.15

alaQoSRuleCountType

Which rule statistics counters to update if not all are available

Enumerationr/w

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.16

alaQoSRulePacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.17

alaQoSRuleByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.18

alaQoSRuleType

The type of rule this is. Each bit represents the following:
0x1 = bridged
0x2 = routed
0x4 = multicast

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.19

alaQoSRuleTrapEvents

Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked?

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.20

alaQoSRuleDefaultList

This rule belongs to the default policy list.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.21

alaQoSRuleGreenPacketCount

Counter for the number of packets being green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.22

alaQoSRuleYellowPacketCount

Counter for the number of packets being yellow compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.23

alaQoSRuleRedPacketCount

Counter for the number of packets being red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.24

alaQoSRuleGreenByteCount

Counter for the number of packets being green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.25

alaQoSRuleYellowByteCount

Counter for the number of packets being yellow compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.26

alaQoSRuleRedByteCount

Counter for the number of packets being red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.27

alaQoSAppliedRuleTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2 · 1 row entry · 27 columns

Open in standard view

Table of QoS AppliedRule definitions

alaQoSAppliedRuleEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1

Definition of QoS AppliedRule

Indexes

alaQoSAppliedRuleName

Column Syntax OID

alaQoSAppliedRuleName

Name of rule

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.1

alaQoSAppliedRuleEnabled

Is this rule enabled or not

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.2

alaQoSAppliedRuleSource

What entity created the rule.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.3

alaQoSAppliedRulePrecedence

Precedence value for rule.
Rules are evaluated from higher precedence to lower.
If rules have equal precedence, they are evaluated in
the order they are received.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.4

alaQoSAppliedRuleCondition

Name of the condition to use

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.5

alaQoSAppliedRuleAction

Name of the action to use

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.6

alaQoSAppliedRuleReflexive

Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.7

alaQoSAppliedRuleSave

Indicator to tell whether to write out the rule during
snapshot commands.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.8

alaQoSAppliedRuleLog

Indicator to tell whether to log matches to this rule
in the QoS log.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.9

alaQoSAppliedRuleEnforced

Is this rule currenly being enforced on the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.10

alaQoSAppliedRuleActive

Is this rule enforcable by the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.11

alaQoSAppliedRuleRowStatus

Used to create/delete rules according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.12

alaQoSAppliedRuleValidityPeriod

Name of the validity period to use

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.13

alaQoSAppliedRuleValidityPeriodStatus

Status field indicating whether there is a validity period
associated with this rule

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.14

alaQoSAppliedRuleLogInterval

How often to look for packets matching this rule when logging.
When 0 log as many as possible.

Integer32

Constraints:
range: 0-3600

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.15

alaQoSAppliedRuleCountType

Which rule statistics counters to update if not all are available

Enumeration

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.16

alaQoSAppliedRulePacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.17

alaQoSAppliedRuleByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.18

alaQoSAppliedRuleType

The type of rule this is. Each bit represents the following:
0x1 = bridged
0x2 = routed
0x4 = multicast

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.19

alaQoSAppliedRuleTrapEvents

Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked?

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.20

alaQoSAppliedRuleDefaultList

This rule belongs to the default policy list.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.21

alaQoSAppliedRuleGreenPacketCount

Counter for the number of packets being green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.22

alaQoSAppliedRuleYellowPacketCount

Counter for the number of packets being yellow compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.23

alaQoSAppliedRuleRedPacketCount

Counter for the number of packets being red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.24

alaQoSAppliedRuleGreenByteCount

Counter for the number of packets being green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.25

alaQoSAppliedRuleYellowByteCount

Counter for the number of packets being yellow compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.26

alaQoSAppliedRuleRedByteCount

Counter for the number of packets being red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.27

alaQoSConditionTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3 · 1 row entry · 143 columns

Open in standard view

Table of QoS Condition definitions

alaQoSConditionEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1

Definition of QoS Condition

Indexes

alaQoSConditionName

Column Syntax OID

alaQoSConditionName

Name of condition

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.1

alaQoSConditionSource

What entity created the condition.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.2

alaQoSConditionSourceSlot

Source physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.3

alaQoSConditionSourceSlotStatus

Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.4

alaQoSConditionSourcePort

Source physical port range start to use for
traffic classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.5

alaQoSConditionSourcePortGroup

Source physical port group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.6

alaQoSConditionSourcePortGroupStatus

Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.7

alaQoSConditionDestinationSlot

Destination physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.8

alaQoSConditionDestinationSlotStatus

Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.9

alaQoSConditionDestinationPort

Destination physical port range start to use for traffic
classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.10

alaQoSConditionDestinationPortGroup

Destination physical port group to use for traffic
classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.11

alaQoSConditionDestinationPortGroupStatus

Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.12

alaQoSConditionSourceMacAddr

Source MAC address to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.13

alaQoSConditionSourceMacAddrStatus

Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.14

alaQoSConditionSourceMacMask

Source MAC mask to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.15

alaQoSConditionSourceMacGroup

Source MAC group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.16

alaQoSConditionSourceMacGroupStatus

Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.17

alaQoSConditionDestinationMacAddr

Destination MAC address to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.18

alaQoSConditionDestinationMacAddrStatus

Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.19

alaQoSConditionDestinationMacMask

Destination MAC mask to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.20

alaQoSConditionDestinationMacGroup

Destination MAC group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.21

alaQoSConditionDestinationMacGroupStatus

Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.22

alaQoSConditionSourceVlan

Source VLAN to use for traffic classification

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.23

alaQoSConditionSourceVlanStatus

Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.24

alaQoSConditionDestinationVlan

Destination VLAN to use for traffic classification

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.25

alaQoSConditionDestinationVlanStatus

Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.26

alaQoSCondition8021p

802.1p value to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.27

alaQoSCondition8021pStatus

Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.28

alaQoSConditionSourceIpAddr

Source IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.29

alaQoSConditionSourceIpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.30

alaQoSConditionSourceIpMask

Source IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.31

alaQoSConditionSourceNetworkGroup

Source network group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.32

alaQoSConditionSourceNetworkGroupStatus

Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.33

alaQoSConditionDestinationIpAddr

Destination IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.34

alaQoSConditionDestinationIpAddrStatus

Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.35

alaQoSConditionDestinationIpMask

Destination IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.36

alaQoSConditionDestinationNetworkGroup

Destination network group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.37

alaQoSConditionDestinationNetworkGroupStatus

Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.38

alaQoSConditionMulticastIpAddr

Multicast IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.39

alaQoSConditionMulticastIpAddrStatus

Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.40

alaQoSConditionMulticastIpMask

Multicast IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.41

alaQoSConditionMulticastNetworkGroup

Multicast network group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.42

alaQoSConditionMulticastNetworkGroupStatus

Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.43

alaQoSConditionTos

TOS value to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.44

alaQoSConditionTosStatus

Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.45

alaQoSConditionTosMask

TOS mask to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.46

alaQoSConditionDscp

DSCP value to use for traffic classification

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.47

alaQoSConditionDscpStatus

Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.48

alaQoSConditionDscpMask

DSCP mask to use for traffic classification

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.49

alaQoSConditionIpProtocol

IP protocol to use for traffic classification.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.50

alaQoSConditionIpProtocolStatus

Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.51

alaQoSConditionSourceIpPort

Source IP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.52

alaQoSConditionSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.53

alaQoSConditionDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.54

alaQoSConditionDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.55

alaQoSConditionService

Name of service to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.56

alaQoSConditionServiceStatus

Status field indicating whether the service
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.57

alaQoSConditionServiceGroup

Name of service group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.58

alaQoSConditionServiceGroupStatus

Status field indicating whether the service group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.59

alaQoSConditionIcmpType

ICMP type to use for traffic classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.60

alaQoSConditionIcmpTypeStatus

Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.61

alaQoSConditionIcmpCode

ICMP code to use for traffic classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.62

alaQoSConditionIcmpCodeStatus

Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.63

alaQoSConditionRowStatus

Used to create/delete conditions according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.64

alaQoSConditionSourcePortEnd

Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.65

alaQoSConditionDestinationPortEnd

Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.66

alaQoSConditionSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a
range. When '0', use source IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.67

alaQoSConditionDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.68

alaQoSConditionSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.69

alaQoSConditionSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.70

alaQoSConditionSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.71

alaQoSConditionDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.72

alaQoSConditionDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.73

alaQoSConditionDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.74

alaQoSConditionSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.75

alaQoSConditionSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.76

alaQoSConditionSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate
a range. When '0', use source UDP port as a single UDP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.77

alaQoSConditionDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.78

alaQoSConditionDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.79

alaQoSConditionDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.80

alaQoSConditionEthertype

Ethertype value to use for traffic classification

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.81

alaQoSConditionEthertypeStatus

Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.82

alaQoSConditionTcpFlags

Use any/all specifieid TCP flags for traffic classification

Enumerationr/w

Enumerated Values:

1	all
2	any

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.83

alaQoSConditionTcpFlagsStatus

Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.84

alaQoSConditionTcpFlagsVal

TCP flags values used for traffic classification

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.85

alaQoSConditionTcpFlagsValStatus

Not used

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.86

alaQoSConditionTcpFlagsMask

Mask of TCP flags bits used for traffic classification

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.87

alaQoSConditionTcpFlagsMaskStatus

Not used

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.88

alaQoSConditionTcpEstablished

Look for established TCP sessions in classification

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.89

alaQoSConditionSourceIpv6Addr

Source IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.90

alaQoSConditionSourceIpv6AddrStatus

Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.91

alaQoSConditionSourceIpv6Mask

Source IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.92

alaQoSConditionDestinationIpv6Addr

Destination IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.93

alaQoSConditionDestinationIpv6AddrStatus

Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.94

alaQoSConditionDestinationIpv6Mask

Destination IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.95

alaQoSConditionIpv6Traffic

classify IPV6 traffic

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.96

alaQoSConditionIpv6NH

NH value to use for traffic classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.97

alaQoSConditionIpv6NHStatus

Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.98

alaQoSConditionIpv6FlowLabel

FL value to use for traffic classification

Integer32r/w

Constraints:
range: 0-1048575

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.99

alaQoSConditionIpv6FlowLabelStatus

Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.100

alaQoSConditionMcastIpv6Addr

Multicast IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.101

alaQoSConditionMcastIpv6AddrStatus

Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.102

alaQoSConditionMcastIpv6Mask

Multicast IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.103

alaQoSConditionDscpEnd

DSCP value to use for traffic classification

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.104

alaQoSConditionInnerSourceVlan

Customer VLAN to use for traffic classification

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.105

alaQoSConditionInnerSourceVlanStatus

Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.106

alaQoSConditionInner8021p

Customer 802.1p to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.107

alaQoSConditionInner8021pStatus

Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.108

alaQoSConditionVrfName

Name of Vrf to match traffic in

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.109

alaQoSConditionVrfNameStatus

Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.110

alaQoSConditionFragments

TCP packet fragments

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.111

alaQoSConditionSourceChassis

Source physical chassis used for traffic classification.

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.112

alaQoSConditionDestinationChassis

Destination physical chassis used for traffic classification.

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.113

alaQoSConditionAppFpGroup

Application Fingerprinting group.

OctetStringr/w

Constraints:
range: 1-24

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.114

alaQoSConditionAppFpGroupStatus

Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.115

alaQoSConditionSIP

SIP type to use for traffic classification

Enumerationr/w

Enumerated Values:

1	audio
2	video
3	other

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.116

alaQoSConditionSIPStatus

SIP Status field indicates whether SIP is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.117

alaQoSConditionDPIAppName

DPI Application Name associated with a policy condition.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.118

alaQoSConditionDPIGrpName

DPI Group Name associated with a policy condition.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.119

alaQoSConditionDPIAppNameStatus

DPI Status field indicates whether DPI Application Name is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.120

alaQoSConditionDPIAppGroupStatus

DPI Status field indicates whether DPI Application Group is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.121

alaQoSConditionVxlanVni

Integer32r/w

Constraints:
range: 0-16777215

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.122

alaQoSConditionVxlanVniStatus

Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.123

alaQoSConditionVxlanPort

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.124

alaQoSConditionVxlanPortStatus

Status field indicating whether the VXLAN Port needs
to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.125

alaQoSConditionVmSourceMacAddr

Source MAC address to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.126

alaQoSConditionVmSourceMacAddrStatus

Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.127

alaQoSConditionVmSourceMacMask

Source MAC mask to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.128

alaQoSConditionVmSourceIpAddr

Source IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.129

alaQoSConditionVmSourceIpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.130

alaQoSConditionVmSourceIpMask

Source IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.131

alaQoSConditionVmSourceIpv6IpAddr

Destination IP address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.132

alaQoSConditionVmSourceIpv6IpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.133

alaQoSConditionVmSourceIpv6IpMask

Source IP mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.134

alaQoSConditionVmIpProtocol

IP protocol to use for traffic classification.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.135

alaQoSConditionVmIpProtocolStatus

Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.136

alaQosConditionVmL4SourcePort

Source IP port to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.137

alaQosConditionVmL4SourcePortStatus

Status field indicating whether the source IP port
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.138

alaQosConditionVmL4DestPort

Destination IP port to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.139

alaQosConditionVmL4DestPortStatus

Status field indicating whether the destination port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.140

alaQosConditionVxlanStatus

Status field indicating vxlan configuration.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.141

alaQoSConditionSourcePortSplitGroup

Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.142

alaQoSConditionSourcePortSplitGroupStatus

Status field indicating whether the source physical port splitGroup
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.143

alaQoSAppliedConditionTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4 · 1 row entry · 143 columns

Open in standard view

Table of QoS AppliedCondition definitions

alaQoSAppliedConditionEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1

Definition of QoS AppliedCondition

Indexes

alaQoSAppliedConditionName

Column Syntax OID

alaQoSAppliedConditionName

Name of condition

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.1

alaQoSAppliedConditionSource

What entity created the condition.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.2

alaQoSAppliedConditionSourceSlot

Source physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.3

alaQoSAppliedConditionSourceSlotStatus

Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.4

alaQoSAppliedConditionSourcePort

Source physical port range start to use for
traffic classification

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.5

alaQoSAppliedConditionSourcePortGroup

Source physical port group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.6

alaQoSAppliedConditionSourcePortGroupStatus

Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.7

alaQoSAppliedConditionDestinationSlot

Destination physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.8

alaQoSAppliedConditionDestinationSlotStatus

Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.9

alaQoSAppliedConditionDestinationPort

Destination physical port range start to use for traffic
classification

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.10

alaQoSAppliedConditionDestinationPortGroup

Destination physical port group to use for traffic
classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.11

alaQoSAppliedConditionDestinationPortGroupStatus

Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.12

alaQoSAppliedConditionSourceMacAddr

Source MAC address to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.13

alaQoSAppliedConditionSourceMacAddrStatus

Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.14

alaQoSAppliedConditionSourceMacMask

Source MAC mask to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.15

alaQoSAppliedConditionSourceMacGroup

Source MAC group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.16

alaQoSAppliedConditionSourceMacGroupStatus

Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.17

alaQoSAppliedConditionDestinationMacAddr

Destination MAC address to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.18

alaQoSAppliedConditionDestinationMacAddrStatus

Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.19

alaQoSAppliedConditionDestinationMacMask

Destination MAC mask to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.20

alaQoSAppliedConditionDestinationMacGroup

Destination MAC group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.21

alaQoSAppliedConditionDestinationMacGroupStatus

Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.22

alaQoSAppliedConditionSourceVlan

Source VLAN to use for traffic classification

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.23

alaQoSAppliedConditionSourceVlanStatus

Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.24

alaQoSAppliedConditionDestinationVlan

Destination VLAN to use for traffic classification

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.25

alaQoSAppliedConditionDestinationVlanStatus

Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.26

alaQoSAppliedCondition8021p

802.1p value to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.27

alaQoSAppliedCondition8021pStatus

Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.28

alaQoSAppliedConditionSourceIpAddr

Source IP address to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.29

alaQoSAppliedConditionSourceIpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.30

alaQoSAppliedConditionSourceIpMask

Source IP mask to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.31

alaQoSAppliedConditionSourceNetworkGroup

Source network group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.32

alaQoSAppliedConditionSourceNetworkGroupStatus

Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.33

alaQoSAppliedConditionDestinationIpAddr

Destination IP address to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.34

alaQoSAppliedConditionDestinationIpAddrStatus

Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.35

alaQoSAppliedConditionDestinationIpMask

Destination IP mask to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.36

alaQoSAppliedConditionDestinationNetworkGroup

Destination network group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.37

alaQoSAppliedConditionDestinationNetworkGroupStatus

Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.38

alaQoSAppliedConditionMulticastIpAddr

Multicast IP address to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.39

alaQoSAppliedConditionMulticastIpAddrStatus

Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.40

alaQoSAppliedConditionMulticastIpMask

Multicast IP mask to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.41

alaQoSAppliedConditionMulticastNetworkGroup

Multicast network group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.42

alaQoSAppliedConditionMulticastNetworkGroupStatus

Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.43

alaQoSAppliedConditionTos

TOS value to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.44

alaQoSAppliedConditionTosStatus

Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.45

alaQoSAppliedConditionTosMask

TOS mask to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.46

alaQoSAppliedConditionDscp

DSCP value to use for traffic classification

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.47

alaQoSAppliedConditionDscpStatus

Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.48

alaQoSAppliedConditionDscpMask

DSCP mask to use for traffic classification

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.49

alaQoSAppliedConditionIpProtocol

IP protocol to use for traffic classification.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.50

alaQoSAppliedConditionIpProtocolStatus

Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.51

alaQoSAppliedConditionSourceIpPort

Source IP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.52

alaQoSAppliedConditionSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.53

alaQoSAppliedConditionDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.54

alaQoSAppliedConditionDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.55

alaQoSAppliedConditionService

Name of service to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.56

alaQoSAppliedConditionServiceStatus

Status field indicating whether the service
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.57

alaQoSAppliedConditionServiceGroup

Name of service group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.58

alaQoSAppliedConditionServiceGroupStatus

Status field indicating whether the service group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.59

alaQoSAppliedConditionIcmpType

ICMP type to use for traffic classification

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.60

alaQoSAppliedConditionIcmpTypeStatus

Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.61

alaQoSAppliedConditionIcmpCode

ICMP code to use for traffic classification

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.62

alaQoSAppliedConditionIcmpCodeStatus

Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.63

alaQoSAppliedConditionRowStatus

Used to create/delete conditions according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.64

alaQoSAppliedConditionSourcePortEnd

Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port.

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.65

alaQoSAppliedConditionDestinationPortEnd

Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port.

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.66

alaQoSAppliedConditionSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a
range. When '0', use source IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.67

alaQoSAppliedConditionDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.68

alaQoSAppliedConditionSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.69

alaQoSAppliedConditionSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.70

alaQoSAppliedConditionSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.71

alaQoSAppliedConditionDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.72

alaQoSAppliedConditionDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.73

alaQoSAppliedConditionDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.74

alaQoSAppliedConditionSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.75

alaQoSAppliedConditionSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.76

alaQoSAppliedConditionSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate
a range. When '0', use source UDP port as a single UDP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.77

alaQoSAppliedConditionDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.78

alaQoSAppliedConditionDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.79

alaQoSAppliedConditionDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.80

alaQoSAppliedConditionEthertype

Ethertype value to use for traffic classification

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.81

alaQoSAppliedConditionEthertypeStatus

Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.82

alaQoSAppliedConditionTcpFlags

Use any/all specifieid TCP flags for traffic classification

Enumeration

Enumerated Values:

1	all
2	any

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.83

alaQoSAppliedConditionTcpFlagsStatus

Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.84

alaQoSAppliedConditionTcpFlagsVal

TCP flags values used for traffic classification

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.85

alaQoSAppliedConditionTcpFlagsValStatus

Not used

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.86

alaQoSAppliedConditionTcpFlagsMask

Mask of TCP flags bits used for traffic classification

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.87

alaQoSAppliedConditionTcpFlagsMaskStatus

Not used

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.88

alaQoSAppliedConditionTcpEstablished

Look for established TCP sessions in classification

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.89

alaQoSAppliedConditionSourceIpv6Addr

Source IPv6 address to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.90

alaQoSAppliedConditionSourceIpv6AddrStatus

Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.91

alaQoSAppliedConditionSourceIpv6Mask

Source IPv6 mask to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.92

alaQoSAppliedConditionDestinationIpv6Addr

Destination IPv6 address to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.93

alaQoSAppliedConditionDestinationIpv6AddrStatus

Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.94

alaQoSAppliedConditionDestinationIpv6Mask

Destination IPv6 mask to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.95

alaQoSAppliedConditionIpv6Traffic

classify IPV6 traffic

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.96

alaQoSAppliedConditionIpv6NH

NH value to use for traffic classification

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.97

alaQoSAppliedConditionIpv6NHStatus

Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.98

alaQoSAppliedConditionIpv6FlowLabel

FL value to use for traffic classification

Integer32

Constraints:
range: 0-1048575

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.99

alaQoSAppliedConditionIpv6FlowLabelStatus

Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.100

alaQoSAppliedConditionMcastIpv6Addr

Multicast IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.101

alaQoSAppliedConditionMcastIpv6AddrStatus

Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.102

alaQoSAppliedConditionMcastIpv6Mask

Multicast IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.103

alaQoSAppliedConditionDscpEnd

DSCP value to use for traffic classification

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.104

alaQoSAppliedConditionInnerSourceVlan

Customer VLAN to use for traffic classification

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.105

alaQoSAppliedConditionInnerSourceVlanStatus

Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.106

alaQoSAppliedConditionInner8021p

Customer 802.1p to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.107

alaQoSAppliedConditionInner8021pStatus

Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.108

alaQoSAppliedConditionVrfName

Name of Vrf to match traffic in

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.109

alaQoSAppliedConditionVrfNameStatus

Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.110

alaQoSAppliedConditionFragments

TCP packet fragments

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.111

alaQoSAppliedConditionSourceChassis

Source physical chassis used for traffic classification.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.112

alaQoSAppliedConditionDestinationChassis

Destination physical chassis used for traffic classification.

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.113

alaQoSAppliedConditionAppFpGroup

Application Fingerprinting group.

OctetStringr/w

Constraints:
range: 1-24

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.114

alaQoSAppliedConditionAppFpGroupStatus

Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.115

alaQoSAppliedConditionSIP

SIP type to use for traffic classification

Enumerationr/w

Enumerated Values:

1	audio
2	video
3	other

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.116

alaQoSAppliedConditionSIPStatus

SIP Status field indicates whether SIP is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.117

alaQoSAppliedConditionDPIAppName

DPI Application Member.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.118

alaQoSAppliedConditionDPIAppGrp

DPI Application Member Type.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.119

alaQoSAppliedConditionDPIAppNameStatus

DPI Status field indicates whether DPI Application name is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.120

alaQoSAppliedConditionDPIAppGroupStatus

DPI Status field indicates whether DPI Application group is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.121

alaQoSAppliedConditionVxlanVni

Vni value associated with this vxlan

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.122

alaQoSAppliedConditionVxlanVniStatus

Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.123

alaQoSAppliedConditionVxlanPort

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.124

alaQoSAppliedConditionVxlanPortStatus

Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.125

alaQoSAppliedConditionVmSourceMacAddr

Source MAC address to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.126

alaQoSAppliedConditionVmSourceMacAddrStatus

Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.127

alaQoSAppliedConditionVmSourceMacMask

Source MAC address to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.128

alaQoSAppliedConditionVmSourceIpAddr

Source IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.129

alaQoSAppliedConditionVmSourceIpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.130

alaQoSAppliedConditionVmSourceIpMask

Source IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.131

alaQoSAppliedConditionVmSourceIpv6IpAddr

Source IPV6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.132

alaQoSAppliedConditionVmSourceIpv6IpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.133

alaQoSAppliedConditionVmSourceIpv6IpMask

Source IPV6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.134

alaQoSAppliedConditionVmIpProtocol

IP protocol to use for traffic classification.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.135

alaQoSAppliedConditionVmIpProtocolStatus

Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.136

alaQosAppliedConditionVmL4SourcePort

Source IP port to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.137

alaQosAppliedConditionVmL4SourcePortStatus

Status field indicating whether the source port
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.138

alaQosAppliedConditionVmL4DestPort

Destination port to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.139

alaQosAppliedConditionVmL4DestPortStatus

Status field indicating whether the destination port
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.140

alaQosAppliedConditionVxlanStatus

Status field indicating vxlan configuration.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.141

alaQoSAppliedConditionSourcePortSplitGroup

Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.142

alaQoSAppliedConditionSourcePortSplitGroupStatus

Status field indicating whether the source physical port splitGroup
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.143

alaQoSServiceTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5 · 1 row entry · 22 columns

Open in standard view

Table of QoS Service definitions

alaQoSServiceEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1

Definition of QoS Service

Indexes

alaQoSServiceName

Column Syntax OID

alaQoSServiceName

Name of the service

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.1

alaQoSServiceSource

What entity created the service.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.2

alaQoSServiceProtocol

protocol field for Service

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.3

alaQoSServiceSourceIpPort

Source IP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.4

alaQoSServiceSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.5

alaQoSServiceDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.6

alaQoSServiceDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.7

alaQoSServiceRowStatus

Used to create/delete services according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.8

alaQoSServiceSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate
a range. When '0', use source IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.9

alaQoSServiceDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.10

alaQoSServiceSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.11

alaQoSServiceSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.12

alaQoSServiceSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.13

alaQoSServiceDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.14

alaQoSServiceDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.15

alaQoSServiceDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port as
a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.16

alaQoSServiceSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.17

alaQoSServiceSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.18

alaQoSServiceSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a
range. When '0', use source UDP port as a single UDP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.19

alaQoSServiceDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.20

alaQoSServiceDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.21

alaQoSServiceDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port as
a single UDP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.22

alaQoSAppliedServiceTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6 · 1 row entry · 22 columns

Open in standard view

Table of QoS AppliedService definitions

alaQoSAppliedServiceEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1

Definition of QoS AppliedService

Indexes

alaQoSAppliedServiceName

Column Syntax OID

alaQoSAppliedServiceName

Name of the service

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.1

alaQoSAppliedServiceSource

What entity created the service.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.2

alaQoSAppliedServiceProtocol

protocol field for AppliedService

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.3

alaQoSAppliedServiceSourceIpPort

Source IP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.4

alaQoSAppliedServiceSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.5

alaQoSAppliedServiceDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.6

alaQoSAppliedServiceDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.7

alaQoSAppliedServiceRowStatus

Used to create/delete services according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.8

alaQoSAppliedServiceSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate
a range. When '0', use source IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.9

alaQoSAppliedServiceDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.10

alaQoSAppliedServiceSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.11

alaQoSAppliedServiceSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.12

alaQoSAppliedServiceSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.13

alaQoSAppliedServiceDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.14

alaQoSAppliedServiceDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.15

alaQoSAppliedServiceDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port as
a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.16

alaQoSAppliedServiceSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.17

alaQoSAppliedServiceSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.18

alaQoSAppliedServiceSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a
range. When '0', use source UDP port as a single UDP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.19

alaQoSAppliedServiceDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.20

alaQoSAppliedServiceDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.21

alaQoSAppliedServiceDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port as
a single UDP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.22

alaQoSServiceGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7 · 1 row entry · 3 columns

Open in standard view

Table of QoS ServiceGroups definitions

alaQoSServiceGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1

Definition of QoS ServiceGroups

Indexes

alaQoSServiceGroupsName

Column Syntax OID

alaQoSServiceGroupsName

Name of service group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.1

alaQoSServiceGroupsSource

What entity created the service group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.2

alaQoSServiceGroupsStatus

Used to create/delete service groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.3

alaQoSAppliedServiceGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedServiceGroups definitions

alaQoSAppliedServiceGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1

Definition of QoS AppliedServiceGroups

Indexes

alaQoSAppliedServiceGroupsName

Column Syntax OID

alaQoSAppliedServiceGroupsName

Name of service group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.1

alaQoSAppliedServiceGroupsSource

What entity created the service group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.2

alaQoSAppliedServiceGroupsStatus

Used to create/delete service groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.3

alaQoSServiceGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9 · 1 row entry · 2 columns

Open in standard view

Table of QoS ServiceGroup definitions

alaQoSServiceGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1

Definition of QoS ServiceGroup

Indexes

alaQoSServiceGroupsName alaQoSServiceGroupServiceName

Column Syntax OID

alaQoSServiceGroupServiceName

Name of service in service group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.1

alaQoSServiceGroupStatus

Used to create/delete service group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.2

alaQoSAppliedServiceGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10 · 1 row entry · 2 columns

Open in standard view

Table of QoS AppliedServiceGroup definitions

alaQoSAppliedServiceGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1

Definition of QoS AppliedServiceGroup

Indexes

alaQoSAppliedServiceGroupsName alaQoSAppliedServiceGroupServiceName

Column Syntax OID

alaQoSAppliedServiceGroupServiceName

Name of service in service group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.1

alaQoSAppliedServiceGroupStatus

Used to create/delete service group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.2

alaQoSNetworkGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11 · 1 row entry · 3 columns

Open in standard view

Table of QoS NetworkGroups definitions

alaQoSNetworkGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1

Definition of QoS NetworkGroups

Indexes

alaQoSNetworkGroupsName

Column Syntax OID

alaQoSNetworkGroupsName

Name of network group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.1

alaQoSNetworkGroupsSource

What entity created the network group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.2

alaQoSNetworkGroupsStatus

Used to create/delete network groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.3

alaQoSAppliedNetworkGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedNetworkGroups definitions

alaQoSAppliedNetworkGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1

Definition of QoS AppliedNetworkGroups

Indexes

alaQoSAppliedNetworkGroupsName

Column Syntax OID

alaQoSAppliedNetworkGroupsName

Name of network group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.1

alaQoSAppliedNetworkGroupsSource

What entity created the network group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.2

alaQoSAppliedNetworkGroupsStatus

Used to create/delete network groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.3

alaQoSNetworkGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13 · 1 row entry · 3 columns

Open in standard view

Table of QoS NetworkGroup definitions

alaQoSNetworkGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1

Definition of QoS NetworkGroup

Indexes

alaQoSNetworkGroupsName alaQoSNetworkGroupIpAddr alaQoSNetworkGroupIpMask

Column Syntax OID

alaQoSNetworkGroupIpAddr

IP address for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.1

alaQoSNetworkGroupIpMask

IP mask for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.2

alaQoSNetworkGroupStatus

Used to create/delete network group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.3

alaQoSAppliedNetworkGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedNetworkGroup definitions

alaQoSAppliedNetworkGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1

Definition of QoS AppliedNetworkGroup

Indexes

alaQoSAppliedNetworkGroupsName alaQoSAppliedNetworkGroupIpAddr alaQoSAppliedNetworkGroupIpMask

Column Syntax OID

alaQoSAppliedNetworkGroupIpAddr

IP address for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.1

alaQoSAppliedNetworkGroupIpMask

IP mask for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.2

alaQoSAppliedNetworkGroupStatus

Used to create/delete network group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.3

alaQoSMACGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15 · 1 row entry · 3 columns

Open in standard view

Table of QoS MACGroups definitions

alaQoSMACGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1

Definition of QoS MACGroups

Indexes

alaQoSMACGroupsName

Column Syntax OID

alaQoSMACGroupsName

Name of MAC group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.1

alaQoSMACGroupsSource

What entity created the MAC group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.2

alaQoSMACGroupsStatus

Used to create/delete MAC groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.3

alaQoSAppliedMACGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedMACGroups definitions

alaQoSAppliedMACGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1

Definition of QoS AppliedMACGroups

Indexes

alaQoSAppliedMACGroupsName

Column Syntax OID

alaQoSAppliedMACGroupsName

Name of MAC group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.1

alaQoSAppliedMACGroupsSource

What entity created the MAC group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.2

alaQoSAppliedMACGroupsStatus

Used to create/delete MAC groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.3

alaQoSMACGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17 · 1 row entry · 3 columns

Open in standard view

Table of QoS MACGroup definitions

alaQoSMACGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1

Definition of QoS MACGroup

Indexes

alaQoSMACGroupsName alaQoSMACGroupMacAddr alaQoSMACGroupMacMask

Column Syntax OID

alaQoSMACGroupMacAddr

MAC address for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.1

alaQoSMACGroupMacMask

MAC mask for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.2

alaQoSMACGroupStatus

Used to create/delete MAC group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.3

alaQoSAppliedMACGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedMACGroup definitions

alaQoSAppliedMACGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1

Definition of QoS AppliedMACGroup

Indexes

alaQoSAppliedMACGroupsName alaQoSAppliedMACGroupMacAddr alaQoSAppliedMACGroupMacMask

Column Syntax OID

alaQoSAppliedMACGroupMacAddr

MAC address for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.1

alaQoSAppliedMACGroupMacMask

MAC mask for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.2

alaQoSAppliedMACGroupStatus

Used to create/delete MAC group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.3

alaQoSPortGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19 · 1 row entry · 3 columns

Open in standard view

Table of QoS PortGroups definitions

alaQoSPortGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1

Definition of QoS PortGroups

Indexes

alaQoSPortGroupsName

Column Syntax OID

alaQoSPortGroupsName

Name of port group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.1

alaQoSPortGroupsSource

What entity created the port group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.2

alaQoSPortGroupsStatus

Used to create/delete port groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.3

alaQoSAppliedPortGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedPortGroups definitions

alaQoSAppliedPortGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1

Definition of QoS AppliedPortGroups

Indexes

alaQoSAppliedPortGroupsName

Column Syntax OID

alaQoSAppliedPortGroupsName

Name of port group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.1

alaQoSAppliedPortGroupsSource

What entity created the port group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.2

alaQoSAppliedPortGroupsStatus

Used to create/delete port groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.3

alaQoSPortGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21 · 1 row entry · 4 columns

Open in standard view

Table of QoS PortGroup definitions

alaQoSPortGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1

Definition of QoS PortGroup

Indexes

alaQoSPortGroupsName alaQoSPortGroupSlot alaQoSPortGroupPort alaQoSPortGroupPortEnd

Column Syntax OID

alaQoSPortGroupSlot

Physical slot for port group entry.
If this is a virtual chassis environemnt,
This will contain the ChassisId*1000 + slotNum.

Integer32

Constraints:
range: 0-6016

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.1

alaQoSPortGroupPort

Physical port range start for port group entry

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.2

alaQoSPortGroupStatus

Used to create/delete port group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.3

alaQoSPortGroupPortEnd

Physical port range end for port group entry
Must be greater than port range start to indicate a range.
When '1', use port as a single port.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.4

alaQoSAppliedPortGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22 · 1 row entry · 4 columns

Open in standard view

Table of QoS AppliedPortGroup definitions

alaQoSAppliedPortGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1

Definition of QoS AppliedPortGroup

Indexes

alaQoSAppliedPortGroupsName alaQoSAppliedPortGroupSlot alaQoSAppliedPortGroupPort alaQoSAppliedPortGroupPortEnd

Column Syntax OID

alaQoSAppliedPortGroupSlot

Physical slot for port group entry
If this is a virtual chassis environemnt,
This will contain the ChassisId*1000 + slotNum.

Integer32

Constraints:
range: 1-6016

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.1

alaQoSAppliedPortGroupPort

Physical port range start for port group entry

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.2

alaQoSAppliedPortGroupStatus

Used to create/delete port group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.3

alaQoSAppliedPortGroupPortEnd

Physical port range end for port group entry
Must be greater than port range start to indicate a range.
When '1', use port as a single port.

Integer32

Constraints:
range: 0-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.4

alaQoSMapGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23 · 1 row entry · 3 columns

Open in standard view

Table of QoS MapGroups definitions

alaQoSMapGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1

Definition of QoS MapGroups

Indexes

alaQoSMapGroupsName

Column Syntax OID

alaQoSMapGroupsName

Name of map group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.1

alaQoSMapGroupsSource

What entity created the map group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.2

alaQoSMapGroupsStatus

Used to create/delete map groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.3

alaQoSAppliedMapGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedMapGroups definitions

alaQoSAppliedMapGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1

Definition of QoS AppliedMapGroups

Indexes

alaQoSAppliedMapGroupsName

Column Syntax OID

alaQoSAppliedMapGroupsName

Name of map group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.1

alaQoSAppliedMapGroupsSource

What entity created the map group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.2

alaQoSAppliedMapGroupsStatus

Used to create/delete map groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.3

alaQoSMapGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25 · 1 row entry · 4 columns

Open in standard view

Table of QoS MapGroup definitions

alaQoSMapGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1

Definition of QoS MapGroup

Indexes

alaQoSMapGroupsName alaQoSMapGroupKey alaQoSMapGroupKeyEnd alaQoSMapGroupValue

Column Syntax OID

alaQoSMapGroupKey

Key range start of map group entry.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.1

alaQoSMapGroupKeyEnd

Key range end for map group entries. Key range end
must be greater than key range start to indicate a range.
When '0', use key range start as a single key.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.2

alaQoSMapGroupValue

Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.3

alaQoSMapGroupStatus

Used to create/delete map group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.4

alaQoSAppliedMapGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26 · 1 row entry · 4 columns

Open in standard view

Table of QoS AppliedMapGroup definitions

alaQoSAppliedMapGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1

Definition of QoS AppliedMapGroup

Indexes

alaQoSAppliedMapGroupsName alaQoSAppliedMapGroupKey alaQoSAppliedMapGroupKeyEnd alaQoSAppliedMapGroupValue

Column Syntax OID

alaQoSAppliedMapGroupKey

Key range start of map group entry.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.1

alaQoSAppliedMapGroupKeyEnd

Key range end for map group entries. Key range end
must be greater than key range start to indicate a range.
When '0', use key range start as a single key.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.2

alaQoSAppliedMapGroupValue

Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.3

alaQoSAppliedMapGroupStatus

Used to create/delete map group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.4

alaQoSActionTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27 · 1 row entry · 61 columns

Open in standard view

Table of QoS Action definitions

alaQoSActionEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1

Definition of QoS Action

Indexes

alaQoSActionName

Column Syntax OID

alaQoSActionName

Name of action

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.1

alaQoSActionSource

What entity created the action.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.2

alaQoSActionDisposition

Disposition of traffic using the action.
Use to filter out unwanted traffic.

Enumerationr/w

Enumerated Values:

1	accept
2	drop
3	deny

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.3

alaQoSActionMaximumBandwidth

Maximum bandwidth (Kbits/sec) allowed for traffic

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.4

alaQoSActionMaximumBandwidthStatus

Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.5

alaQoSActionPriority

Internal and queueing priority to use for traffic.

Integer32r/w

Constraints:
range: 0-12

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.6

alaQoSActionPriorityStatus

Status field indicating whether priority
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.7

alaQoSActionShared

When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.8

alaQoSActionMaximumDepth

Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.9

alaQoSActionMaximumDepthStatus

Status field indicating whether maximum depth
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.10

alaQoSAction8021p

802.1p value to stamp on traffic.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.11

alaQoSAction8021pStatus

Status field indicating whether 802.1p
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.12

alaQoSActionTos

TOS value to stamp on traffic. (High 3 bits of TOS byte)

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.13

alaQoSActionTosStatus

Status field indicating whether TOS
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.14

alaQoSActionDscp

TOS value to stamp on traffic. (High 6 bits of TOS byte)

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.15

alaQoSActionDscpStatus

Status field indicating whether DSCP
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.16

alaQoSActionMapFrom

What field to use as key for mapping 802.1p/TOS/DSCP priorities

Enumerationr/w

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.17

alaQoSActionMapTo

What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities

Enumerationr/w

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.18

alaQoSActionMapGroup

Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.19

alaQoSActionMapGroupStatus

Status field indicating whether a map group
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.20

alaQoSActionLoadBalanceGroup

Name of load balance group to use for traffic

OctetStringr/w

Constraints:
range: 0-23

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.21

alaQoSActionLoadBalanceGroupStatus

Status field indicating whether load balanace group
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.22

alaQoSActionPermanentGatewayIpAddr

Next hop gateway to use for traffic

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.23

alaQoSActionPermanentGatewayIpAddrStatus

Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.24

alaQoSActionAlternateGatewayIpAddr

Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.25

alaQoSActionAlternateGatewayIpAddrStatus

Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.26

alaQoSActionRowStatus

Used to create/delete actions according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.27

alaQoSActionNocache

When enabled, don't make hardware entries for matching flows.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.28

alaQoSActionPortdisable

When enabled, disable the physical source port of the traffic.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.29

alaQoSActionRedirectSlot

Destination physical slot for redirected traffic

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.30

alaQoSActionRedirectSlotStatus

Status for alaQoSActionRedirectSlotStatus field

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.31

alaQoSActionRedirectPort

Destination physical port for redirected traffic

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.32

alaQoSActionRedirectAgg

Destination linkagg for redirected traffic

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.33

alaQoSActionRedirectAggStatus

Status for alaQoSActionRedirectAggStatus field

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.34

alaQoSActionMirrorSlot

Destination physical slot for mirrored traffic

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.35

alaQoSActionMirrorPort

Destination physical port for mirrored traffic

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.36

alaQoSActionMirrorMode

Mirroring mode

Enumerationr/w

Enumerated Values:

1	ingress
2	egress
3	both

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.37

alaQoSActionMirrorModeStatus

Status for alaQoSActionMirrorMode field

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.38

alaQoSActionCIR

Committed Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.39

alaQoSActionCIRStatus

Status field indicating whether CIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.40

alaQoSActionCBS

Committed Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.41

alaQoSActionCBSStatus

Status field indicating whether CBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.42

alaQoSActionPIR

Peak Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.43

alaQoSActionPIRStatus

Status field indicating whether PIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.44

alaQoSActionPBS

Peak Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.45

alaQoSActionPBSStatus

Status field indicating whether PBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.46

alaQoSActionCPUPriority

Priority for CPU messages.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.47

alaQoSActionCPUPriorityStatus

Status field indicating whether CPU Priority value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.48

alaQoSActionColorOnly

only color red traffic

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.49

alaQoSActionRedirectChassis

Destination physical chassis for redirected traffic

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.50

alaQoSActionMirrorChassis

Destination physical chassis for mirrored traffic

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.51

alaQoSActionPermanentGatewayIpV6Addr

Next hop gateway to use for IPv6 traffic

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.52

alaQoSActionPermanentGatewayIpV6AddrStatus

Status field indicating whether permanent gateway IPv6 address
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.53

alaQoSActionPermanentGatewayIpV6IfIndex

Ipv6IfIndex for link-local address, else 0.

IPV6-TCIpv6IfIndexOrZeror/w

Textual Convention: IPV6-TCIpv6IfIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.54

alaQoSActionRTCPMonitor

RTCP Monitor status for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.55

alaQoSActionRTCPMonitorStatus

Status of the RTCP Monitor field for the traffic.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.56

alaQoSActionRTCPDSCP

RTCP DSCP number for the traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.57

alaQoSActionRTCPDSCPStatus

Status of the RTCP DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.58

alaQoSActionTrustDSCP

Trust DSCP status for the traffic.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.59

alaQoSActionTrustDSCPStatus

Status of the Trust DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.60

alaQoSActionRedirectModule

Object to configure action on HTTP port for Access-Guardian
Restricted Role configuration.

Enumerationr/w

Enumerated Values:

0	none
1	qmr
2	captivePortal
3	unauthorized
4	byod

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.61

alaQoSAppliedActionTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28 · 1 row entry · 60 columns

Open in standard view

Table of QoS AppliedAction definitions

alaQoSAppliedActionEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1

Definition of QoS AppliedAction

Indexes

alaQoSAppliedActionName

Column Syntax OID

alaQoSAppliedActionName

Name of action

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.1

alaQoSAppliedActionSource

What entity created the action.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.2

alaQoSAppliedActionDisposition

Disposition of traffic using the action.
Use to filter out unwanted traffic.

Enumeration

Enumerated Values:

1	accept
2	drop
3	deny

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.3

alaQoSAppliedActionMaximumBandwidth

Maximum bandwidth (Kbits/sec) allowed for traffic

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.4

alaQoSAppliedActionMaximumBandwidthStatus

Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.5

alaQoSAppliedActionPriority

Internal and queueing priority to use for traffic.

Integer32

Constraints:
range: 0-12

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.6

alaQoSAppliedActionPriorityStatus

Status field indicating whether priority
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.7

alaQoSAppliedActionShared

When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.8

alaQoSAppliedActionMaximumDepth

Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.9

alaQoSAppliedActionMaximumDepthStatus

Status field indicating whether maximum depth
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.10

alaQoSAppliedAction8021p

802.1p value to stamp on traffic.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.11

alaQoSAppliedAction8021pStatus

Status field indicating whether 802.1p
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.12

alaQoSAppliedActionTos

TOS value to stamp on traffic. (High 3 bits of TOS byte)

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.13

alaQoSAppliedActionTosStatus

Status field indicating whether TOS
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.14

alaQoSAppliedActionDscp

TOS value to stamp on traffic. (High 6 bits of TOS byte)

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.15

alaQoSAppliedActionDscpStatus

Status field indicating whether DSCP
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.16

alaQoSAppliedActionMapFrom

What field to use as key for mapping 802.1p/TOS/DSCP priorities

Enumeration

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.17

alaQoSAppliedActionMapTo

What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities

Enumeration

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.18

alaQoSAppliedActionMapGroup

Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.19

alaQoSAppliedActionMapGroupStatus

Status field indicating whether a map group
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.20

alaQoSAppliedActionLoadBalanceGroup

Name of load balance group to use for traffic

OctetString

Constraints:
range: 0-23

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.21

alaQoSAppliedActionLoadBalanceGroupStatus

Status field indicating whether load balanace group
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.22

alaQoSAppliedActionPermanentGatewayIpAddr

Next hop gateway to use for traffic

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.23

alaQoSAppliedActionPermanentGatewayIpAddrStatus

Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.24

alaQoSAppliedActionAlternateGatewayIpAddr

Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.25

alaQoSAppliedActionAlternateGatewayIpAddrStatus

Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.26

alaQoSAppliedActionRowStatus

Used to create/delete actions according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.27

alaQoSAppliedActionNocache

When enabled, don't make hardware entries for matching flows.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.28

alaQoSAppliedActionPortdisable

When enabled, disable the physical source port of the traffic.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.29

alaQoSAppliedActionRedirectSlot

Destination physical slot for redirected traffic

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.30

alaQoSAppliedActionRedirectSlotStatus

Status for alaQoSAppliedActionRedirectSlotStatus field

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.31

alaQoSAppliedActionRedirectPort

Destination physical port for redirected traffic

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.32

alaQoSAppliedActionRedirectAgg

Destination linkagg for redirected traffic

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.33

alaQoSAppliedActionRedirectAggStatus

Status for alaQoSAppliedActionRedirectAggStatus field

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.34

alaQoSAppliedActionMirrorSlot

Destination physical slot for mirrored traffic

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.35

alaQoSAppliedActionMirrorPort

Destination physical port for mirrored traffic

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.36

alaQoSAppliedActionMirrorMode

Mirroring mode

Enumeration

Enumerated Values:

1	ingress
2	egress
3	both

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.37

alaQoSAppliedActionMirrorModeStatus

Status for alaQoSAppliedActionMirrorMode field

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.38

alaQoSAppliedActionCIR

Committed Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.39

alaQoSAppliedActionCIRStatus

Status field indicating whether CIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.40

alaQoSAppliedActionCBS

Committed Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.41

alaQoSAppliedActionCBSStatus

Status field indicating whether CBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.42

alaQoSAppliedActionPIR

Peak Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.43

alaQoSAppliedActionPIRStatus

Status field indicating whether PIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.44

alaQoSAppliedActionPBS

Peak Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.45

alaQoSAppliedActionPBSStatus

Status field indicating whether PBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.46

alaQoSAppliedActionCPUPriority

Priority for CPU messages.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.47

alaQoSAppliedActionCPUPriorityStatus

Status field indicating whether CPU Priority value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.48

alaQoSAppliedActionColorOnly

only color red traffic

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.49

alaQoSAppliedActionRedirectChassis

Destination physical chassis for redirected traffic

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.50

alaQoSAppliedActionMirrorChassis

Destination physical chassis for mirrored traffic

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.51

alaQoSAppliedActionPermanentGatewayIpV6Addr

Next hop gateway to use for IPv6 traffic

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.52

alaQoSAppliedActionPermanentGatewayIpV6AddrStatus

Status field indicating whether permanent gateway IPv6 address
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.53

alaQoSAppliedActionPermanentGatewayIpV6IfIndex

Ipv6IfIndex for link-local address, else 0.

IPV6-TCIpv6IfIndexOrZeror/w

Textual Convention: IPV6-TCIpv6IfIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.54

alaQoSAppliedActionRTCPMonitor

RTCP Monitor status for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.55

alaQoSAppliedActionRTCPMonitorStatus

Status of the RTCP Monitor field for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.56

alaQoSAppliedActionRTCPDSCP

RTCP DSCP number for the traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.57

alaQoSAppliedActionRTCPDSCPStatus

Status of the RTCP DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.58

alaQoSAppliedActionTrustDSCP

Trust DSCP status for the traffic.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.59

alaQoSAppliedActionTrustDSCPStatus

Status of the Trust DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.60

alaQoSPortTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29 · 1 row entry · 20 columns

Open in standard view

Table of QoS Port definitions

alaQoSPortEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1

Definition of QoS Port

Indexes

alaQoSPortSlot alaQoSPortPort

Column Syntax OID

alaQoSPortSlot

Physical slot port resides on
If this is a virtual chassis environemnt,
This will contain the ChassisId*1000 + slotNum.

Integer32

Constraints:
range: 0-6016

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.1

alaQoSPortPort

Physical port number

Integer32

Constraints:
range: 0-52

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.2

alaQoSPortInterfaceType

The type of interface QoS matches for this physical port

Enumeration

Enumerated Values:

1	ethernet
2	wan
3	ethernet10
4	ethernet100
5	ethernet1G
6	ethernet10G
7	aggregate
8	ethernet40G
9	ethernet100G

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.3

alaQoSPortTrusted

Status of trusting 802.1p/TOS/DSCP values.
When trusted, 802.1p/DSCP values in the packet are passed
through the switch. When untrusted, 802.1p/DSCP values are set
to the port defaults.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.4

alaQoSPortDefault8021p

802.1p priority value to use for untagged frames arriving on
the port and tagged frames when the port is untrusted.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.5

alaQoSPortDefaultDSCP

DSCP value to stamp in frames arriving on the port when the port
is untrusted

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.6

alaQoSPortMaximumDefaultDepth

Maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.7

alaQoSPortMaximumDefaultDepthStatus

Status field indicating whether to enforce
maximum depth on this port

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.8

alaQoSPortReset

Reset all QoS parameters to default values

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.9

alaQoSPortPhysicalBandwidth

Physical bandwidth of port (Kbit/sec)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.10

alaQoSPortRowStatus

Used to create/delete ports according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.11

alaQoSPortDefaultClassification

Ingress traffic classification parameter for Firenze port
What field to interpret as priority for WRED

Enumerationr/w

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.12

alaQoSPortMaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this port

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.13

alaQoSPortMaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.14

alaQoSPortMaximumIngBandwidth

Maximum igress bandwidth (Kbits/sec).
Maximum rate to recieve traffic in on this port

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.15

alaQoSPortMaximumIngBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.16

alaQoSPortMaximumIngressDepth

Maximum depth of ingress queues (Kbytes).
Maximum depth of queues on this port

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.17

alaQoSPortMaximumIngressDepthStatus

Status field indicating whether to enforce
maximum depth on this port

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.18

alaQoSPortDEIMarking

This object specifies if, in egress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).

enabled(1) -- the DEI/CFI bit will be set in egress …

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.19

alaQoSPortDEIMapping

This object specifies if, in ingress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).

enabled(1) -- the DEI/CFI bit will be set in ingres…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.20

alaQoSValidityPeriodTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32 · 1 row entry · 13 columns

Open in standard view

Table of QoS ValidityPeriod definitions

alaQoSValidityPeriodEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1

Definition of QoS ValidityPeriod

Indexes

alaQoSValidityPeriodName

Column Syntax OID

alaQoSValidityPeriodName

Name of validity period

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.1

alaQoSValidityPeriodSource

What entity created the validity period.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.2

alaQoSValidityPeriodDays

Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday
is most significant.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.3

alaQoSValidityPeriodDaysStatus

Status field indicating whether the validity period
has specific active days of the month.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.4

alaQoSValidityPeriodMonths

Bitfield for each month this validity period
is active. January is least significant. Decemeber
is most significant.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.5

alaQoSValidityPeriodMonthsStatus

Status field indicating whether the validity period
has specific active days of the week.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.6

alaQoSValidityPeriodHour

Time of day this period becomes active.
Format is 'hh:mm'

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.7

alaQoSValidityPeriodHourStatus

Status field indicating whether the validity period
has specific active hours of the day.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.8

alaQoSValidityPeriodEndHour

Time of day this period becomes inactive.
Format is 'hh:mm'

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.9

alaQoSValidityPeriodInterval

Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm'

OctetStringr/w

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.10

alaQoSValidityPeriodIntervalStatus

Status field indicating whether the validity period
has a specific active date-time interval.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.11

alaQoSValidityPeriodEndInterval

Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm'

OctetStringr/w

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.12

alaQoSValidityPeriodRowStatus

Used to create/delete validity periods according
to the RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.13

alaQoSAppliedValidityPeriodTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33 · 1 row entry · 13 columns

Open in standard view

Table of QoS AppliedValidityPeriod definitions

alaQoSAppliedValidityPeriodEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1

Definition of QoS AppliedValidityPeriod

Indexes

alaQoSAppliedValidityPeriodName

Column Syntax OID

alaQoSAppliedValidityPeriodName

Name of validity period

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.1

alaQoSAppliedValidityPeriodSource

What entity created the validity period.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.2

alaQoSAppliedValidityPeriodDays

Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday
is most significant.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.3

alaQoSAppliedValidityPeriodDaysStatus

Status field indicating whether the validity period
has specific active days of the month.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.4

alaQoSAppliedValidityPeriodMonths

Bitfield for each month this validity period
is active. January is least significant. Decemeber
is most significant.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.5

alaQoSAppliedValidityPeriodMonthsStatus

Status field indicating whether the validity period
has specific active days of the week.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.6

alaQoSAppliedValidityPeriodHour

Time of day this period becomes active.
Format is 'hh:mm'

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.7

alaQoSAppliedValidityPeriodHourStatus

Status field indicating whether the validity period
has specific active hours of the day.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.8

alaQoSAppliedValidityPeriodEndHour

Time of day this period becomes inactive.
Format is 'hh:mm'

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.9

alaQoSAppliedValidityPeriodInterval

Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm'

OctetString

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.10

alaQoSAppliedValidityPeriodIntervalStatus

Status field indicating whether the validity period
has a specific active date-time interval.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.11

alaQoSAppliedValidityPeriodEndInterval

Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm'

OctetString

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.12

alaQoSAppliedValidityPeriodRowStatus

Used to create/delete validity periods according
to the RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.13

alaQoSRuleGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34 · 1 row entry · 5 columns

Open in standard view

Table of QoS RuleGroups definitions

alaQoSRuleGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1

Definition of QoS RuleGroups

Indexes

alaQoSRuleGroupsName

Column Syntax OID

alaQoSRuleGroupsName

Name of rule group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.1

alaQoSRuleGroupsSource

What entity created the rule group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.2

alaQoSRuleGroupsType

Type of rule group.

Enumerationr/w

Enumerated Values:

1	default
2	egress
3	unp
4	appfp
5	empacl

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.3

alaQoSRuleGroupsEnabled

Is this rule grop enabled or not

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.4

alaQoSRuleGroupsStatus

Used to create/delete rule groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.5

alaQoSAppliedRuleGroupsTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35 · 1 row entry · 5 columns

Open in standard view

Table of QoS AppliedRuleGroups definitions

alaQoSAppliedRuleGroupsEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1

Definition of QoS AppliedRuleGroups

Indexes

alaQoSAppliedRuleGroupsName

Column Syntax OID

alaQoSAppliedRuleGroupsName

Name of rule group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.1

alaQoSAppliedRuleGroupsSource

What entity created the service group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.2

alaQoSAppliedRuleGroupsType

What entity created the rule group.

Enumeration

Enumerated Values:

1	default
2	egress
3	unp
4	appfp

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.3

alaQoSAppliedRuleGroupsEnabled

Is this rule grop enabled or not

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.4

alaQoSAppliedRuleGroupsStatus

Used to create/delete rule groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.5

alaQoSRuleGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36 · 1 row entry · 6 columns

Open in standard view

Table of QoS RuleGroup definitions

alaQoSRuleGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1

Definition of QoS RuleGroup

Indexes

alaQoSRuleGroupsName alaQoSRuleGroupRuleName

Column Syntax OID

alaQoSRuleGroupRuleName

Name of rule in rule group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.1

alaQoSRuleGroupMatches

Number of times this rule has been matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.2

alaQoSRuleGroupCountType

Which rule statistics counters to update if not all are available

Enumerationr/w

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.3

alaQoSRuleGroupPacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.4

alaQoSRuleGroupByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.5

alaQoSRuleGroupStatus

Used to create/delete rule group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.6

alaQoSAppliedRuleGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37 · 1 row entry · 6 columns

Open in standard view

Table of QoS AppliedRuleGroup definitions

alaQoSAppliedRuleGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1

Definition of QoS AppliedRuleGroup

Indexes

alaQoSAppliedRuleGroupsName alaQoSAppliedRuleGroupRuleName

Column Syntax OID

alaQoSAppliedRuleGroupRuleName

Name of rule in rule group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.1

alaQoSAppliedRuleGroupMatches

Number of times this rule has been matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.2

alaQoSAppliedRuleGroupCountType

Which rule statistics counters to update if not all are available

Enumerationr/w

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.3

alaQoSAppliedRuleGroupPacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.4

alaQoSAppliedRuleGroupByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.5

alaQoSAppliedRuleGroupStatus

Used to create/delete rule group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.6

alaQoSV6NetworkGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40 · 1 row entry · 3 columns

Open in standard view

Table of QoS V6NetworkGroup definitions

alaQoSV6NetworkGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1

Definition of QoS NetworkGroup

Indexes

alaQoSNetworkGroupsName alaQoSV6NetworkGroupIpAddr alaQoSV6NetworkGroupIpMask

Column Syntax OID

alaQoSV6NetworkGroupIpAddr

IP address for network group entry.

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.1

alaQoSV6NetworkGroupIpMask

IP mask for network group entry.

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.2

alaQoSV6NetworkGroupStatus

Used to create/delete network group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.3

alaQoSAppliedV6NetworkGroupTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedNetworkGroup definitions

alaQoSAppliedV6NetworkGroupEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1

Definition of QoS AppliedNetworkGroup

Indexes

alaQoSAppliedNetworkGroupsName alaQoSAppliedV6NetworkGroupIpAddr alaQoSAppliedV6NetworkGroupIpMask

Column Syntax OID

alaQoSAppliedV6NetworkGroupIpAddr

IP address for network group entry.

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.1

alaQoSAppliedV6NetworkGroupIpMask

IP mask for network group entry.

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.2

alaQoSAppliedV6NetworkGroupStatus

Used to create/delete network group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.3

alaQoSDSCPTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55 · 1 row entry · 4 columns

Open in standard view

Table of QoS Condition definitions

alaQoSDSCPEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1

Definition of QoS DSCP

Indexes

alaQoSDSCPEntryNumber

Column Syntax OID

alaQoSDSCPEntryNumber

DSCP Entry number for the traffic.

Integer32

Constraints:
range: 1-5000

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.1

alaQoSDSCPPriority

DSCP priority for the traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.2

alaQoSDSCPDropPrecedence

DSCP drop precedence for the traffic.

Enumerationr/w

Enumerated Values:

1	low
2	medium
3	high

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.3

alaQoSDSCPRowStatus

RowStatus entry for QoS DSCP.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.4

alaQoSAutoMacRangeTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56 · 1 row entry · 3 columns

Open in standard view

Table of QoS Auto Mac ranges

alaQoSAutoMacRangeEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1

Definition of QoS Auto Mac Range

Indexes

alaQoSAutoMacRangeIndex

Column	Syntax	OID
alaQoSAutoMacRangeIndex Index to the Mac range table.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.1`
alaQoSAutoMacRangeStart specifies the starting mac-address of the default mac-range which is supported by qos auto phones.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.2`
alaQoSAutoMacRangeEnd specifies the end mac-address of the default mac-range which is supported by qos auto phones.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.3`

alaQoSExtendedRuleTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57 · 1 row entry · 12 columns

Open in standard view

Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis

alaQoSExtendedRuleEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1

Definition of QoS Rule

Indexes

alaQoSRuleName alaQoSExtendedRuleSplitRuleID

Column	Syntax	OID
alaQoSExtendedRuleSplitRuleID Split Rule ID defined from the number of members in the group.	Unsigned32 Constraints: `range: 1-8192`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.1`
alaQoSExtendedRuleChassis Chassis on which rate-limit is enabled.	Integer32 Constraints: `range: 0-16`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.2`
alaQoSExtendedRuleSlot Slot on which rate-limit is enabled.	Integer32 Constraints: `range: 0-16`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.3`
alaQoSExtendedRulePort Port on which rate-limit is enabled.	Integer32 Constraints: `range: 1-52`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.4`
alaQoSExtendedRulePacketCount Counter for packets matching this rule	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.5`
alaQoSExtendedRuleByteCount Counter for bytes matching this rule	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.6`
alaQoSExtendedRuleGreenPacketCount Counter for the number of packets which are green compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.7`
alaQoSExtendedRuleYellowPacketCount Counter for the number of packets which are yellow compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.8`
alaQoSExtendedRuleRedPacketCount Counter for the number of packets which are red compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.9`
alaQoSExtendedRuleGreenByteCount Counter for the number of Bytes which are green compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.10`
alaQoSExtendedRuleYellowByteCount Counter for the number of Bytes which are yellow compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.11`
alaQoSExtendedRuleRedByteCount Counter for the number of Bytes which are red compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.12`

alaQoSIpNetworkSummaryTable

table

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58 · 1 row entry · 10 columns

Open in standard view

Table of QoS IpNetworkSummary definitions.

alaQoSIpNetworkSummaryEntry entry .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1

Definition of QoS IpNetworkSummary.

Indexes

alaQoSRuleName

Column Syntax OID

alaQoSIpNetworkSummaryProtocol

Network Protocols as specified in condition classifier for given rule.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.1

alaQoSIpNetworkSummarySourceIpAddressType

Source Ip Address Type as specified in condition classifier for given rule.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.2

alaQoSIpNetworkSummarySourceIpAddress

Source IP address as specified in condition classifier for given rule.

OctetString

Constraints:
range: 4-4
range: 16-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.3

alaQoSIpNetworkSummaryDestinationIpAddressType

Destination Ip Address Type as specified in condition classifier for given rule.

Enumeration

Enumerated Values:

1	ipv4
2	ipv6

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.4

alaQoSIpNetworkSummaryDestinationIpAddress

Destination Ip Address as specified in condition classifier for given rule.

OctetString

Constraints:
range: 4-4
range: 16-16

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.5

alaQoSIpNetworkSummarySourceGroup

Source Group as specified in condition classifier for given rule.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.6

alaQoSIpNetworkSummaryDestinationGroup

Destination Group as specified in condition classifier for given rule.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.7

alaQoSIpNetworkSummaryVrfName

VRF Name as specified in condition classifier for given rule.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.8

alaQoSIpNetworkSummaryAction

The action performed when the packet hit the rule.

Enumeration

Enumerated Values:

1	accept
2	deny

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.9

alaQoSIpNetworkSummaryHitCount

Number of packets hit the rule.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.10