alaQoSPortTrusted

ALCATEL-ENT1-QOS-MIB · .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.4
MIB view Table view

Object

column r/w Enumeration 
Status of trusting 802.1p/TOS/DSCP values.
When trusted, 802.1p/DSCP values in the packet are passed
through the switch.  When untrusted, 802.1p/DSCP values are set
to the port defaults.

Context

MIB
ALCATEL-ENT1-QOS-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.4
Type
column
Access
readwrite
Status
current
Parent
alaQoSPortEntry
Table
alaQoSPortTable
Siblings
19

Syntax

Enumeration

Values & Constraints

Enumerated Values
1yes
2no

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaQoSPortSlot
Physical slot port resides on If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.1
alaQoSPortPhysicalBandwidth
Physical bandwidth of port (Kbit/sec)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.10
alaQoSPortRowStatus
Used to create/delete ports according to the RowStatus convention
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.11
alaQoSPortDefaultClassification
Ingress traffic classification parameter for Firenze port What field to interpret as priority for WRED
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.12
alaQoSPortMaximumBandwidth
Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this port
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.13
alaQoSPortMaximumBandwidthStatus
Status field indicating whether to enforce maximum bandwidth on port.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.14
alaQoSPortMaximumIngBandwidth
Maximum igress bandwidth (Kbits/sec). Maximum rate to recieve traffic in on this port
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.15
alaQoSPortMaximumIngBandwidthStatus
Status field indicating whether to enforce maximum bandwidth on port.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.16
alaQoSPortMaximumIngressDepth
Maximum depth of ingress queues (Kbytes). Maximum depth of queues on this port
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.17
alaQoSPortMaximumIngressDepthStatus
Status field indicating whether to enforce maximum depth on this port
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.18
alaQoSPortDEIMarking
This object specifies if, in egress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) -…
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.19
alaQoSPortPort
Physical port number
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.2
alaQoSPortDEIMapping
This object specifies if, in ingress traffic, the DEI/CFI bit will be set or not for the traffic which is not conformant to SLA (Yellow color packets). enabled(1) …
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.20
alaQoSPortInterfaceType
The type of interface QoS matches for this physical port
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.3
alaQoSPortDefault8021p
802.1p priority value to use for untagged frames arriving on the port and tagged frames when the port is untrusted.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.5
alaQoSPortDefaultDSCP
DSCP value to stamp in frames arriving on the port when the port is untrusted
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.6
alaQoSPortMaximumDefaultDepth
Maximum depth of egress queues (Kbytes). Maximum depth of queues on this port
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.7
alaQoSPortMaximumDefaultDepthStatus
Status field indicating whether to enforce maximum depth on this port
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.8
alaQoSPortReset
Reset all QoS parameters to default values
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.9