alaQoSAppliedConditionSourcePortEnd

ALCATEL-ENT1-QOS-MIB · .1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.65
MIB view Table view

Object

column Integer32 
Source physical port range end to use for traffic
classification.  Must be greater than port range start to
indicate a range.  When '1', use source port as a single port.

Context

MIB
ALCATEL-ENT1-QOS-MIB
OID
.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.65
Type
column
Access
readonly
Status
current
Parent
alaQoSAppliedConditionEntry
Table
alaQoSAppliedConditionTable
Siblings
142

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-52

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaQoSAppliedConditionName
Name of condition
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.1
alaQoSAppliedConditionDestinationPort
Destination physical port range start to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.10
alaQoSAppliedConditionIpv6FlowLabelStatus
Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.100
alaQoSAppliedConditionMcastIpv6Addr
Multicast IPv6 address to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.101
alaQoSAppliedConditionMcastIpv6AddrStatus
Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.102
alaQoSAppliedConditionMcastIpv6Mask
Multicast IPv6 mask to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.103
alaQoSAppliedConditionDscpEnd
DSCP value to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.104
alaQoSAppliedConditionInnerSourceVlan
Customer VLAN to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.105
alaQoSAppliedConditionInnerSourceVlanStatus
Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.106
alaQoSAppliedConditionInner8021p
Customer 802.1p to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.107
alaQoSAppliedConditionInner8021pStatus
Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.108
alaQoSAppliedConditionVrfName
Name of Vrf to match traffic in
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.109
alaQoSAppliedConditionDestinationPortGroup
Destination physical port group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.11
alaQoSAppliedConditionVrfNameStatus
Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.110
alaQoSAppliedConditionFragments
TCP packet fragments
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.111
alaQoSAppliedConditionSourceChassis
Source physical chassis used for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.112
alaQoSAppliedConditionDestinationChassis
Destination physical chassis used for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.113
alaQoSAppliedConditionAppFpGroup
Application Fingerprinting group.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.114
alaQoSAppliedConditionAppFpGroupStatus
Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.115
alaQoSAppliedConditionSIP
SIP type to use for traffic classification
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.116
alaQoSAppliedConditionSIPStatus
SIP Status field indicates whether SIP is enabled or disabled for traffic classification
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.117
alaQoSAppliedConditionDPIAppName
DPI Application Member.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.118
alaQoSAppliedConditionDPIAppGrp
DPI Application Member Type.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.119
alaQoSAppliedConditionDestinationPortGroupStatus
Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.12
alaQoSAppliedConditionDPIAppNameStatus
DPI Status field indicates whether DPI Application name is enabled or disabled for traffic classification
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.120
alaQoSAppliedConditionDPIAppGroupStatus
DPI Status field indicates whether DPI Application group is enabled or disabled for traffic classification
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.121
alaQoSAppliedConditionVxlanVni
Vni value associated with this vxlan
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.122
alaQoSAppliedConditionVxlanVniStatus
Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.123
alaQoSAppliedConditionVxlanPortcolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.124
alaQoSAppliedConditionVxlanPortStatus
Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.125
alaQoSAppliedConditionVmSourceMacAddr
Source MAC address to use for traffic classification
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.126
alaQoSAppliedConditionVmSourceMacAddrStatus
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.127
alaQoSAppliedConditionVmSourceMacMask
Source MAC address to use for traffic classification
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.128
alaQoSAppliedConditionVmSourceIpAddr
Source IP address to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.129
alaQoSAppliedConditionSourceMacAddr
Source MAC address to use for traffic classification
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.13
alaQoSAppliedConditionVmSourceIpAddrStatus
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.130
alaQoSAppliedConditionVmSourceIpMask
Source IP mask to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.131
alaQoSAppliedConditionVmSourceIpv6IpAddr
Source IPV6 address to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.132
alaQoSAppliedConditionVmSourceIpv6IpAddrStatus
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.133
alaQoSAppliedConditionVmSourceIpv6IpMask
Source IPV6 mask to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.134
alaQoSAppliedConditionVmIpProtocol
IP protocol to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.135
alaQoSAppliedConditionVmIpProtocolStatus
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.136
alaQosAppliedConditionVmL4SourcePort
Source IP port to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.137
alaQosAppliedConditionVmL4SourcePortStatus
Status field indicating whether the source port needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.138
alaQosAppliedConditionVmL4DestPort
Destination port to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.139
alaQoSAppliedConditionSourceMacAddrStatus
Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.14
alaQosAppliedConditionVmL4DestPortStatus
Status field indicating whether the destination port needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.140
alaQosAppliedConditionVxlanStatus
Status field indicating vxlan configuration.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.141
alaQoSAppliedConditionSourcePortSplitGroup
Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.142
alaQoSAppliedConditionSourcePortSplitGroupStatus
Status field indicating whether the source physical port splitGroup needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.143
alaQoSAppliedConditionSourceMacMask
Source MAC mask to use for traffic classification
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.15
alaQoSAppliedConditionSourceMacGroup
Source MAC group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.16
alaQoSAppliedConditionSourceMacGroupStatus
Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.17
alaQoSAppliedConditionDestinationMacAddr
Destination MAC address to use for traffic classification
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.18
alaQoSAppliedConditionDestinationMacAddrStatus
Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.19
alaQoSAppliedConditionSource
What entity created the condition.
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.2
alaQoSAppliedConditionDestinationMacMask
Destination MAC mask to use for traffic classification
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.20
alaQoSAppliedConditionDestinationMacGroup
Destination MAC group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.21
alaQoSAppliedConditionDestinationMacGroupStatus
Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.22
alaQoSAppliedConditionSourceVlan
Source VLAN to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.23
alaQoSAppliedConditionSourceVlanStatus
Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.24
alaQoSAppliedConditionDestinationVlan
Destination VLAN to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.25
alaQoSAppliedConditionDestinationVlanStatus
Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.26
alaQoSAppliedCondition8021p
802.1p value to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.27
alaQoSAppliedCondition8021pStatus
Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.28
alaQoSAppliedConditionSourceIpAddr
Source IP address to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.29
alaQoSAppliedConditionSourceSlot
Source physical slot used for traffic classification When 0, the port identifies an aggregate
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.3
alaQoSAppliedConditionSourceIpAddrStatus
Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.30
alaQoSAppliedConditionSourceIpMask
Source IP mask to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.31
alaQoSAppliedConditionSourceNetworkGroup
Source network group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.32
alaQoSAppliedConditionSourceNetworkGroupStatus
Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.33
alaQoSAppliedConditionDestinationIpAddr
Destination IP address to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.34
alaQoSAppliedConditionDestinationIpAddrStatus
Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.35
alaQoSAppliedConditionDestinationIpMask
Destination IP mask to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.36
alaQoSAppliedConditionDestinationNetworkGroup
Destination network group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.37
alaQoSAppliedConditionDestinationNetworkGroupStatus
Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.38
alaQoSAppliedConditionMulticastIpAddr
Multicast IP address to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.39
alaQoSAppliedConditionSourceSlotStatus
Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.4
alaQoSAppliedConditionMulticastIpAddrStatus
Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.40
alaQoSAppliedConditionMulticastIpMask
Multicast IP mask to use for traffic classification
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.41
alaQoSAppliedConditionMulticastNetworkGroup
Multicast network group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.42
alaQoSAppliedConditionMulticastNetworkGroupStatus
Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.43
alaQoSAppliedConditionTos
TOS value to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.44
alaQoSAppliedConditionTosStatus
Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.45
alaQoSAppliedConditionTosMask
TOS mask to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.46
alaQoSAppliedConditionDscp
DSCP value to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.47
alaQoSAppliedConditionDscpStatus
Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.48
alaQoSAppliedConditionDscpMask
DSCP mask to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.49
alaQoSAppliedConditionSourcePort
Source physical port range start to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.5
alaQoSAppliedConditionIpProtocol
IP protocol to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.50
alaQoSAppliedConditionIpProtocolStatus
Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.51
alaQoSAppliedConditionSourceIpPort
Source IP port range start to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.52
alaQoSAppliedConditionSourceIpPortStatus
Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.53
alaQoSAppliedConditionDestinationIpPort
Destination IP port range start to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.54
alaQoSAppliedConditionDestinationIpPortStatus
Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.55
alaQoSAppliedConditionService
Name of service to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.56
alaQoSAppliedConditionServiceStatus
Status field indicating whether the service needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.57
alaQoSAppliedConditionServiceGroup
Name of service group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.58
alaQoSAppliedConditionServiceGroupStatus
Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.59
alaQoSAppliedConditionSourcePortGroup
Source physical port group to use for traffic classification
columnOctetString.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.6
alaQoSAppliedConditionIcmpType
ICMP type to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.60
alaQoSAppliedConditionIcmpTypeStatus
Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.61
alaQoSAppliedConditionIcmpCode
ICMP code to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.62
alaQoSAppliedConditionIcmpCodeStatus
Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.63
alaQoSAppliedConditionRowStatus
Used to create/delete conditions according to the RowStatus convention
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.64
alaQoSAppliedConditionDestinationPortEnd
Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination port as a single port.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.66
alaQoSAppliedConditionSourceIpPortEnd
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.67
alaQoSAppliedConditionDestinationIpPortEnd
Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destination IP port as a …
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.68
alaQoSAppliedConditionSourceTcpPort
Source TCP port range start to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.69
alaQoSAppliedConditionSourcePortGroupStatus
Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.7
alaQoSAppliedConditionSourceTcpPortStatus
Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.70
alaQoSAppliedConditionSourceTcpPortEnd
Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP port as a single TCP p…
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.71
alaQoSAppliedConditionDestinationTcpPort
Destination TCP port range start to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.72
alaQoSAppliedConditionDestinationTcpPortStatus
Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.73
alaQoSAppliedConditionDestinationTcpPortEnd
Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use destination TCP port a…
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.74
alaQoSAppliedConditionSourceUdpPort
Source UDP port range start to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.75
alaQoSAppliedConditionSourceUdpPortStatus
Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.76
alaQoSAppliedConditionSourceUdpPortEnd
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP p…
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.77
alaQoSAppliedConditionDestinationUdpPort
Destination UDP port range start to use for traffic classification.
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.78
alaQoSAppliedConditionDestinationUdpPortStatus
Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.79
alaQoSAppliedConditionDestinationSlot
Destination physical slot used for traffic classification When 0, the port identifies an aggregate
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.8
alaQoSAppliedConditionDestinationUdpPortEnd
Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use destination UDP port a…
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.80
alaQoSAppliedConditionEthertype
Ethertype value to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.81
alaQoSAppliedConditionEthertypeStatus
Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.82
alaQoSAppliedConditionTcpFlags
Use any/all specifieid TCP flags for traffic classification
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.83
alaQoSAppliedConditionTcpFlagsStatus
Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.84
alaQoSAppliedConditionTcpFlagsVal
TCP flags values used for traffic classification
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.85
alaQoSAppliedConditionTcpFlagsValStatus
Not used
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.86
alaQoSAppliedConditionTcpFlagsMask
Mask of TCP flags bits used for traffic classification
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.87
alaQoSAppliedConditionTcpFlagsMaskStatus
Not used
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.88
alaQoSAppliedConditionTcpEstablished
Look for established TCP sessions in classification
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.89
alaQoSAppliedConditionDestinationSlotStatus
Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.9
alaQoSAppliedConditionSourceIpv6Addr
Source IPv6 address to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.90
alaQoSAppliedConditionSourceIpv6AddrStatus
Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.91
alaQoSAppliedConditionSourceIpv6Mask
Source IPv6 mask to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.92
alaQoSAppliedConditionDestinationIpv6Addr
Destination IPv6 address to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.93
alaQoSAppliedConditionDestinationIpv6AddrStatus
Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.94
alaQoSAppliedConditionDestinationIpv6Mask
Destination IPv6 mask to use for traffic classification
columnIPV6-TCIpv6Address.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.95
alaQoSAppliedConditionIpv6Traffic
classify IPV6 traffic
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.96
alaQoSAppliedConditionIpv6NH
NH value to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.97
alaQoSAppliedConditionIpv6NHStatus
Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.98
alaQoSAppliedConditionIpv6FlowLabel
FL value to use for traffic classification
columnInteger32.1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.99