ADTRAN-GENERIC-BRIDGE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
82

adGenBridgeModuleConfTable

table
.1.3.6.1.4.1.664.5.67.1.16.1.1 · 1 row entry · 6 columns
Open in standard view 
This table contains global bridge configuration
parameters, per populated card slot.
adGenBridgeModuleConfEntry entry .1.3.6.1.4.1.664.5.67.1.16.1.1.1
This list contains bridge group limits per module .
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenBridgeModuleMaxBridges
The maximum number of bridges this module will support.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.664.5.67.1.16.1.1.1.1
adGenBridgeModuleMaxPhyls
The total number of physical links that may be mapped to
bridges on the module, including active and inactive mappings.
Integer32
Constraints:
range: 0-2200
 .1.3.6.1.4.1.664.5.67.1.16.1.1.1.2
adGenBridgeModuleConfBridges
The current number of bridges configured on the module.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.664.5.67.1.16.1.1.1.3
adGenBridgeModuleConfPhyls
The total number of physical links currently mapped to
bridges on the module, including in-service and
out-of-service mappings.
Integer32
Constraints:
range: 0-2200
 .1.3.6.1.4.1.664.5.67.1.16.1.1.1.4
adGenBridgeModuleMaxBandwidth
The maximum bandwith allocated for this module in kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.1.1.5
adGenBridgeModuleConfBandwidth
The bandwidth currently being used by this module in kbps.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.1.1.6

adGenBridgeTable

table
.1.3.6.1.4.1.664.5.67.1.16.1.3 · 1 row entry · 26 columns
Open in standard view 
The Bridge table.  A unique Bridge is created
for every bonding or bridging instance, with an associated
type that determines its functionality.
adGenBridgeEntry entry .1.3.6.1.4.1.664.5.67.1.16.1.3.1
An entry in the Bridge table. This entry is
used to model a single instance of an aggregation
(bridging or bonding) engine.
Indexes
adGenBridgeIfIndex
Column Syntax OID
adGenBridgeIfIndex
The ifIndex value of the interface associated
with this Bridge. The IANA type should be linegroup (210).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.1
adGenBridgeType
The intended type of this bridge EFM, IMA, TR-101, etc.
AdGenBridgeTyper/w
Textual Convention: AdGenBridgeType Enumeration
Type Values:
1notProvisioned
2efm
3tr101
4ima
5linkAggregation
6macSwitched
7ppp
8atm
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.2
adGenBridgeName
The textual name given to this Bridge.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.3
adGenBridgeProtMode
The protection mode of the group single-slot (not protectable),
unprotected (but potentially protectable), or protected.
AdGenBridgeProtMode
Textual Convention: AdGenBridgeProtMode Enumeration
Type Values:
1unsupported
2unprotected
3protected
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.4
adGenBridgeProtAvail
Indicates if the selected protection slot is available
for protection switchover.
AdGenBridgeProtAvail
Textual Convention: AdGenBridgeProtAvail Enumeration
Type Values:
1unsupported
2unavailable
3available
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.5
adGenBridgeProtState
Indicates if the protection card is actively running this bridge.
AdGenBridgeProtState
Textual Convention: AdGenBridgeProtState Enumeration
Type Values:
1unsupported
2unprotected
3protected
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.6
adGenBridgeProtSlot
A bit map of Protection Module slots part of this Protection Group.
Slot 1 0x00000001
Slot 2 0x00000002
Slot 3 0x00000004
Slot 4 0x00000008
Slot 5 0x00000010
|
|
Slot 30 0x20000000
Slot 31 0…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.7
adGenBridgeMinNumActivePhyls
The minimum number of active PHYLS that have
to be mapped to this group before the OperStatus
of the bridge can be declared to be 'up'.
If the active number ever drops below this number
then the Bridge will enter an Ope…
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.8
adGenBridgeOperStatus
The current operational status of the local end of the group.
AdGenBridgeOperStatus
Textual Convention: AdGenBridgeOperStatus Enumeration
Type Values:
1up
2down
3testing
4noLinksInGroup
5upPartial
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.9
adGenBridgeLastChange
The value of sysUpTime at the time this
Bridge group entered its current operational state.
AdGenBridgeLastChange
Textual Convention: AdGenBridgeLastChange Unsigned32
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.10
adGenBridgeNumCfgEVPLs
The number of EVPLs currently assigned against the ifIndex
of this bridge. This value is incremented by the agent
upon the creation of an EVPL against this bridge and
decremented upon the deletion of an EVPL that was as…
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.11
adGenBridgeNumCfgEVCLs
The number of EVCLs currently assigned against the ifIndex
of this bridge. This value is incremented by the agent
upon the creation of an EVCL against this bridge and
decremented upon the deletion of an EVCL that was as…
Integer32
Constraints:
range: 0-4096
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.12
adGenBridgeNumCfgPhyls
The number of PHYLs currently mapped to this bridge.
This value is incremented by the agent upon the creation
of a Bridge-PHYL mapping.
Integer32
Constraints:
range: 0-2200
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.13
adGenBridgeNumActPhyls
The number of PHYLs currently active
as part of this group.
Integer32
Constraints:
range: 0-2200
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.14
adGenBridgeLastError
The string describing the last error experienced.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.15
adGenBridgeRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. Setting this value to 'active'
indicates that the Bridge is administratively In-Service.
Setting this value to 'inactive' indica…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.16
adGenBridgeMaxBandwidth
The maximum bandwidth allocated for this bridge in kbps.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.17
adGenBridgeCurrentBandwidth
The bandwith currently used by this bridge in kpbs.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.18
adGenBridgeUpstreamRate
The Upstream Rate configured on the bridge in kbps.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.19
adGenBridgeDownstreamRate
The Downstream Rate configured on the bridge in kbps.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.20
adGenBridgeCurrentUpstreamRate
The Upstream Rate current status on the bridge in kbps.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.21
adGenBridgeCurrentDownstreamRate
The Downstream Rate current status on the bridge in kbps.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.22
adGenBridgeRateControl
Mode that divides the bridge rates over the links.
Bridge Rate Control On is 1
Bridge Rate Control Off is 2
AdGenBridgeRateControlr/w
Textual Convention: AdGenBridgeRateControl Enumeration
Type Values:
1rateControlOn
2rateControlOff
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.23
adGenBridgeAlarmSuppress
Indicates whether or not alarms will be generated
by this Bridge group. It is only applicable if
rowStatus = active.
AdGenBridgeAlarmSuppressr/w
Textual Convention: AdGenBridgeAlarmSuppress Enumeration
Type Values:
1suppress
2noSuppress
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.24
adGenBridgeSecondaryUpstreamRate
The Secondary Upstream Rate threshold configured on the bridge in kbps. This is only a threshold used to trigger an alarm.
A non-zero value enables the alarm associated with the provisioned threshold, default is disable…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.25
adGenBridgeSecondaryDownstreamRate
The Secondary Downstream Rate threshold configured on the bridge in kbps. This is only a threshold used to trigger an alarm.
A non-zero value enables the alarm associated with the provisioned threshold, default is disab…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.3.1.26

adGenBridgePhylMapTable

table
.1.3.6.1.4.1.664.5.67.1.16.1.5 · 1 row entry · 6 columns
Open in standard view 
Row creation adds/maps the physical link to a bridge.
adGenBridgePhylMapEntry entry .1.3.6.1.4.1.664.5.67.1.16.1.5.1
An entry in the PHYL Map table.
This entry is represents one link that
is associated with a bridge.
Indexes
adGenBridgePhylMapBridgeIfIndex adGenBridgePhylMapPhylIfIndex
Column Syntax OID
adGenBridgePhylMapBridgeIfIndex
The ifIndex value of the Bridge to which the physical link
is mapped.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.5.1.1
adGenBridgePhylMapPhylIfIndex
The ifIndex value of the physical link.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.5.1.2
adGenBridgePhylMapOperStatus
The current operational status of the Bridge-PHYL mapping
indicating if the physical link is actively participating
in the Bridge. This can be down if the row status of the
BridgePhyl Map entry is down, the row status o…
AdGenBridgePhylOperStatus
Textual Convention: AdGenBridgePhylOperStatus Enumeration
Type Values:
1up
2down
3testing
4unknown
 .1.3.6.1.4.1.664.5.67.1.16.1.5.1.3
adGenBridgePhylMapLastChange
The value of sysUpTime at the time this
Bridge-PHYL mapping entered its current operational state.
AdGenBridgeLastChange
Textual Convention: AdGenBridgeLastChange Unsigned32
 .1.3.6.1.4.1.664.5.67.1.16.1.5.1.4
adGenBridgePhylMapLastError
The string describing the last error experienced.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.1.5.1.5
adGenBridgePhylMapRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. Creating a row adds the
PHYL to the Bridge. Setting this value to 'active'
indicates that the Bridge-PHYL mapping is
administrat…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.67.1.16.1.5.1.6

adGenBridgePhylStatusTable

table
.1.3.6.1.4.1.664.5.67.1.16.1.6 · 1 row entry · 5 columns
Open in standard view 
Displays the status of the available PHYLs in the system,
including which Bridge (if any) a PHYL is associated.
It also indicates the installed status of a certain
PHYL.
adGenBridgePhylStatusEntry entry .1.3.6.1.4.1.664.5.67.1.16.1.6.1
An entry in the PHYL Status table.
This entry is represents one link.
Indexes
adGenBridgePhylStatusPhylIfIndex
Column Syntax OID
adGenBridgePhylStatusPhylIfIndex
The ifIndex value of the physical link. IANA type should be propVirtual(53).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.6.1.1
adGenBridgePhylStatusBridgeIfIndex
The ifIndex value of the Bridge of which this
physical link is apart. A value of '0' indicates
that the link is currently not mapped to any
Bridge. IANA type should be linegroup(210).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.6.1.2
adGenBridgePhylStatusBridgeType
Indicates the type (if any) of bridge with which this PHYL is associated.
AdGenBridgeType
Textual Convention: AdGenBridgeType Enumeration
Type Values:
1notProvisioned
2efm
3tr101
4ima
5linkAggregation
6macSwitched
7ppp
8atm
 .1.3.6.1.4.1.664.5.67.1.16.1.6.1.3
adGenBridgePhylStatusInstallStatus
Indicates whether or not the physical interface associated with this PHYL
exists.
AdGenBridgePhylInstalled
Textual Convention: AdGenBridgePhylInstalled Enumeration
Type Values:
1uninstalled
2installed
 .1.3.6.1.4.1.664.5.67.1.16.1.6.1.4
adGenBridgePhylStatusOperStatus
The current operational status of the Bridge-PHYL Mapping. This status
should match the adGenBridgePhylMapOperStatus of the
corresponding row in the adGenBridgePhylMapTable.
The current operational status of the Bridge-…
AdGenBridgePhylOperStatus
Textual Convention: AdGenBridgePhylOperStatus Enumeration
Type Values:
1up
2down
3testing
4unknown
 .1.3.6.1.4.1.664.5.67.1.16.1.6.1.5

adGenBridgeProtectionGroupTable

table
.1.3.6.1.4.1.664.5.67.1.16.1.9 · 1 row entry · 12 columns
Open in standard view 
The Bridge Protection Group table.  A unique Bridge Protection Group is created
to protect bonding engine. This fecilitates creating a Protection Group and
adding or removing Protection Slots (PM slots) and Protected Slots (AM slots) to or
from an existing Protection Groups. The Protection or Protected slots can be added
or removed when the Protection Group Row Status is in active state. The Last Error
string will return the error message if for some reason the slots cannot be added
(for e.g. Bridge Type mismatch) or the Protection Group cannot be created. There
are no variables in this table that needs to be set before the row status can be
set to active.
adGenBridgeProtectionGroupEntry entry .1.3.6.1.4.1.664.5.67.1.16.1.9.1
An entry in the Bridge Protection Group table. This entry is
used to model a protection group for a protection engine.
Indexes
adGenBridgeProtectionGroupGroupIndex
Column Syntax OID
adGenBridgeProtectionGroupGroupIndex
A unique value to identify this Bridge Protection Group.
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.1
adGenBridgeProtectionGroupBridgeType
Indicates the type of bridge this Protection Group is created for.
This must be compatible with the Protection and Protected Module slot
bridge type.
AdGenBridgeTyper/w
Textual Convention: AdGenBridgeType Enumeration
Type Values:
1notProvisioned
2efm
3tr101
4ima
5linkAggregation
6macSwitched
7ppp
8atm
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.2
adGenBridgeProtectionGroupName
The textual name given to this Protection Group.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.3
adGenBridgeProtectionGroupProtectingSlots
A bit map of Protection Module slots part of this Protection Group.
Displays the Protection Modules in this Protection Group.
Slot 1 0x00000001
Slot 2 0x00000002
Slot 3 0x00000004
Slot 4 0x00000008
Slot 5 0x00…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.4
adGenBridgeProtectionGroupProtectedSlots
A bit map of Bonding Engine slots to be protected (part of this Protection Group).
Displays the Protecting Modules in this Protection Group.
Slot 1 0x00000001
Slot 2 0x00000002
Slot 3 0x00000004
Slot 4 0x0000000…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.5
adGenBridgeProtectionGroupAddProtectingModule
Add a Protecting Module (slot) to the Protection Group identified by
adGenBridgeProtectionGroupIndex.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.6
adGenBridgeProtectionGroupAddProtectedModule
Add a Protected Module (slot) to the Protection Group identified by
adGenBridgeProtectionGroupIndex.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.7
adGenBridgeProtectionGroupRmvProtectingModule
Remove a Protecting Module (slot) from the Protection Group identified by
adGenBridgeProtectionGroupIndex.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.8
adGenBridgeProtectionGroupRmvProtectedModule
Remove a Protected Module (slot) from the Protection Group identified by
adGenBridgeProtectionGroupIndex.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.9
adGenBridgeProtectionGroupWaitToRestoreTime
In case of a revertive swicth, this indicates the time in minutes
to wait before a switch back can take place. Wait To Restore time is
set for the whole group and is applicable to all the Protected Slots
(AMs) in the gr…
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.10
adGenBridgeProtectionGroupLastError
The string describing the last error experienced provisioning the Protection Group
or adding or removing Protection or Protected slots.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.11
adGenBridgeProtectionGroupRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. Creating a row adds either a Protected Module or
a Protecting Module to a Protection Group.
Setting this value to 'active' indic…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.67.1.16.1.9.1.12

adGenBridgeProtectionTable

table
.1.3.6.1.4.1.664.5.67.1.16.1.10 · 1 row entry · 11 columns
Open in standard view 
The Bridge Protection table containing protection related provisioning
for each of the Protected Modules or Protection Modules. This is
a static table for all the slots in the system. The Protected Modules and
Protection Modules forming a Protection Group are identified by the
adGenBridgeProtectionGroupTable.
adGenBridgeProtectionEntry entry .1.3.6.1.4.1.664.5.67.1.16.1.10.1
An entry in the Bridge Protection table. This entry is
used to provision the protection related parameters for bonding
engine protection. These parameters are provisioned for Protected
Module slots and Protection Module…
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenBridgeProtectionGroupIndex
Displays the Protection Group Index this slot is part of. If this slot
is not part of any Protection Group, then this value will be zero.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.1
adGenBridgeProtectionBridgeType
This is the value read from the module that is plugged into the slot. If bridge
type of this module is incompatible with the Bridge Type of the Protection
Group this module is part of then an alarm will be generated.
AdGenBridgeType
Textual Convention: AdGenBridgeType Enumeration
Type Values:
1notProvisioned
2efm
3tr101
4ima
5linkAggregation
6macSwitched
7ppp
8atm
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.2
adGenBridgeProtectionVersion
This must be compatible with Protection and Protected Modules. A higher
version Protection Module can protect a lower or equal version Protected
module. This versioning is done to make sure that the Protection Module
ha…
AdGenProtectionVersion
Textual Convention: AdGenProtectionVersion Enumeration
Type Values:
0notsupported
1version1
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.3
adGenBridgeProtectionSlot
This is a read only value and indicates the slot number of this entry.
Integer32
Constraints:
range: 0-32
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.4
adGenBridgeProtectionState
This is a read only value and indicates state of the Protection or Protected Module.
A value of zero indicates the module plugged into this slot is not being protected
or is not protecting another module. A non-zero val…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.5
adGenBridgeProtectionPriority
This is the priority of the Protected Modules within the protection
group in case priority protection is enabled. This value can be set to
zero. If all the Protected Modules priority is set to zero then priority
protect…
Integer32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.6
adGenBridgeProtectionRevertiveSwitch
Indicates whether revertive switch is enabled or not for this Protected
Module. This item is not intended for the Protection Module and is ignored.
AdGenBridgeProtectionRevertiveSwitchr/w
Textual Convention: AdGenBridgeProtectionRevertiveSwitch Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.7
adGenBridgeProtectionLockout
Indicates whether lockout is enabled or not for this Module.
AdGenBridgeProtectionLockoutr/w
Textual Convention: AdGenBridgeProtectionLockout Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.8
adGenBridgeProtectionManualSwitch
Indicates whether to do a manual switch to protection or to manual switch
back from protect. Not intended for the Protection Module and is ignored.
AdGenBridgeManualSwitchr/w
Textual Convention: AdGenBridgeManualSwitch Enumeration
Type Values:
1switchToProtect
2switchToNonProtect
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.9
adGenBridgeProtectionManualSwitchTime
In case a manual switch is triggered, this time in minutes
indicates for how long the manual switch will be in effect. This
item is not intended for the Protection Module and is ignored.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.10
adGenBridgeProtectionErrorStatus
Displays error status in case the manual switch command fails.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.1.10.1.11

adGenBridgeNameLookupTable

table
.1.3.6.1.4.1.664.5.67.1.16.1.12 · 1 row entry · 2 columns
Open in standard view 
The Bridge Name Lookup table. As each bridge receives a name
it is inserted into a lookup table along with it's ifIndex.
adGenBridgeNameLookupEntry entry .1.3.6.1.4.1.664.5.67.1.16.1.12.1
An entry in the Bridge Name Lookup table. This entry is
used to store the bridge IfIndex and indexed by the name.
Indexes
adGenBridgeNameLookupIndex
Column Syntax OID
adGenBridgeNameLookupIndex
The sring name value of the the bridge enity
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.1.12.1.1
adGenBridgeNameIfIndex
The Bridge IfIndex that is retrieved from the table
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.664.5.67.1.16.1.12.1.2

adGenEasyBridgeTable

table
.1.3.6.1.4.1.664.5.67.1.16.2.2 · 1 row entry · 13 columns
Open in standard view 
Activation of a row in this table causes the TA5000 to perform the following:
1) Verify that all pertinent parameters are set.
2) Verify that there are resources available to perform the requested operation
3) If resources are available then apply to the GenBridge and GenBridgePhylMap tables
This table abstracts the user from internal bandwidth constraints, AM incompatabilities, and
other TA5000 limitations that will change over time. If a requested operation cannot
occur then the status string will be set with an appropriate error.
adGenEasyBridgeEntry entry .1.3.6.1.4.1.664.5.67.1.16.2.2.1
Each entry corresponds to a different bridge. An entry will be deleted after 2 minutes of
inactivity. This table is indexed by the values returned from the
adGenEasyBridgeIndexNext OID.
Indexes
adGenEasyBridgeIndex
Column Syntax OID
adGenEasyBridgeIndex
This is an arbitrary index assigned by the adGenEasyBridgeIndexNext
OID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.1
adGenEasyBridgeName
This object must be set before a row is activated whether this row is
'Create' or 'Modify'. If it is 'Create' then this string will be set
in the adGenBridgeName OID. If the row is 'Modify' then this name
will only be u…
OctetStringr/w
Constraints:
range: 1-50
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.2
adGenEasyBridgeType
The intended type of this bridge EFM, IMA, TR-101, etc.
AdGenBridgeTyper/w
Textual Convention: AdGenBridgeType Enumeration
Type Values:
1notProvisioned
2efm
3tr101
4ima
5linkAggregation
6macSwitched
7ppp
8atm
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.3
adGenEasyBridgeCreateOrModify
This OID indicates if this row is attempting to create a new bridge
or modify an existing one. If the mode is 'create' then the bridge will
be created with the parameters in this table unless they are invalid
(such as a…
Enumerationr/w
Enumerated Values:
1create
2modify
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.4
adGenEasyBridgeUpstreamRate
This object specifies the rate of the bridge for the upstream direction in Kbps. This parameter
helps the agent determine the location of the bridge as well as the
rate of each of the links associated with this bridge. …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.5
adGenEasyBridgeDownstreamRate
This object specifies the rate of the bridge for the downstream direction in Kbps. This parameter
helps the agent determine the location of the bridge as well as the
rate of each of the links associated with this bridge…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.6
adGenEasyBridgeMemberPhyls
This object is a comma delimited string of ifIndices. Each ifIndices
corresponds to a GenBridgePhyl that should be attached to the bridge.
This string must contain at least one ifIndex on a 'create' operation. For
examp…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.7
adGenEasyBridgeMinNumActivePhyls
This object specifies the genBridgeMinNumActivePhyls value. It must
always be at most the same number as phyls specified in
adGenEasyBridgeMemberPhyls. If the number of phyls specified by
adGenEasyBridgeMemberPhyls is g…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.8
adGenEasyBridgeStatusString
This object indicates the status of the last attempted activation of this
row. It will indicate pass/fail status as well as reasons in the case of
a failure.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.9
adGenEasyBridgeRowStatus
For this row to go active all pertinent parameters must be set (see
individual parameter descriptions) as well as the agent must
be able to create a bridge or modify the selected bridge. If an activate
fails then the ad…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.10
adGenEasyBridgeRateControl AdGenBridgeRateControlr/w
Textual Convention: AdGenBridgeRateControl Enumeration
Type Values:
1rateControlOn
2rateControlOff
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.11
adGenEasyBridgeAddMemberPhyls
This object is a comma delimited string of ifIndices. This OID is referred
to when adGenEasyBridgeCreateOrModify is set to modify(2), which must be done
prior to setting this OID. Each ifIndex corresponds to a GenBridge…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.12
adGenEasyBridgeDeleteMemberPhyls
This object is a comma delimited string of ifIndices. This OID is referred
to when adGenEasyBridgeCreateOrModify is set to modify(2), which must be done
prior to setting this OID. Each ifIndex corresponds to a GenBridge…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.664.5.67.1.16.2.2.1.13

adGenBridgeBulkInstanceTable

table
.1.3.6.1.4.1.664.5.67.1.16.4.1 · 1 row entry · 1 columns
Open in standard view 
Table contains instances that are created when there is a request to a bulk bridge instance.
adGenBridgeBulkInstanceEntry entry .1.3.6.1.4.1.664.5.67.1.16.4.1.1
Index is the slot number.
Indexes
ADTRAN-GENSLOT-MIBadGenSlotInfoIndex
Column Syntax OID
adGenBridgeBulkInstance
Used to index the TlV table; Each time this is called by slot it
creates an instance for that viewer. Once an instance is created, it may
be found by doing a get on adTa5kTlvBySlotInstance with the instance
number
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.664.5.67.1.16.4.1.1.1