ADTRAN-AOS-3G Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
27
.1.3.6.1.4.1.664.5.53.6.2.1 · 1 row entry · 16 columns
The table contains 3G cellular statistical data for the cellular
interface.
adGenAOS3GEntry entry .1.3.6.1.4.1.664.5.53.6.2.1.1
This is an entry into the 3G table.
Indexes
IF-MIBifIndex
Column Syntax OID
adGenAOS3GNetworkAccessID
The Network Access ID is the User ID submitted by the 3G
Modem during Mobile IP authentication. For more information,
refer to RFC 4282.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.1.1.1
adGenAOS3GHASS
This OID displays whether the shared secret for the home
agent has been set for Mobile IP authentication.
Bits
Enumerated Values:
0unset
1set
.1.3.6.1.4.1.664.5.53.6.2.1.1.2
adGenAOS3GHASPI
The Home Agent Security Parameter Index uniquely identifies a
security association for the home agent for use during Mobile
IP authentication.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.5.53.6.2.1.1.3
adGenAOS3GAAASS
This OID displays whether the shared secret for AAA
has been set for Mobile IP authentication.
Bits
Enumerated Values:
0unset
1set
.1.3.6.1.4.1.664.5.53.6.2.1.1.4
adGenAOS3GAAASPI
The AAA Security Parameter Index uniquely identifies a
security association for AAA for use during Mobile IP
authentication.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.5.53.6.2.1.1.5
adGenAOS3GReverseTunneling
This OID describes if a tunnel is setup from the
3G module's care of address to the home agent. A care of
address is a temporary IP address for a mobile device.
Bits
Enumerated Values:
0unset
1set
.1.3.6.1.4.1.664.5.53.6.2.1.1.6
adGenAOS3GHomeAddress
The permanent home IP address for the 3G
module in the cellular network.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.664.5.53.6.2.1.1.7
adGenAOS3GPrimaryHomeAddress
The primary IP address of the 3G module's home agent.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.664.5.53.6.2.1.1.8
adGenAOS3GSecHomeAddress
The secondary IP address of the 3G module's home agent.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.664.5.53.6.2.1.1.9
adGenAOS3GRSSI
The Receive Signal Strength Indicator for the cellular
connection. This value is a measurement of signal strength.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.5.53.6.2.1.1.10
adGenAOS3GECIO
The Ec/Io for the cellular connection. This is the ratio of
received pilot energy to the total received energy. The value
is similar to signal-to-noise ratio.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.1.1.11
adGenAOS3GPnOffset
The Pn Offset for the cellular connection. Base stations
assigned to a particular frequency carrier operate at the same
center frequency. The PN offset is used to distinguish base
stations from one another.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.5.53.6.2.1.1.12
adGenAOS3GServiceType
The current Cellular Service Type for
the cellular connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.1.1.13
adGenAOS3GServiceTypePreference
The current Cellular Service Type Preference for the cellular
connection. Cellular Service Type can be forced to 1xRTT mode
or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode
which chooses the best availabl…
Enumerationr/w
Enumerated Values:
4modeAUTO
9mode1xRTT
10mode1xEVDO
.1.3.6.1.4.1.664.5.53.6.2.1.1.14
adGenAOS3GConnectionState
The current Connection State for the cellular connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.1.1.15
adGenAOS3GECIOIntegerValue
The Ec/Io for the cellular connection displayed in integer
form. This is the ratio of received pilot energy to the total
received energy. The value is similar to signal-to-noise ratio.
EC/IO values typically are represe…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.664.5.53.6.2.1.1.16
.1.3.6.1.4.1.664.5.53.6.2.2 · 1 row entry · 8 columns
The table contains profile information
for the 3G cellular interface.
adGenAOS3GHardwareDataEntry entry .1.3.6.1.4.1.664.5.53.6.2.2.1
This is an entry into the 3G hardware data table.
Indexes
IF-MIBifIndex
Column Syntax OID
adGenAOS3GSystemID
The System Identification number is the identifier
for a cellular network in a certain area.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.5.53.6.2.2.1.1
adGenAOS3GNetworkID
The Network Identification number identifies a subset
of a particular SID corresponding to different networks.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.2.1.2
adGenAOS3GPrefferedRoamList
The PRL is a database of cell towers that the cellular modem
can roam on. This OID specifies the current version of
that database that is programmed onto the cellular modem.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.664.5.53.6.2.2.1.3
adGenAOS3GMobileDirNumber
The MDN is the 10 digit phone number assigned to
the 3G module.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.2.1.4
adGenAOS3GESN
The Electronic Serial Number is is a unique
number that identifies the 3G module.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.2.1.5
adGenAOS3GMobileStationID
The MSID is a 10 digit number that identifies
the 3G module in the network.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.2.1.6
adGenAOS3GHardwareVersion
The hardware version of the 3G modem.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.2.1.7
adGenAOS3GFirmwareVersion
The firmware version of the 3G modem.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.664.5.53.6.2.2.1.8
.1.3.6.1.4.1.664.5.53.6.2.3 · 1 row entry · 3 columns
The table contains settings regarding whether the trap is enabled
and threshold values for certain traps.
adGenAOS3GThresholdDataEntry entry .1.3.6.1.4.1.664.5.53.6.2.3.1
This is an entry into the 3G threshold data table.
Indexes
IF-MIBifIndex
Column Syntax OID
adGenAOS3GEnableTraps
This OID indicates whether traps
are enabled for the interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.664.5.53.6.2.3.1.1
adGenAOS3GRSSIThreshold
This is a value from (-200..200) that sets the threshold for
an RSSI trap to occur. When the RSSI is below this value, it
will cause an RSSI alarm trap. When the RSSI rises above this
value, it will cause an RSSI clea…
Integer32r/w
Constraints:
range: -200-200
.1.3.6.1.4.1.664.5.53.6.2.3.1.2
adGenAOS3GECIOThreshold
This is a value from (-200..200) that sets the threshold for
an ECIO trap to occur. When the ECIO is below this value, it
will cause an ECIO alarm trap. When the ECIO rises above this
value, it will cause an ECIO clea…
Integer32r/w
Constraints:
range: -200-200
.1.3.6.1.4.1.664.5.53.6.2.3.1.3