adGenAOS3GECIOIntegerValue

ADTRAN-AOS-3G · .1.3.6.1.4.1.664.5.53.6.2.1.1.16
MIB view Table view

Object

column SNMPv2-SMIInteger32 
The Ec/Io for the cellular connection displayed in integer
form. This is the ratio of received pilot energy to the total
received energy. The value is similar to signal-to-noise ratio.
EC/IO values typically are represented as a value with a
decimal place. In this representation the value will be
scaled by 10.  Hence a value of 1.5 will be represented as 15.

Context

MIB
ADTRAN-AOS-3G
OID
.1.3.6.1.4.1.664.5.53.6.2.1.1.16
Type
column
Access
readonly
Status
current
Parent
adGenAOS3GEntry
Table
adGenAOS3GTable
Siblings
15

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
adGenAOS3GNetworkAccessID
The Network Access ID is the User ID submitted by the 3G Modem during Mobile IP authentication. For more information, refer to RFC 4282.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.53.6.2.1.1.1
adGenAOS3GRSSI
The Receive Signal Strength Indicator for the cellular connection. This value is a measurement of signal strength.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.53.6.2.1.1.10
adGenAOS3GECIO
The Ec/Io for the cellular connection. This is the ratio of received pilot energy to the total received energy. The value is similar to signal-to-noise ratio.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.53.6.2.1.1.11
adGenAOS3GPnOffset
The Pn Offset for the cellular connection. Base stations assigned to a particular frequency carrier operate at the same center frequency. The PN offset is used to distinguish ba…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.664.5.53.6.2.1.1.12
adGenAOS3GServiceType
The current Cellular Service Type for the cellular connection.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.53.6.2.1.1.13
adGenAOS3GServiceTypePreference
The current Cellular Service Type Preference for the cellular connection. Cellular Service Type can be forced to 1xRTT mode or 1xEVDO mode. By default, it is set to Hybrid or AU…
columnEnumeration.1.3.6.1.4.1.664.5.53.6.2.1.1.14
adGenAOS3GConnectionState
The current Connection State for the cellular connection.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.664.5.53.6.2.1.1.15
adGenAOS3GHASS
This OID displays whether the shared secret for the home agent has been set for Mobile IP authentication.
columnBits.1.3.6.1.4.1.664.5.53.6.2.1.1.2
adGenAOS3GHASPI
The Home Agent Security Parameter Index uniquely identifies a security association for the home agent for use during Mobile IP authentication.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.6.2.1.1.3
adGenAOS3GAAASS
This OID displays whether the shared secret for AAA has been set for Mobile IP authentication.
columnBits.1.3.6.1.4.1.664.5.53.6.2.1.1.4
adGenAOS3GAAASPI
The AAA Security Parameter Index uniquely identifies a security association for AAA for use during Mobile IP authentication.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.664.5.53.6.2.1.1.5
adGenAOS3GReverseTunneling
This OID describes if a tunnel is setup from the 3G module's care of address to the home agent. A care of address is a temporary IP address for a mobile device.
columnBits.1.3.6.1.4.1.664.5.53.6.2.1.1.6
adGenAOS3GHomeAddress
The permanent home IP address for the 3G module in the cellular network.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.5.53.6.2.1.1.7
adGenAOS3GPrimaryHomeAddress
The primary IP address of the 3G module's home agent.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.5.53.6.2.1.1.8
adGenAOS3GSecHomeAddress
The secondary IP address of the 3G module's home agent.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.664.5.53.6.2.1.1.9