adGenAOS3GServiceTypePreference
ADTRAN-AOS-3G ·
.1.3.6.1.4.1.664.5.53.6.2.1.1.14
Object
column
r/w
Enumeration
The current Cellular Service Type Preference for the cellular connection. Cellular Service Type can be forced to 1xRTT mode or 1xEVDO mode. By default, it is set to Hybrid or AUTO mode which chooses the best available signal.
Context
- MIB
- ADTRAN-AOS-3G
- OID
.1.3.6.1.4.1.664.5.53.6.2.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- adGenAOS3GEntry
- Table
- adGenAOS3GTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
4 | modeAUTO |
9 | mode1xRTT |
10 | mode1xEVDO |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adGenAOS3GNetworkAccessID The Network Access ID is the User ID submitted by the 3G
Modem during Mobile IP authentication. For more information,
refer to RFC 4282. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.53.6.2.1.1.1 |
| adGenAOS3GRSSI The Receive Signal Strength Indicator for the cellular
connection. This value is a measurement of signal strength. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.53.6.2.1.1.10 |
| adGenAOS3GECIO The Ec/Io for the cellular connection. This is the ratio of
received pilot energy to the total received energy. The value
is similar to signal-to-noise ratio. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.53.6.2.1.1.11 |
| adGenAOS3GPnOffset The Pn Offset for the cellular connection. Base stations
assigned to a particular frequency carrier operate at the same
center frequency. The PN offset is used to distinguish ba… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.53.6.2.1.1.12 |
| adGenAOS3GServiceType The current Cellular Service Type for
the cellular connection. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.53.6.2.1.1.13 |
| adGenAOS3GConnectionState The current Connection State for the cellular connection. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.664.5.53.6.2.1.1.15 |
| adGenAOS3GECIOIntegerValue The Ec/Io for the cellular connection displayed in integer
form. This is the ratio of received pilot energy to the total
received energy. The value is similar to signal-to-noise r… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.664.5.53.6.2.1.1.16 |
| adGenAOS3GHASS This OID displays whether the shared secret for the home
agent has been set for Mobile IP authentication. | column | Bits | .1.3.6.1.4.1.664.5.53.6.2.1.1.2 |
| adGenAOS3GHASPI The Home Agent Security Parameter Index uniquely identifies a
security association for the home agent for use during Mobile
IP authentication. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.6.2.1.1.3 |
| adGenAOS3GAAASS This OID displays whether the shared secret for AAA
has been set for Mobile IP authentication. | column | Bits | .1.3.6.1.4.1.664.5.53.6.2.1.1.4 |
| adGenAOS3GAAASPI The AAA Security Parameter Index uniquely identifies a
security association for AAA for use during Mobile IP
authentication. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.664.5.53.6.2.1.1.5 |
| adGenAOS3GReverseTunneling This OID describes if a tunnel is setup from the
3G module's care of address to the home agent. A care of
address is a temporary IP address for a mobile device. | column | Bits | .1.3.6.1.4.1.664.5.53.6.2.1.1.6 |
| adGenAOS3GHomeAddress The permanent home IP address for the 3G
module in the cellular network. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.664.5.53.6.2.1.1.7 |
| adGenAOS3GPrimaryHomeAddress The primary IP address of the 3G module's home agent. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.664.5.53.6.2.1.1.8 |
| adGenAOS3GSecHomeAddress The secondary IP address of the 3G module's home agent. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.664.5.53.6.2.1.1.9 |