A3COM-SWITCHING-SYSTEMS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
27
Rows
27
Columns
248

a3ComSysSystemLogTable

table mandatory
.1.3.6.1.4.1.43.29.4.1.27.4 · 1 row entry · 5 columns
Open in standard view 
This table provides information on recorded system events.
a3ComSysSystemLogEntry entry .1.3.6.1.4.1.43.29.4.1.27.4.1
A system log entry.
Indexes
a3ComSysSystemLogIndex
Column Syntax OID
a3ComSysSystemLogIndex mandatory
The index of the log entry relative to this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.1.27.4.1.1
a3ComSysSystemLogSeverityLevel mandatory
Indicates the severity level of the log entry.
Enumeration
Enumerated Values:
1information
2warning
3error
4fatal
 .1.3.6.1.4.1.43.29.4.1.27.4.1.2
a3ComSysSystemLogDateTime mandatory
Indicates the date and time of the log event and is formatted
as follows: MM:DD:YY HH:MM:SS.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.1.27.4.1.3
a3ComSysSystemLogFacility mandatory
The facility which entered the event in the log. fcmlmm(6) represents
those events which may be common to the Lanplex Management Module
(LMM) and the FDDI Concentrator Module (FCM). lmmfddi(6) represents
those events …
Enumeration
Enumerated Values:
1exception
2operatingSystem
3assertion
4spanningTree
5fcmlmm
6lmmfddi
7lmmboard
8esm
9trsm
10efsm
11fsm
12hsi
 .1.3.6.1.4.1.43.29.4.1.27.4.1.4
a3ComSysSystemLogMessage mandatory
The recorded log message.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.1.27.4.1.5

a3ComSysSlotTable

table mandatory
.1.3.6.1.4.1.43.29.4.2.2 · 1 row entry · 13 columns
Open in standard view 
A list of slot entries.  A single entry exists in this
list for each slot in the chassis.
a3ComSysSlotEntry entry .1.3.6.1.4.1.43.29.4.2.2.1
A slot entry contains information about a particular
slot.
Indexes
a3ComSysSlotIndex
Column Syntax OID
a3ComSysSlotIndex mandatory
The index of the slot identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.2.2.1.1
a3ComSysSlotBoardType mandatory
The type of board residing in the slot identified by
this entry.
Enumeration
Enumerated Values:
1other
2emptyLocation
7esmBoard
8fcmBoard
9lmmBoard
10efsmBoard
11trsmBoard
12tmmBoard
13fsmBoard
14fesmBoard
 .1.3.6.1.4.1.43.29.4.2.2.1.2
a3ComSysSlotBoardRevision mandatory
The revision number of the board in the slot identified
by this entry. If the slot is empty, or the revision is
unknown this object returns a zero length string.
OctetString
Constraints:
range: 0-1
 .1.3.6.1.4.1.43.29.4.2.2.1.3
a3ComSysSlotBoardStatus mandatory
The status of the board in the slot identified by this
entry.
Enumeration
Enumerated Values:
1notPresent
2testing
3offline
4online
 .1.3.6.1.4.1.43.29.4.2.2.1.4
a3ComSysSlotBoardName mandatory
The text string describing the board in the slot
identified by this entry.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.43.29.4.2.2.1.5
a3ComSysSlotBoardNameAbbrev mandatory
The abbreviation used to describe the board in the slot
identified by this entry.
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.2.2.1.6
a3ComSysSlotEthernetPortCount mandatory
The count of ethernet ports in the slot identified by
this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.2.2.1.7
a3ComSysSlotFddiMacCount mandatory
The count of FDDI MACs in the slot identified by this
entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.2.2.1.8
a3ComSysSlotFddiPortCount mandatory
The count of FDDI ports in the slot identified by this
entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.2.2.1.9
a3ComSysSlotOvertemperature mandatory
This object indicates the current overtemperature status
for the slot. If the slot does not support overtemperature
detection, this object returns notSupported.
Enumeration
Enumerated Values:
1true
2false
3notSupported
 .1.3.6.1.4.1.43.29.4.2.2.1.10
a3ComSysSlotTokenRingPortCount mandatory
The count of TokenRing ports in the slot identified by this
entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.2.2.1.11
a3ComSysSlotBoardRevStr mandatory
This revision number of the board in the slot identified
by this entry. If the slot is empty, or the revision is
unknown this object returns a zero length string. The
format of the string is XX.YY, where the XX is the…
OctetString
Constraints:
range: 0-5
 .1.3.6.1.4.1.43.29.4.2.2.1.12
a3ComSysSlotConverterBad mandatory
This object indicates the current status +12V->+5V
converter for the slot. If the slot does not support
+12V->+5V converter detection, this object returns
notSupported.
Enumeration
Enumerated Values:
1true
2false
3notSupported
 .1.3.6.1.4.1.43.29.4.2.2.1.13

a3ComSysPowerSupplyStatusTable

table mandatory
.1.3.6.1.4.1.43.29.4.4.2 · 1 row entry · 3 columns
Open in standard view 
A list of power supply status entries.
a3ComSysPowerSupplyStatusEntry entry .1.3.6.1.4.1.43.29.4.4.2.1
A power supply status entry contains information about a
particular power supply.
Indexes
a3ComSysPowerSupplyStatusIndex
Column Syntax OID
a3ComSysPowerSupplyStatusIndex mandatory
The unique index of the power supply identified by this
entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.4.2.1.1
a3ComSysPowerSupplyStatus mandatory
This object represents the power supply status. The
value is a sum. It initially takes on the value 0, then
for each type which is active, 2 raised to a power is
added to the sum. The powers are according to the
follo…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.4.2.1.2
a3ComSysPowerSupplyStatusSupported mandatory
This object represents the various power supply status
types which are supported. The value is a sum. It
initially takes on the value 0, then for each type
which is supported, 2 raised to a power is added to the
sum.…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.4.2.1.3

a3ComSysSnmpInternalProxyTable

table mandatory
.1.3.6.1.4.1.43.29.4.5.7 · 1 row entry · 3 columns
Open in standard view 
A list of SNMP internal agent proxy entries.  An entry in
this table exists for each agent in the system that can be
reached by this agent via the internal proxy mechanism.
a3ComSysSnmpInternalProxyEntry entry .1.3.6.1.4.1.43.29.4.5.7.1
An entry identifies the communities available for
communicating with another agent in the system via the
internal proxy mechanism.
Indexes
a3ComSysSnmpInternalProxyAgentId a3ComSysSnmpInternalProxyAccessClass
Column Syntax OID
a3ComSysSnmpInternalProxyAgentId mandatory
The id of the agent identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.5.7.1.1
a3ComSysSnmpInternalProxyAccessClass mandatory
The access to MIB objects supported by the agent
identified by this entry provided by this agent, when
using the community string identified by the corresponding
value of a3ComSysSnmpInternalProxyCommunity.
Enumeration
Enumerated Values:
1readOnly
2readWrite
 .1.3.6.1.4.1.43.29.4.5.7.1.2
a3ComSysSnmpInternalProxyCommunity mandatory
A community which allows access to MIB objects supported
by the agent identified by this entry.
OctetString .1.3.6.1.4.1.43.29.4.5.7.1.3

a3ComSysAgentTrapDescriptionTable

table mandatory
.1.3.6.1.4.1.43.29.4.6.5 · 1 row entry · 3 columns
Open in standard view 
This table contains a listing of trap descriptions for
each trap supported by this agent.  This 
provides a relationship between a trap index, and the trap
enterprise oid and trap number for a given trap.  In all
cases except for the MIB-2 generic traps, the enterprise
under which a trap is defined is the same as that
appearing in the ENTERPRISE portion of the trap.
a3ComSysAgentTrapDescriptionTableEntry entry .1.3.6.1.4.1.43.29.4.6.5.1
Information relating a trap index to a specific trap
enterprise oid and trap number.
Indexes
a3ComSysAgentTrapDescriptionIndex
Column Syntax OID
a3ComSysAgentTrapDescriptionIndex mandatory
A unique index corresponding to the trap described by
this entry. This value of this object corresponding to
a particular trap will remain constant accross system
resets.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.6.5.1.1
a3ComSysAgentTrapEnterprise mandatory
The enterpise under which the trap identified by this
entry is defined.
ObjectIdentifier .1.3.6.1.4.1.43.29.4.6.5.1.2
a3ComSysAgentTrapNumber mandatory
The number of the trap identified by this entry, within
the enterprise where it is defined.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.6.5.1.3

a3ComSysAgentTrapDestinationTable

table mandatory
.1.3.6.1.4.1.43.29.4.6.6 · 1 row entry · 4 columns
Open in standard view 
This table contains information specifying which traps
will be transmitted to a given destination address.  The
table is indexed by the destination address type and
destination address.  Each entry in the table with a
status of valid identifies a set of traps which, when
generated, will be transmitted to the corresponding
destination address listed in that entry.
a3ComSysAgentTrapDestinationTableEntry entry .1.3.6.1.4.1.43.29.4.6.6.1
Information relating a set of traps and a destination
address to which each trap in ths set will be transmitted
when it is generated. To create a new entry, set a
non-existent instance of a3ComSysAgentTrapDestinationTr…
Indexes
a3ComSysAgentTrapDestinationAddressType a3ComSysAgentTrapDestinationAddress
Column Syntax OID
a3ComSysAgentTrapDestinationAddressType mandatory
The type of address identified by this entry.
Enumeration
Enumerated Values:
1ip
 .1.3.6.1.4.1.43.29.4.6.6.1.1
a3ComSysAgentTrapDestinationAddress mandatory
The address, of the type specified by the corresponding
value of a3ComSysAgentTrapDestinationAddressType, to which the
set of traps identified by this entry are to be
transmitted.
OctetString .1.3.6.1.4.1.43.29.4.6.6.1.2
a3ComSysAgentTrapDestinationTrapMask mandatory
This value is a bit string that indicates which traps
are enabled for the address identified by this entry.
The octet string value is treated as a 64-bit value. The
value is a sum. It initially takes on the value 0, t…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.43.29.4.6.6.1.3
a3ComSysAgentTrapDestinationEntryStatus mandatory
The status of the trap destination table entry. Setting
this object to invalid(1) has the effect of removing the
corresponding entry from the table.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.43.29.4.6.6.1.4

a3ComSysInterfaceLocationTable

table mandatory
.1.3.6.1.4.1.43.29.4.7.1 · 1 row entry · 6 columns
Open in standard view 
A list of interface location entries.  A single entry
exists in this list for each interface managed by this
agent.
a3ComSysInterfaceLocationEntry entry .1.3.6.1.4.1.43.29.4.7.1.1
An interface location entry describes the location of
a particular interface managed by this agent.
Indexes
a3ComSysInterfaceLocationIfIndex
Column Syntax OID
a3ComSysInterfaceLocationIfIndex mandatory
The value of the MIB-II ifIndex corresponding to the
interface identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.7.1.1.1
a3ComSysInterfaceLocationInterfaceType mandatory
The type of the physical implementation of the interface
identified by this entry.
Enumeration
Enumerated Values:
1other
2ethernetPort
3fddiMac
4tokenringPort
5atmPort
 .1.3.6.1.4.1.43.29.4.7.1.1.2
a3ComSysInterfaceLocationType mandatory
The type of location where the interface identified
by this entry is physically located.
Enumeration
Enumerated Values:
1other
2modularSlot
3chassis
4modularCard
 .1.3.6.1.4.1.43.29.4.7.1.1.3
a3ComSysInterfaceLocationTypeIndex mandatory
The index of the location identified by the corresponding
instance of a3ComSysInterfaceLocationType where the interface
identified by this entry is physically located.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.7.1.1.4
a3ComSysInterfaceLocationLocalIndex mandatory
The local index of the interface identified by
this entry relative to its type specified by the
corresponding value of a3ComSysInterfaceLocationInterfaceType,
and the location specified by the corresponding values
of a3…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.7.1.1.5
a3ComSysInterfaceLocationSystemModuleIndex mandatory
The system module index of the interface idnetified by
this entry. Ths index can be used to acquire the module
information from the s2SysModuleCardGroup and the
a3ComSysDiagnosticsGroup groups.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.7.1.1.6

a3ComSysEthernetPortTable

table mandatory
.1.3.6.1.4.1.43.29.4.8.2 · 1 row entry · 5 columns
Open in standard view 
A list of ethernet port entries.  A single entry exists
in this list for each ethernet port managed by this agent.
a3ComSysEthernetPortEntry entry .1.3.6.1.4.1.43.29.4.8.2.1
An ethernet port entry contains information about a
particular ethernet port managed by this agent.
Indexes
a3ComSysEthernetPortIndex
Column Syntax OID
a3ComSysEthernetPortIndex mandatory
The index of the ethernet port identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.2.1.1
a3ComSysEthernetPortIfIndex mandatory
The value of the MIB-II ifIndex corresponding to the
ethernet port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.2.1.2
a3ComSysEthernetPortLabel mandatory
An ASCII text string describing the ethernet port
identified by this entry.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.8.2.1.3
a3ComSysEthernetPortLinkStatus mandatory
The current value of the link status for the ethernet port
identified by this entry.
Enumeration
Enumerated Values:
1active
2inActive
 .1.3.6.1.4.1.43.29.4.8.2.1.4
a3ComSysEthernetPortType mandatory
Specific port type description for the ethernet port
identified by this entry.
Enumeration
Enumerated Values:
1rj2110BaseT
2rj4510BaseT
3st10BaseFL
4aui
5bnc10Base2
6other
7rj45100BaseT
8sc100BaseFx
9untermBnc10Base2
10sc1000BaseLxSm
11sc1000BaseLxMm
12sc1000BaseLxSmMm
13sc1000BaseLx10km
14sc1000BaseSx
15hssdc1000BaseCx
16db91000BaseCx
17gbicNotPresent
18gbic1000BaseCxDb9
19gbic1000BaseCxHssdc
20gbic1000BaseLx10Km
21gbic1000BaseLx
22gbic1000BaseSx
23rj451000BaseT
24port1000NotPresent
 .1.3.6.1.4.1.43.29.4.8.2.1.5

a3ComSysEthernetPortRateTable

table mandatory
.1.3.6.1.4.1.43.29.4.8.3 · 1 row entry · 9 columns
Open in standard view 
A list of ethernet port rate entries.  A single entry
exists in this list for each ethernet port, managed by
this agent, which supports rate information.
a3ComSysEthernetPortRateEntry entry .1.3.6.1.4.1.43.29.4.8.3.1
An ethernet port rate entry contains rate statistics for a
particular ethernet port managed by this agent. Rate
statistics are calculated based on a one second sampling
interval.
Indexes
a3ComSysEthernetPortRateIndex
Column Syntax OID
a3ComSysEthernetPortRateIndex mandatory
The index of the ethernet port identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.1
a3ComSysEthernetPortRateByteReceiveRate mandatory
The average number of bytes received per second by the
ethernet port identified by this entry during the most
recent sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.2
a3ComSysEthernetPortRatePeakByteReceiveRate mandatory
The peak value of a3ComSysEthernetPortRateByteReceiveRate
since the system was last initialized for the ethernet
port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.3
a3ComSysEthernetPortRateFrameReceiveRate mandatory
The average number of frames received per second by the
ethernet port identified by this entry during the most
recent sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.4
a3ComSysEthernetPortRatePeakFrameReceiveRate mandatory
The peak value of a3ComSysEthernetPortRateFrameReceiveRate
since the system was last initialized for the ethernet
port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.5
a3ComSysEthernetPortRateByteTransmitRate mandatory
The average number of bytes transmitted per second by the
ethernet port identified by this entry during the most
recent sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.6
a3ComSysEthernetPortRatePeakByteTransmitRate mandatory
The peak value of a3ComSysEthernetPortRateByteTransmitRate
since the system was last initialized for the ethernet
port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.7
a3ComSysEthernetPortRateFrameTransmitRate mandatory
The average number of frames transmitted per second by the
ethernet port identified by this entry during the most
recent sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.8
a3ComSysEthernetPortRatePeakFrameTransmitRate mandatory
The peak value of a3ComSysEthernetPortRateFrameTransmitRate
since the system was last initialized for the ethernet
port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.8.3.1.9

a3ComSysSmtFddiMacBeaconTable

table mandatory
.1.3.6.1.4.1.43.29.4.9.4 · 1 row entry · 3 columns
Open in standard view 
A list of FDDI MAC beacon entries.  A single entry exists
in this list for each FDDI MAC, managed by this agent,
which supports MAC beacon history.
a3ComSysSmtFddiMacBeaconEntry entry .1.3.6.1.4.1.43.29.4.9.4.1
An FDDI MAC beacon entry contains information about a
particular FDDI MAC's beacon history.
Indexes
a3ComSysSmtFddiMacBeaconSmtIndex a3ComSysSmtFddiMacBeaconIndex
Column Syntax OID
a3ComSysSmtFddiMacBeaconSmtIndex mandatory
The index of the SMT instance identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.4.1.1
a3ComSysSmtFddiMacBeaconIndex mandatory
The index of the FDDI MAC identified by this entry,
within the SMT identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.4.1.2
a3ComSysSmtFddiMacBeaconHistory mandatory
This object gives a history of the most recent beacon
information received on the FDDI MAC identified by this
entry. It can contain up to a maximum of eight records.
Each record is of the form:
source MAC: 6 bytes
…
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.43.29.4.9.4.1.3

a3ComSysSmtFddiMacRateTable

table mandatory
.1.3.6.1.4.1.43.29.4.9.5 · 1 row entry · 10 columns
Open in standard view 
A list of FDDI MAC rate entries.  A single entry exists
in this list for each FDDI MAC, managed by this agent,
which supports rate statistics.
a3ComSysSmtFddiMacRateEntry entry .1.3.6.1.4.1.43.29.4.9.5.1
An FDDI MAC rate entry contains rate statistics for a
particular FDDI MAC managed by this agent. Rate statistics
are calculated based on a one second sampling interval.
Indexes
a3ComSysSmtFddiMacRateSmtIndex a3ComSysSmtFddiMacRateIndex
Column Syntax OID
a3ComSysSmtFddiMacRateSmtIndex mandatory
The index of the SMT instance identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.1
a3ComSysSmtFddiMacRateIndex mandatory
The index of the FDDI MAC identified by this entry, within
the SMT identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.2
a3ComSysSmtFddiMacRateByteReceiveRate mandatory
The average number of bytes received per second by the
FDDI MAC identified by this entry during the most recent
sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.3
a3ComSysSmtFddiMacRatePeakByteReceiveRate mandatory
The peak value of a3ComSysSmtFddiMacByteReceiveRate since the
system was last initialized for the FDDI MAC identified by
this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.4
a3ComSysSmtFddiMacRateFrameReceiveRate mandatory
The average number of frames received per second by the
FDDI MAC identified by this entry during the most recent
sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.5
a3ComSysSmtFddiMacRatePeakFrameReceiveRate mandatory
The peak value of a3ComSysSmtFddiMacRateFrameReceiveRate since
the system was last initialized for the FDDI MAC identified
by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.6
a3ComSysSmtFddiMacRateByteTransmitRate mandatory
The average number of bytes transmitted per second by the
FDDI MAC identified by this entry during the most recent
sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.7
a3ComSysSmtFddiMacRatePeakByteTransmitRate mandatory
The peak value of a3ComSysSmtFddiMacByteTransmitRate since the
system was last initialized for the FDDI MAC identified by
this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.8
a3ComSysSmtFddiMacRateFrameTransmitRate mandatory
The average number of frames transmitted per second by
the FDDI MAC identified by this entry during the most
recent sampling period.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.9
a3ComSysSmtFddiMacRatePeakFrameTransmitRate mandatory
The peak value of a3ComSysSmtFddiMacFrameTransmitRate since the
system was last initialized for the FDDI MAC identified by
this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.5.1.10

a3ComSysSmtFddiPortTable

table mandatory
.1.3.6.1.4.1.43.29.4.9.6 · 1 row entry · 6 columns
Open in standard view 
A list of FDDI port entries.  A single entry exists in
this list for each FDDI port managed by this agent.
a3ComSysSmtFddiPortEntry entry .1.3.6.1.4.1.43.29.4.9.6.1
An FDDI port entry contains information about a particular
FDDI port managed by this agent.
Indexes
a3ComSysSmtFddiPortSmtIndex a3ComSysSmtFddiPortIndex
Column Syntax OID
a3ComSysSmtFddiPortSmtIndex mandatory
The index of the SMT instance identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.6.1.1
a3ComSysSmtFddiPortIndex mandatory
The index of the FDDI port identified by this entry,
within the SMT identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.6.1.2
a3ComSysSmtFddiPortLocationType mandatory
The type of location where the FDDI port identified by
this entry is physically located.
Enumeration
Enumerated Values:
1other
2modularSlot
3chassis
4modularCard
 .1.3.6.1.4.1.43.29.4.9.6.1.3
a3ComSysSmtFddiPortLocationTypeIndex mandatory
The index of the location identified by the corresponding
instance of a3ComSysSmtFddiPortLocationType where the FDDI port
identified by this entry is physically located.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.6.1.4
a3ComSysSmtFddiPortLocationLocalIndex mandatory
The local index of the FDDI port identified by this
entry relative to the location specified by the
corresponding values of a3ComSysSmtFddiPortLocationType and
a3ComSysSmtFddiPortLocationTypeIndex.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.6.1.5
a3ComSysSmtFddiPortLabel mandatory
An ASCII text string describing the FDDI port identified
by this entry.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.9.6.1.6

a3ComSysSmtFddiMacLocationTable

table mandatory
.1.3.6.1.4.1.43.29.4.9.7 · 1 row entry · 5 columns
Open in standard view 
An FDDI MAC Location table contains information to assign
an FDDI MAC to a different Location.  The system must be
rebooted after all changes to this table are completed
in order that the changes take effect.
a3ComSysSmtFddiMacLocationEntry entry .1.3.6.1.4.1.43.29.4.9.7.1
An FDDI MAC entry contains information to assign
an FDDI MAC to a different Location.
Indexes
a3ComSysSmtFddiMacLocationSmtIndex a3ComSysSmtFddiMacLocationIndex
Column Syntax OID
a3ComSysSmtFddiMacLocationSmtIndex mandatory
The index of the SMT instance identified by this entry,
relative to the agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.7.1.1
a3ComSysSmtFddiMacLocationIndex mandatory
The index of the FDDI MAC instance identified by this entry,
relative to the SMT identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.7.1.2
a3ComSysSmtFddiMacCurrentLocation mandatory
Indicates whether the MAC identified by this entry is assigned
to a backplane FDDI station (internal) or an FDDI station
configured on a module (external.)
Enumeration
Enumerated Values:
1internalBackplane
2externalFddiPort
 .1.3.6.1.4.1.43.29.4.9.7.1.3
a3ComSysSmtFddiMacRequestedLocation mandatory
The Location which the MAC identified by this entry is to
be assigned to during the next reboot.
Enumerationr/w
Enumerated Values:
1internalBackplane
2externalFddiPort
 .1.3.6.1.4.1.43.29.4.9.7.1.4
a3ComSysSmtFddiMacAvailableLocation mandatory
Indicates the Location(s) available for this MAC. A mac Location
which can be modified to either the interanl backplane or an
external FDDI port is indicated by internalOrExternal(3).
Enumeration
Enumerated Values:
1internalBackplane
2externalFddiPort
3internalOrExternal
 .1.3.6.1.4.1.43.29.4.9.7.1.5

a3ComSysSmtFddiMacStationTable

table mandatory
.1.3.6.1.4.1.43.29.4.9.8 · 1 row entry · 5 columns
Open in standard view 
An FDDI station MAC table contains information to assign
an FDDI MAC to an FDDI Station.  The system must be
rebooted after all changes to this table are completed 
in order that the changes take effect.
a3ComSysSmtFddiMacStationEntry entry .1.3.6.1.4.1.43.29.4.9.8.1
An FDDI MAC entry contains information to assign
an FDDI MAC to an FDDI Station.
Indexes
a3ComSysSmtFddiMacStationSmtIndex a3ComSysSmtFddiMacStationIndex
Column Syntax OID
a3ComSysSmtFddiMacStationSmtIndex mandatory
The index of the SMT instance identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.8.1.1
a3ComSysSmtFddiMacStationIndex mandatory
The index of the MAC instance identified by this entry,
relative to the SMT identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.8.1.2
a3ComSysSmtFddiMacCurrentStation mandatory
Indicates which FDDI station that the FDDI MAC identified
by this entry is assigned to. A value of 0 indicates
that the mac is assigned to an external station. Otherwise
the value represents the internal backplane stati…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.8.1.3
a3ComSysSmtFddiMacRequestedStation mandatory
Indicates which FDDI station the FDDI MAC identified
by this entry will be set to during the next system reboot.
A value of 0 indicates an external station. Otherwise the
value represents the internal backplane station …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.8.1.4
a3ComSysSmtFddiMacAvailableStations mandatory
This value is a sum. Setting of the first bit (LSB)
indicates that the MAC can be assigned to an external
station. Available backplane stations are indicated
by adding 2^StationNumber to the sum. Where StationNumber
re…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.8.1.5

a3ComSysSmtFddiPortStationTable

table mandatory
.1.3.6.1.4.1.43.29.4.9.9 · 1 row entry · 5 columns
Open in standard view 
An FDDI station Port table contains information to assign
an FDDI Port to an FDDI Station.  The system must be
rebooted after all changes to this table are completed 
in order that the changes take effect.
a3ComSysSmtFddiPortStationEntry entry .1.3.6.1.4.1.43.29.4.9.9.1
An FDDI Port entry contains information to assign
an FDDI Port to an FDDI Station.
Indexes
a3ComSysSmtFddiPortStationSmtIndex a3ComSysSmtFddiPortStationIndex
Column Syntax OID
a3ComSysSmtFddiPortStationSmtIndex mandatory
The index of the SMT instance identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.9.1.1
a3ComSysSmtFddiPortStationIndex mandatory
The index of the Port instance identified by this entry,
relative to the SMT indentified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.9.1.2
a3ComSysSmtFddiPortCurrentStation mandatory
Indicates which FDDI station the FDDI Port identified
by this entry is assigned to. A value of 0 indicates
that the Port is assigned to an external station. Otherwise
the value represents the internal backplane station …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.9.1.3
a3ComSysSmtFddiPortRequestedStation mandatory
Indicates which FDDI station the FDDI port identified
by this entry will be set to during the next system reboot.
A value of 0 indicates an external station. Otherwise the
value represents the internal backplane station…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.9.1.4
a3ComSysSmtFddiPortAvailableStations mandatory
This value is a sum. Setting of the first bit
indicates that the port can be assigned to an external
station. Available backplane stations are indicated
by adding 2^StationNumber to the sum. Where StationNumber
represe…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.9.9.1.5

a3ComSysBridgeTable

table mandatory
.1.3.6.1.4.1.43.29.4.10.2 · 1 row entry · 15 columns
Open in standard view 
A list of bridge entries.  A single entry exists in this
list for each bridge managed by this agent.
a3ComSysBridgeEntry entry .1.3.6.1.4.1.43.29.4.10.2.1
A bridge entry contains information about a particular
bridge managed by this agent.
Indexes
a3ComSysBridgeIndex
Column Syntax OID
a3ComSysBridgeIndex mandatory
The index of the bridge identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.2.1.1
a3ComSysBridgePortCount mandatory
The number of bridge ports that the bridge identified by
this entry controls.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.2.1.2
a3ComSysBridgeAddressTableSize mandatory
The size of the address table for the bridge identified
by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.2.1.3
a3ComSysBridgeAddressTableCount mandatory
The current count of addresses in the address table for
the bridge identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.2.1.4
a3ComSysBridgeAddressTablePeakCount mandatory
The peak count of addresses in the address table for the
bridge identified by this entry, since the system was last
initialized.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.2.1.5
a3ComSysBridgeAddressThreshold mandatory
A reporting threshold for the total number of addresses
known for the bridge identified by this entry. When this
threshold is reached, the event
a3ComSysBridgeAddressThresholdEvent is generated. The range of
valid val…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.2.1.6
a3ComSysBridgeMode mandatory
The operational mode of the bridge identified by this
entry. Note that bridges which report notSupported(3)
will not support sets of this object, and that the value
notSupported(3) is not a valid value for a set operat…
Enumerationr/w
Enumerated Values:
1expressMode
2ieee8021dBridgeMode
3notSupported
4ieee8021dSRTBridgeMode
5ieee8021dSRBridgeMode
6ibmSRBridgeMode
7srtBBridgeMode
8srExpressBridgeMode
 .1.3.6.1.4.1.43.29.4.10.2.1.7
a3ComSysBridgeBackbonePort mandatory
The number of the port selected as the backbone segment
port when the corresponding value of a3ComSysBridgeMode is
is expressMode(1). The value of this object can range
from 1 to the corresponding value of a3ComSysBrid…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.2.1.8
a3ComSysBridgeIpFragmentationEnabled mandatory
A flag indicating whether or not IP fragmentation is
enabled on this bridge. Note that bridges which report
notSupported(3) will not support sets of this object, and
that the value notSupported(3) is not a valid value …
Enumerationr/w
Enumerated Values:
1true
2false
3notSupported
 .1.3.6.1.4.1.43.29.4.10.2.1.9
a3ComSysBridgeTrFddiTranslationMode mandatory
The mode used to describe whether the embedded MAC
addresses are byte-conjugated in order to convert them
from Token Ring format to native FDDI format (and vice
versa), or whether they are left alone (used for traffic
f…
Enumerationr/w
Enumerated Values:
1native
2backbone
 .1.3.6.1.4.1.43.29.4.10.2.1.10
a3ComSysBridgeSTPGroupAddress mandatory
Spanning tree bridge group address. The address cannot be
changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.43.29.4.10.2.1.11
a3ComSysBridgeSTPEnable mandatory
This object indicates if spanning tree bridge feature is
enabled or disabled. If enabled this value will equal true(1).
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.43.29.4.10.2.1.12
a3ComSysBridgeIpxSnapTranslationEnable mandatory
This object indicates if the IPX 802.3-FDDI SNAP Translation
bridge feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
supported on all bridges.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.43.29.4.10.2.1.13
a3ComSysBridgeLowLatencyEnable mandatory
This object indicates if the bridge low latency
feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
supported on all bridges.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.43.29.4.10.2.1.14
a3ComSysBridgeVlanMode mandatory
This object indicates the VLAN types that this
bridge will support. Open mode means that each VLAN
within this bridge will be of the Open type; all VLANs
within this bridge will share the same address table.
Closed mod…
Enumerationr/w
Enumerated Values:
1open
2closed
3mixed
4notSupported
 .1.3.6.1.4.1.43.29.4.10.2.1.15

a3ComSysBridgePortTable

table mandatory
.1.3.6.1.4.1.43.29.4.10.3 · 1 row entry · 29 columns
Open in standard view 
A list of bridge port entries.  A single entry exists in
this list for each bridge port managed by this agent.
a3ComSysBridgePortEntry entry .1.3.6.1.4.1.43.29.4.10.3.1
A bridge port entry contains information about a
particular bridge port managed by this agent.
Indexes
a3ComSysBridgePortBridgeIndex a3ComSysBridgePortIndex
Column Syntax OID
a3ComSysBridgePortBridgeIndex mandatory
The index of the bridge identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.3.1.1
a3ComSysBridgePortIndex mandatory
The index of the bridge port identified by this entry,
within the bridge identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.3.1.2
a3ComSysBridgePortIfIndex mandatory
The value of the MIB-II ifIndex corresponding to the
bridge port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.3.1.3
a3ComSysBridgePortReceiveMulticastLimit mandatory
This variable limits the number of multicast frames forwarded
by this port over a 1 second interval. The minimum threshold
limit may vary between platforms, but can be determined by multiplying
this value by the a3ComS…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.43.29.4.10.3.1.4
a3ComSysBridgePortAddressAction mandatory
This object, when read, always returns the value
other(1). The behavior of setting this object to each of
the acceptable values is as follows:

freezeAddress: causes all the learned dynamic
addresse…
Enumerationr/w
Enumerated Values:
1other
2freezeAddress
3flushAddress
4flushDynamicAddress
 .1.3.6.1.4.1.43.29.4.10.3.1.5
a3ComSysBridgePortSpanningTreeFrameReceivedCounts mandatory
The number of spanning tree frames received by the
bridge port identified by this entry.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.6
a3ComSysBridgePortReceiveBlockedDiscards mandatory
The number of frames discarded by the bridge port
identified by this entry because the receiving bridge port
was not in the 'forwarding' state.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.7
a3ComSysBridgePortReceiveMulticastLimitExceededs mandatory
The number of times the value of
a3ComSysBridgePortReceiveMulticastLimit was exceeded for the
port identified by this entry.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.8
a3ComSysBridgePortReceiveMulticastLimitExceededDiscards mandatory
The number of multicast/broadcast frames discarded by the
bridge port identified by this entry because the
corresponding value of a3ComSysBridgePortReceiveMulticastLimit
was exceeded.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.9
a3ComSysBridgePortReceiveSecurityDiscards mandatory
The number of frames discarded by the bridge port
identified by this entry because they contained source
addresses which were statically configured on another
bridge port. A statically configured address (station),
whi…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.10
a3ComSysBridgePortReceiveUnknownDiscards mandatory
The number of frames discarded by the bridge port
identified by this entry because the destination address
was unknown. Note that this counter is only valid for
backbone ports, and only when the bridge is operating in
…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.11
a3ComSysBridgePortReceiveOtherDiscards mandatory
The number of frames discarded by the bridge port
identified by this entry because they contained either
invalid (group) source addresses or source addresses
belonging to this bridge (indicative of network loops).
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.12
a3ComSysBridgePortReceiveErrorDiscards mandatory
The number of frames discarded by the bridge port
identified by this entry because of internal bridge system
errors (e.g., hardware and software address table
discrepencies).
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.13
a3ComSysBridgePortSameSegmentDiscards mandatory
The number of frames discarded by the bridge port
identified by this entry because the destination address
is known on the same network segment as the source address,
i.e., the frame does not need to be bridged.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.14
a3ComSysBridgePortTransmitBlockedDiscards mandatory
The number of frames discarded by the bridge port
identified by this entry because the transmitting bridge
port was not in the 'forwarding' state.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.15
a3ComSysBridgePortReceiveAllPathFilteredFrames mandatory
The number of frames discarded by the bridge port
identified by this entry due to user defined receive all
path filters.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.16
a3ComSysBridgePortReceiveMulticastPathFilteredFrames mandatory
The number of frames discarded by the bridge port
identified by this entry due to user defined receive
multicast path filters.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.17
a3ComSysBridgePortTransmitAllPathFilteredFrames mandatory
The number of frames discarded by the bridge port
identified by this entry due to user defined transmit all
path filters.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.18
a3ComSysBridgePortTransmitMulticastPathFilteredFrames mandatory
The number of frames discarded by the bridge port
identified by this entry due to user defined transmit
multicast path filters.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.19
a3ComSysBridgePortForwardedUnicastFrames mandatory
The number of unicast frames which this port forwarded
to a single destination port.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.20
a3ComSysBridgePortForwardedUnicastOctets mandatory
The number of octets contained in unicast frames
which this port forwarded to a single destination port.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.21
a3ComSysBridgePortForwardedMulticastFrames mandatory
The number of multicast frames which this port forwarded.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.22
a3ComSysBridgePortForwardedMulticastOctets mandatory
The number of octets contained in multicast frames which
this port forwarded.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.23
a3ComSysBridgePortFloodedUnicastFrames mandatory
The number of unicast frames which this port flooded to
all other ports in the bridge.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.24
a3ComSysBridgePortFloodedUnicastOctets mandatory
The number of octets contained in unicast frames which
this port flooded to all other ports in the bridge.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.25
a3ComSysBridgePortStpMode mandatory
The mode of the bridge port.
Enumerationr/w
Enumerated Values:
1enable
2disable
3remove
 .1.3.6.1.4.1.43.29.4.10.3.1.26
a3ComSysBridgePortReceiveMulticastLimitFrameType mandatory
This object identifies the frames type(s) that are to be
counted when determining if the receive multicast limit
has been exceeded for this bridge port. Devices attached
to networks with predominantly high multicast tr…
Enumerationr/w
Enumerated Values:
1broadcastAndMulticast
2broadcastOnly
 .1.3.6.1.4.1.43.29.4.10.3.1.27
a3ComSysBridgePortForwardedFrames mandatory
The number of frames which this port forwarded.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.10.3.1.28
a3ComSysBridgePortReceiveMulticastLimitMultiplier mandatory
This variable determines the minimum setting for the multicast
limit threshold. For example if this value equals 1000, and the
a3ComSysBridgePortReceiveMulticastLimit variable equals 2 then
no more than 2000 multicast …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.3.1.29

a3ComSysBridgePortAddressTable

table mandatory
.1.3.6.1.4.1.43.29.4.10.5 · 1 row entry · 8 columns
Open in standard view 
A list of bridge port address information.  A single
entry exists in this list for each learned address,
accross all bridge ports and all bridges managed by this
agent.
a3ComSysBridgePortAddressEntry entry .1.3.6.1.4.1.43.29.4.10.5.1
An bridge port address entry contains information about a
particular bridge port address. To create a new entry,
set an instance of a3ComSysBridgePortAddressRemoteAddress with
the address index portion of the instance …
Indexes
a3ComSysBridgePortAddressBridgeIndex a3ComSysBridgePortAddressPortIndex a3ComSysBridgePortAddressIndex
Column Syntax OID
a3ComSysBridgePortAddressBridgeIndex mandatory
The index of the bridge identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.5.1.1
a3ComSysBridgePortAddressPortIndex mandatory
The index of the bridge port identified by this entry,
within the bridge identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.5.1.2
a3ComSysBridgePortAddressIndex mandatory
The index of this address entry within the bridge address
table for the bridge identified by this entry. This index
ranges from 1 to the corresponding value of
a3ComSysBridgeAddressTableSize.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.5.1.3
a3ComSysBridgePortAddressRemoteAddress mandatory
The remote MAC address detected on the bridge port
identified by to this entry. Setting this object results
in an attempt to create a new entry in the table. Since
the value of a3ComSysBridgePortAddressIndex is determ…
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.43.29.4.10.5.1.4
a3ComSysBridgePortAddressType mandatory
This object, when read, always returns the value valid(1).
Setting this object to invalid(2) will remove the
corresponding address entry from the table.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.43.29.4.10.5.1.5
a3ComSysBridgePortAddressIsStatic mandatory
A value indicating whether this MAC address was
statically configured or was dynamically learned. Note
that isStatic(1) it the only valid for set operations.
Enumerationr/w
Enumerated Values:
1isStatic
2isDynamic
 .1.3.6.1.4.1.43.29.4.10.5.1.6
a3ComSysBridgePortAddressStaticPort mandatory
If the corresponding value of the object
a3ComSysBridgePortAddressIsStatic is isStatic(1), this object
indicates the local bridge port index (as reported by
a3ComSysBridgePortLocalIndex) for which this address MAC was
…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.5.1.7
a3ComSysBridgePortAddressAge mandatory
This object indicates the time, in seconds, elapsed since
a packet containing this address as a source was last seen
on the bridge port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.10.5.1.8

a3ComSysNetworkAnalyzerTable

table mandatory
.1.3.6.1.4.1.43.29.4.12.1 · 1 row entry · 4 columns
Open in standard view 
A list of analyzer entries.  A single entry exists in this
list for each bridge port configured for an analyzer.
a3ComSysNetworkAnalyzerTableEntry entry .1.3.6.1.4.1.43.29.4.12.1.1
An analyzer table entry contains information relating an
analyzer port address to the bridge and port index for that
analyzer.

The effect of creating an entry for a particular port is
to configure that port…
Indexes
a3ComSysNetworkAnalyzerBridgeIndex a3ComSysNetworkAnalyzerBridgePortIndex
Column Syntax OID
a3ComSysNetworkAnalyzerBridgeIndex mandatory
The index of the bridge relative to this agent where the
analyzer identified by this entry is configured.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.12.1.1.1
a3ComSysNetworkAnalyzerBridgePortIndex mandatory
The index of the port relative to the bridge identified by
this entry where the analyzer identified by this entry is
configured.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.12.1.1.2
a3ComSysNetworkAnalyzerPhysicalAddress mandatory
The physical address of the bridge port identified by the
corresponding values of a3ComSysNetworkAnalyzerBridgeIndex and
a3ComSysNetworkAnayzerBridgePortIndex.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.43.29.4.12.1.1.3
a3ComSysNetworkAnalyzerStatus mandatory
The status of the entry. Setting the value of a non-existent
instance of this object to valid(1) attempts to add the
corresponding entry to the table. The effect of adding an
entry to the table is to configure the por…
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.43.29.4.12.1.1.4

a3ComSysNetworkPortMonitorTable

table mandatory
.1.3.6.1.4.1.43.29.4.12.2 · 1 row entry · 4 columns
Open in standard view 
A list of monitor port entries.  A single entry exists in
this for each bridge port being monitored.
a3ComSysNetworkPortMonitorTableEntry entry .1.3.6.1.4.1.43.29.4.12.2.1
A port monitor table entry contains information relating a
bridge port being monitored with the address of the analyzer
which is being used to monitor the port.

The effect of creating an entry for a particu…
Indexes
a3ComSysNetworkPortMonitorBridgeIndex a3ComSysNetworkPortMonitorBridgePortIndex
Column Syntax OID
a3ComSysNetworkPortMonitorBridgeIndex mandatory
The index of the bridge relative to this agent where the
monitored port identified by this entry is located.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.12.2.1.1
a3ComSysNetworkPortMonitorBridgePortIndex mandatory
The index of the port which is being monitored relative to
the bridge identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.12.2.1.2
a3ComSysNetworkPortMonitorAnalyzerAddress mandatory
The physical address of the port where the analyzer,
which is monitoring the port identified by this entry, is
located. Setting the value of a non-existent instance of
this object attempts to add an entry to the table.…
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.43.29.4.12.2.1.3
a3ComSysNetworkPortMonitorStatus mandatory
The status of the entry. Setting an existing instance
of this object to invalid(2) attempts to remove the
corresponding entry from the table. The effect of removing
an entry from the table is to disable monitoring of …
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.43.29.4.12.2.1.4

a3ComSysTokenRingPortTable

table mandatory
.1.3.6.1.4.1.43.29.4.13.2 · 1 row entry · 24 columns
Open in standard view 
A list of token ring port entries.  A single entry exists
in this list for each token ring port managed by this agent.
a3ComSysTokenRingPortEntry entry .1.3.6.1.4.1.43.29.4.13.2.1
A token ring port entry contains information about a
particular token ring port managed by this agent.
Indexes
a3ComSysTokenRingPortIndex
Column Syntax OID
a3ComSysTokenRingPortIndex mandatory
The index of the token ring port identified by this entry,
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.13.2.1.1
a3ComSysTokenRingPortIfIndex mandatory
The value of the MIB-II ifIndex corresponding to the
token ring port identified by this entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.13.2.1.2
a3ComSysTokenRingPortLabel mandatory
An ASCII text string describing the token ring port
identified by this entry.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.43.29.4.13.2.1.3
a3ComSysTokenRingPortInsertStatus mandatory
The current value of the link status for the token ring port
identified by this entry.
Enumeration
Enumerated Values:
1inserted
2deinserted
 .1.3.6.1.4.1.43.29.4.13.2.1.4
a3ComSysTokenRingPortType mandatory
Specific port type description for the token ring port
identified by this entry.
Enumeration
Enumerated Values:
1rj45
2other
 .1.3.6.1.4.1.43.29.4.13.2.1.5
a3ComSysTokenRingPortMode mandatory
The current mode of the port. The default mode (station) is
used to connect a hub to the port. Lobe mode is used to direct
connect a Token Ring station into the port. This selection
can only be made on ports 1 and 2 o…
Enumerationr/w
Enumerated Values:
1station
2lobe
 .1.3.6.1.4.1.43.29.4.13.2.1.6
a3ComSysTokenRingPortSpeed mandatory
The current speed of the port. The default speed is
sixteenMegabit.
Enumerationr/w
Enumerated Values:
1fourMegabit
2sixteenMegabit
3sixteenMegabitETR
 .1.3.6.1.4.1.43.29.4.13.2.1.7
a3ComSysTokenRingPortLineErrors mandatory
This counter is incremented when a frame
or token is copied or repeated by a
station, the E bit is zero in the frame
or token and one of the following
conditions exists: 1) there is a
non-data bit (J or K bit) between t…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.8
a3ComSysTokenRingPortBurstErrors mandatory
This counter is incremented when a station
detects the absence of transitions for five
half-bit timers (burst-five error).
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.9
a3ComSysTokenRingPortACErrors mandatory
This counter is incremented when a station
receives an AMP or SMP frame in which A is
equal to C is equal to 0, and then receives
another SMP frame with A is equal to C is
equal to 0 without first receiving an AMP
frame…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.10
a3ComSysTokenRingPortAbortTransErrors mandatory
This counter is incremented when a station
transmits an abort delimiter while
transmitting.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.11
a3ComSysTokenRingPortInternalErrors mandatory
This counter is incremented when a station
recognizes an internal error.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.12
a3ComSysTokenRingPortLostFrameErrors mandatory
This counter is incremented when a station
is transmitting and its TRR timer expires.
This condition denotes a condition where a
transmitting station in strip mode does not
receive the trailer of the frame before the
TR…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.13
a3ComSysTokenRingPortReceiveCongestionErrors mandatory
This counter is incremented when a station
recognizes a frame addressed to its
specific address, but has no available
buffer space indicating that the station
is congested.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.14
a3ComSysTokenRingPortFrameCopiedErrors mandatory
This counter is incremented when a station
recognizes a frame addressed to its
specific address and detects that the FS
field A bits are set to 1 indicating a
possible line hit or duplicate address.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.15
a3ComSysTokenRingPortTokenErrors mandatory
This counter is incremented when a station
acting as the active monitor recognizes an
error condition that needs a token
transmitted.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.16
a3ComSysTokenRingPortSoftErrors mandatory
The number of Soft Errors the interface
has detected. It directly corresponds to
the number of Report Error MAC frames
that this interface has transmitted.
Soft Errors are those which are
recoverable by the MAC layer pr…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.17
a3ComSysTokenRingPortHardErrors mandatory
The number of times this interface has
detected an immediately recoverable
fatal error. It denotes the number of
times this interface is either
transmitting or receiving beacon MAC
frames.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.18
a3ComSysTokenRingPortTransmitBeacons mandatory
The number of times this interface has
transmitted a beacon frame.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.19
a3ComSysTokenRingPortLobeWires mandatory
The number of times the interface has
detected an open or short circuit in the
lobe data path. The adapter will be closed
when this condition occurs.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.20
a3ComSysTokenRingPortRemoves mandatory
The number of times the interface has
received a Remove Ring Station MAC frame
request. When this frame is received
the interface will enter the close state.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.21
a3ComSysTokenRingPortSingles mandatory
The number of times the interface has
sensed that it is the only station on the
ring. This will happen if the interface
is the first one up on a ring, or if
there is a hardware problem.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.22
a3ComSysTokenRingPortFreqErrors optional
The number of times the interface has
detected that the frequency of the
incoming signal differs from the expected
frequency.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.13.2.1.23
a3ComSysTokenRingPortRingStatus mandatory
The current interface status which can
be used to diagnose fluctuating problems
that can occur on token rings, after a
station has successfully been added to
the ring.
Before an open is completed, this
object has the v…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.13.2.1.24

a3ComSysFtTable

table mandatory
.1.3.6.1.4.1.43.29.4.14.1 · 1 row entry · 18 columns
Open in standard view 
A list of entries which describe file transfers.
a3ComSysFtTableEntry entry .1.3.6.1.4.1.43.29.4.14.1.1
A description of a particular file transfer entry.
Indexes
a3ComSysFtIndex
Column Syntax OID
a3ComSysFtIndex mandatory
A unique index used to identifying this entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.43.29.4.14.1.1.1
a3ComSysFtDirection mandatory
Specifies the direction of the file transfer.
Enumerationr/w
Enumerated Values:
1localToRemote
2remoteToLocal
 .1.3.6.1.4.1.43.29.4.14.1.1.2
a3ComSysFtLocalStorageType mandatory
The type of storage on the local system to be
used as the source/destination for the file transfer.
A3ComSysStorageTyper/w
Textual Convention: A3ComSysStorageType Integer32
Type Constraints:
range: 1..3
 .1.3.6.1.4.1.43.29.4.14.1.1.3
a3ComSysFtLocalResourceType mandatory
The type of resource on the local system to be
used as the source/destination for the file transfer.
A3ComSysResourceTyper/w
Textual Convention: A3ComSysResourceType Integer32
Type Constraints:
range: 1..3
 .1.3.6.1.4.1.43.29.4.14.1.1.4
a3ComSysFtLocalResourceMask mandatory
The indices of the resources on the local system to
be used as the source/destination for the file transfer.
The type of resource to which these indices apply is
specified by the corresponding value of
a3ComSysFtLocalRe…
A3ComSysResourceBitMaskr/w
Textual Convention: A3ComSysResourceBitMask OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.29.4.14.1.1.5
a3ComSysFtLocalResourceAttribute mandatory
An identifier which specifies the particular resource
attribute on the local system which is the source/destination
of the file transfer. The resource(s) to which this attribute
applies is specified by the corresponding…
ObjectIdentifierr/w .1.3.6.1.4.1.43.29.4.14.1.1.6
a3ComSysFtRemoteAddressType mandatory
The type of address which is specified by the corresponding
value of a3ComSysFtRemoteAddress.
A3ComSysAddressTyper/w
Textual Convention: A3ComSysAddressType Integer32
Type Constraints:
range: 1..2
 .1.3.6.1.4.1.43.29.4.14.1.1.7
a3ComSysFtRemoteAddress mandatory
The address of the source/destination file on the remote
system.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.43.29.4.14.1.1.8
a3ComSysFtRemoteFileName mandatory
The full path name of the source/destination file on the
remote system.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.43.29.4.14.1.1.9
a3ComSysFtRemoteUserName mandatory
The user name to be used when requesting the file transfer
to/from the remote system.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.43.29.4.14.1.1.10
a3ComSysFtRemoteUserPassword mandatory
The password to be used when requesting the file transfer
to/from the remote system. When read, this object returns
a zero length string. Note that, for security reasons,
some ftp servers may insist on a non-zero length…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.43.29.4.14.1.1.11
a3ComSysFtForceTransfer mandatory
Setting this object to true makes the agent ignore
non-fatal (i.e. version/id mismatch) errors encountered
during a file transfer request.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.43.29.4.14.1.1.12
a3ComSysFtBytesTransferred mandatory
The number of bytes successfully transferred.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.43.29.4.14.1.1.13
a3ComSysFtStatus mandatory
The status of the file transfer.
Enumeration
Enumerated Values:
1statusSuccessfulCompletion
2statusInProgress
3statusLocalInvalid
4statusRemoteInvalid
5statusRemoteUnreachable
6statusUserAuthFailed
7statusFileNotFound
8statusFileTooBig
9statusFileIncompatible
10statusError
 .1.3.6.1.4.1.43.29.4.14.1.1.14
a3ComSysFtDetailedStatus mandatory
Detailed status for the transfer for the particular
local resource attribute specified by the corresponding
values of a3ComSysFtLocalStorageType, a3ComSysFtLocalResourceType,
a3ComSysFtLocalResourceMask, and a3ComSysFt…
ObjectIdentifier .1.3.6.1.4.1.43.29.4.14.1.1.15
a3ComSysFtDetailedStatusString mandatory
Detailed status description for the requested transfer.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.14.1.1.16
a3ComSysFtOwnerString mandatory
A string describing the creator/owner of this entry.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.43.29.4.14.1.1.17
a3ComSysFtRowStatus mandatory
The row status object controls the creation/deletion of rows
in this table. Its semantics are the same as those for the
RowStatus textual convention specified for SNMPv2.

Setting this object to createAnd…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.14.1.1.18

a3ComSysIpInterfaceTable

table mandatory
.1.3.6.1.4.1.43.29.4.15.2.2 · 1 row entry · 7 columns
Open in standard view 
A list of configured IP interfaces.
a3ComSysIpInterfaceEntry entry .1.3.6.1.4.1.43.29.4.15.2.2.1
An individual IP interface.
Indexes
a3ComSysIpInterfaceIpStackIndex a3ComSysIpInterfaceAddr a3ComSysIpInterfaceNetMask
Column Syntax OID
a3ComSysIpInterfaceIpStackIndex mandatory
The index of the IP stack identified by this entry
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.15.2.2.1.1
a3ComSysIpInterfaceAddr mandatory
The IP address of this entry within the IP stack identified
within this entry.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.29.4.15.2.2.1.2
a3ComSysIpInterfaceNetMask mandatory
The subnet mask associated with this IP interface. The value of the mask
is an IP address with all the network bits set to 1 and all the host bits
set to 0.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.29.4.15.2.2.1.3
a3ComSysIpInterfaceIndex mandatory
The index value which uniquely identifies the interface
to which this entry is applicable. lspIPInterfaceIndex maps to
the same interface as identified by ifIndex in the ifTable. Currently,
this object can not be modi…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.15.2.2.1.4
a3ComSysIpInterfaceBcastAddr mandatory
This object represents the value of the least significant
bit of this entry's direct broadcast address. For example,
a value of one signifies that the host portion of the broadcast
address is set to all ones.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.15.2.2.1.5
a3ComSysIpInterfaceCost mandatory
The route cost metric used for this entry.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.43.29.4.15.2.2.1.6
a3ComSysIpInterfaceStatus mandatory
The status column for this IP interface. This object can be set to:
createAndGo(4)
destroy(6)

The following value may be read:
active(1)

Setting this object to createAndGo(4) causes the ag…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.15.2.2.1.7

a3ComSysIpxInterfaceTable

table mandatory
.1.3.6.1.4.1.43.29.4.16.2.2 · 1 row entry · 6 columns
Open in standard view 
A list of configured IPX interfaces.
a3ComSysIpxInterfaceEntry entry .1.3.6.1.4.1.43.29.4.16.2.2.1
An individual IPX interface.
Indexes
a3ComSysIpxInterfaceIpxStackIndex a3ComSysIpxInterfaceNetNumber
Column Syntax OID
a3ComSysIpxInterfaceIpxStackIndex mandatory
The index of the IPX stack identified by this entry
relative to this agent.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.16.2.2.1.1
a3ComSysIpxInterfaceNetNumber mandatory
The IPX Network Number of this entry.
IpxNetworkNumber
Textual Convention: IpxNetworkNumber OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.43.29.4.16.2.2.1.2
a3ComSysIpxInterfaceIfIndex mandatory
The ifIndex of the virtual interface that this IPX interface is
is configured over. The a3ComSysIpxInterfaceIfIndex identifies a
virtual interface, for example a VLAN, that this local address
is associated with for pu…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.16.2.2.1.3
a3ComSysIpxInterfaceCost mandatory
The cost associated with the IPX address of this entry.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.16.2.2.1.4
a3ComSysIpxInterfaceFrameType mandatory
The frame format used for routing frames on this IPX interface. The framing
formats are for ethernet ports. There are two frame formats for FDDI ports:
802.2 and FDDI SNAP. The correct FDDI format is automatically ch…
Enumerationr/w
Enumerated Values:
1frame-ethernetII
2frame-802-2
3frame-802-3-Raw
4frame-SNAP
 .1.3.6.1.4.1.43.29.4.16.2.2.1.5
a3ComSysIpxInterfaceStatus mandatory
The status column for this IPX interface. This OBJECT can be set to:
createAndGo(4)
destroy(6)

The following value may be read:
active(1)

Setting this object ot createAndGo(4) causes the a…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.16.2.2.1.6

a3ComSysAtInterfaceTable

table mandatory
.1.3.6.1.4.1.43.29.4.17.2.2 · 1 row entry · 24 columns
Open in standard view 
A list of AppleTalk ports for this entity.
a3ComSysAtInterfaceEntry entry .1.3.6.1.4.1.43.29.4.17.2.2.1
An individual appletalk interface entry.
Appletalk entries with row status of active(1)
cannot be modified but must set to destroy(6)
and recreated.
Indexes
a3ComSysAtInterfaceAtStackIndex a3ComSysAtInterfaceIfIndex
Column Syntax OID
a3ComSysAtInterfaceAtStackIndex mandatory
The index of the Appletalk stack identified by this entry
relative to this agent.

Setting of this object is required for all interface creations.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.17.2.2.1.1
a3ComSysAtInterfaceNetAddress mandatory
The AppleTalk network address configured for this
port.
DdpNodeAddress
Textual Convention: DdpNodeAddress OctetString
Type Constraints:
range: 3
 .1.3.6.1.4.1.43.29.4.17.2.2.1.2
a3ComSysAtInterfaceType mandatory
The type of interface that is configured for this port.
Setting of this object is required for all interface creations.
Enumerationr/w
Enumerated Values:
1seedInterface
2nonseedInterface
 .1.3.6.1.4.1.43.29.4.17.2.2.1.3
a3ComSysAtInterfaceNetStart mandatory
The first AppleTalk network address in the range
configured for this port. If this port is not a
native AppleTalk port, this object shall have the
value of two octets of zero.
Setting of this object is mandatory only f…
ATNetworkNumberr/w
Textual Convention: ATNetworkNumber OctetString
Type Constraints:
range: 2
 .1.3.6.1.4.1.43.29.4.17.2.2.1.4
a3ComSysAtInterfaceNetEnd mandatory
The last AppleTalk network address in the range
configured for this port. If the network to which
this AppleTalk port is connected is a non-extended
network, or if it is not a native AppleTalk port,
the value for a3Com…
ATNetworkNumberr/w
Textual Convention: ATNetworkNumber OctetString
Type Constraints:
range: 2
 .1.3.6.1.4.1.43.29.4.17.2.2.1.5
a3ComSysAtInterfaceZoneDefault mandatory
The name of the default zone for this port. If
this port only has one zone, that zone is
represented here.

Setting of this object is mandatory for
interfaces with a3ComSysAtInterfaceType equal to seedInt…
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.6
a3ComSysAtInterfaceZone1 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.7
a3ComSysAtInterfaceZone2 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.8
a3ComSysAtInterfaceZone3 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.9
a3ComSysAtInterfaceZone4 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.10
a3ComSysAtInterfaceZone5 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.11
a3ComSysAtInterfaceZone6 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.12
a3ComSysAtInterfaceZone7 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.13
a3ComSysAtInterfaceZone8 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.14
a3ComSysAtInterfaceZone9 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.15
a3ComSysAtInterfaceZone10 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.16
a3ComSysAtInterfaceZone11 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.17
a3ComSysAtInterfaceZone12 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.18
a3ComSysAtInterfaceZone13 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.19
a3ComSysAtInterfaceZone14 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.20
a3ComSysAtInterfaceZone15 mandatory
Zone name in this entry's zone list.

This object may only only be set for interfaces
with a3ComSysAtInterfaceType equal to seedInterface(1).
ATNamer/w
Textual Convention: ATName OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.43.29.4.17.2.2.1.21
a3ComSysAtInterfaceIfIndex mandatory
The interface associated with this
AppleTalk port. The interface identified by a
particular value of this index is the same interface
as identified by the same value of ifIndex in the ifTable.

Setting o…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.17.2.2.1.22
a3ComSysAtInterfaceState mandatory
The current state of the appletalk interface.
Enumeration
Enumerated Values:
1unused
2initialize
3terminate
4failed
5down
6validate
7discover
8waiting
9enabled
 .1.3.6.1.4.1.43.29.4.17.2.2.1.23
a3ComSysAtInterfaceStatus mandatory
The status column for this IP interface. This object can be set to:
createAndGo(4)
createAndWait(5)
destroy(6)

The following value may be read:
active(1)
notInService(2)

Setting this objec…
RowStatusr/w
Textual Convention: RowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.43.29.4.17.2.2.1.24

a3ComSysModuleCardInfoTable

table mandatory
.1.3.6.1.4.1.43.29.4.18.2 · 1 row entry · 16 columns
Open in standard view 
A list of module card information entries.  A single entry exists in
this list for each modular component in the system.
a3ComSysModuleCardInfoEntry entry .1.3.6.1.4.1.43.29.4.18.2.1
A module card info entry contains information about a
particular modular component within the system.
Indexes
a3ComSysModuleCardInfoIndex
Column Syntax OID
a3ComSysModuleCardInfoIndex mandatory
The index of the modular component identified by this
entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.18.2.1.1
a3ComSysModuleCardInfoFamily mandatory
The family code for this module.
Enumeration
Enumerated Values:
1coreBuilder3500
2superStack7000
3superStack9000
17coreBuilder9000-RF12R
18coreBuilder9000-RF6MC
19coreBuilder9000-LF20R
20coreBuilder9000-LF10MC
21coreBuilder9000-LF36T
22coreBuilder9000-FG24
23coreBuilder9000-FG9
24coreBuilder9000-LG9MC
25coreBuilder9000-LG9
 .1.3.6.1.4.1.43.29.4.18.2.1.2
a3ComSysModuleCardInfoGenericType mandatory
The generic type code for this module.
Enumeration
Enumerated Values:
1backplaneOrMotherboard
2processorBoard
3enet10MbAnd100MbAdaptor
4enet1GbAdaptor
5fddiAdaptor
6atmAdaptor
 .1.3.6.1.4.1.43.29.4.18.2.1.3
a3ComSysModuleCardInfoSpecificType mandatory
The specific type code for this module.
Enumeration
Enumerated Values:
1notApplicable
161atmSonetOC3Fiber
162atmSonetOC12Fiber
163atmSonetOC3Copper
164atmSonetOC12Copper
177enet1Gb850nMMultimodeFiber
178enet1Gb1300nMFiber
179enet1GbCoax
180packetSwitchingFabric1000BaseBackplane
181enet1Gb1000BaseTx
183enet1000BaseSxMmfSCandGBIC
225enet100Mb100BaseTx
226enet10or100BaseTxTelco
227enet100Mb100BaseFx
228enet100Mb100BaseT4
229enet100Mb100BaseTxSTP
230enet100Mb100BaseT2
241fddiMultimodeSC
242fddiSingleModeSC
243fddiCopperUTP
244fddiCopperSTP
 .1.3.6.1.4.1.43.29.4.18.2.1.4
a3ComSysModuleCardInfoPartNumber mandatory
The specific part number for this module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.18.2.1.5
a3ComSysModuleCardInfoManufacturingDate mandatory
The date that this module was manufactured in the
format mm/dd/yyyy.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.18.2.1.6
a3ComSysModuleCardInfoModuleSerialNumber mandatory
3Com serial number.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.43.29.4.18.2.1.7
a3ComSysModuleCardInfoTLASerialNumber mandatory
TOP level assembly serial number for boards with
non-removable daughter cards. Null string for
all other board types.
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.43.29.4.18.2.1.8
a3ComSysModuleCardInfo3CNumber mandatory
On a backplane or non-removable module this is the
3C number of the chassis. On a removable module this
is the 3C number of the module.
OctetString
Constraints:
range: 10-10
 .1.3.6.1.4.1.43.29.4.18.2.1.9
a3ComSysModuleCardInfoICTTestStatus mandatory
1 equals test passed, or greater than 1 identifies the
test number failure (0 or FF indicates field yet not
written).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.18.2.1.10
a3ComSysModuleCardInfoICTTestRevision mandatory
Manufacturing ATE test revision number (XX.XX).
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.18.2.1.11
a3ComSysModuleCardInfoSystemTestStatus mandatory
1 equals test passed, or greater than 1 identifies the
test number failure (0 or FF indicates field yet not
written).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.18.2.1.12
a3ComSysModuleCardInfoFunctionalTestStatus mandatory
1 equals test passed, or greater than 1 identifies the
test number failure (0 or FF indicates field yet not
written).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.18.2.1.13
a3ComSysModuleCardInfoFunctionalTestRevision mandatory
Manufacturing functional test revision number (XX.XX).
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.18.2.1.14
a3ComSysModuleCardInfoBoardRevision mandatory
Board revision code.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.18.2.1.15
a3ComSysModuleCardInfoRuntimeHours mandatory
A total count of the number of hours this module has
been in operation.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.18.2.1.16

a3ComSysDiagnosticsInfoTable

table mandatory
.1.3.6.1.4.1.43.29.4.19.1 · 1 row entry · 8 columns
Open in standard view 
A list of module card information entries.  A single entry exists in
this list for each modular component in the system.
a3ComSysDiagnosticsInfoEntry entry .1.3.6.1.4.1.43.29.4.19.1.1
A diagnostics info entry contains information about a particular
diagnostics event on a modular component within the system.
Indexes
a3ComSysDiagnosticsInfoIndex
Column Syntax OID
a3ComSysDiagnosticsInfoIndex mandatory
The index of the diagnostics modular component identified by this
entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.19.1.1.1
a3ComSysDiagnosticsInfoPOVDiagnosticsRevision mandatory
The revision of the POV (power on verification) diagnostics
software at the most recent failure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.19.1.1.2
a3ComSysDiagnosticsInfoExtendedDiagnosticsRevision mandatory
The revision of the extended diagnostics software at the
most recent failure.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.19.1.1.3
a3ComSysDiagnosticsInfoDiagnosticFailureCode mandatory
The code written by the diagnostics at the most recent
failure. This identifies both the test number and failure
code in the following format: <testNumber>-<errorCode>.
If there is no failure then 000-000 is displaye…
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.19.1.1.4
a3ComSysDiagnosticsInfoDiagnosticFailureDateTime mandatory
The date and time of the most recent diagnostic failure
for the module.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.43.29.4.19.1.1.5
a3ComSysDiagnosticsInfoDiagnosticFailureSlotNumber mandatory
The slot number (network adapter cards only) of the most
recent diagnostic failure for the module.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.19.1.1.6
a3ComSysDiagnosticsInfoDiagnosticFailureCounter mandatory
The total number of diagnostic failures logged against this
module.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.19.1.1.7
a3ComSysDiagnosticsInfoDiagnosticFieldDOACounter mandatory
The total number of failures occurring at this module during
the first 48 hours of operation.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.43.29.4.19.1.1.8