a3ComSysBridgeMode

A3COM-SWITCHING-SYSTEMS-MIB · .1.3.6.1.4.1.43.29.4.10.2.1.7

MIB view Table view

Object

column mandatory r/w Enumeration

The operational mode of the bridge identified by this
entry.  Note that bridges which report notSupported(3)
will not support sets of this object, and that the value
notSupported(3) is not a valid value for a set operation.

Context

MIB: A3COM-SWITCHING-SYSTEMS-MIB
OID: .1.3.6.1.4.1.43.29.4.10.2.1.7
Type: column
Access: readwrite
Status: mandatory
Parent: a3ComSysBridgeEntry
Table: a3ComSysBridgeTable
Siblings: 14

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	expressMode
`2`	ieee8021dBridgeMode
`3`	notSupported
`4`	ieee8021dSRTBridgeMode
`5`	ieee8021dSRBridgeMode
`6`	ibmSRBridgeMode
`7`	srtBBridgeMode
`8`	srExpressBridgeMode

Related Objects

Sibling Objects

Object	Type	Syntax	OID
a3ComSysBridgeIndex mandatory The index of the bridge identified by this entry, relative to this agent.	column	Integer32	`.1.3.6.1.4.1.43.29.4.10.2.1.1`
a3ComSysBridgeTrFddiTranslationMode mandatory The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vice versa), or whether…	column	Enumeration	`.1.3.6.1.4.1.43.29.4.10.2.1.10`
a3ComSysBridgeSTPGroupAddress mandatory Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).	column	OctetString	`.1.3.6.1.4.1.43.29.4.10.2.1.11`
a3ComSysBridgeSTPEnable mandatory This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1).	column	Enumeration	`.1.3.6.1.4.1.43.29.4.10.2.1.12`
a3ComSysBridgeIpxSnapTranslationEnable mandatory This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be support…	column	Enumeration	`.1.3.6.1.4.1.43.29.4.10.2.1.13`
a3ComSysBridgeLowLatencyEnable mandatory This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.	column	Enumeration	`.1.3.6.1.4.1.43.29.4.10.2.1.14`
a3ComSysBridgeVlanMode mandatory This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs within this bridge will …	column	Enumeration	`.1.3.6.1.4.1.43.29.4.10.2.1.15`
a3ComSysBridgePortCount mandatory The number of bridge ports that the bridge identified by this entry controls.	column	Integer32	`.1.3.6.1.4.1.43.29.4.10.2.1.2`
a3ComSysBridgeAddressTableSize mandatory The size of the address table for the bridge identified by this entry.	column	Integer32	`.1.3.6.1.4.1.43.29.4.10.2.1.3`
a3ComSysBridgeAddressTableCount mandatory The current count of addresses in the address table for the bridge identified by this entry.	column	Integer32	`.1.3.6.1.4.1.43.29.4.10.2.1.4`
a3ComSysBridgeAddressTablePeakCount mandatory The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized.	column	Integer32	`.1.3.6.1.4.1.43.29.4.10.2.1.5`
a3ComSysBridgeAddressThreshold mandatory A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridgeAddressThresholdEve…	column	Integer32	`.1.3.6.1.4.1.43.29.4.10.2.1.6`
a3ComSysBridgeBackbonePort mandatory The number of the port selected as the backbone segment port when the corresponding value of a3ComSysBridgeMode is is expressMode(1). The value of this object can range from 1 to…	column	Integer32	`.1.3.6.1.4.1.43.29.4.10.2.1.8`
a3ComSysBridgeIpFragmentationEnabled mandatory A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this object, and that the val…	column	Enumeration	`.1.3.6.1.4.1.43.29.4.10.2.1.9`