a3ComSysBridgeAddressThreshold
A3COM-SWITCHING-SYSTEMS-MIB ·
.1.3.6.1.4.1.43.29.4.10.2.1.6
Object
column
mandatory
r/w
Integer32
A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is between 1 and the corresponding value reported by a3ComSysBridgeAddressTableSize + 1 (Note that this range applies to values issued in set requests. The current value may be outside this range, for example if the corresponding value of a3ComSysBridgeMode is changed). Setting this object to one greater than the address table size disables the generation of a3ComSysBridgeAddressThresholdEvents since the limit will never be reached.
Context
- MIB
- A3COM-SWITCHING-SYSTEMS-MIB
- OID
.1.3.6.1.4.1.43.29.4.10.2.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- a3ComSysBridgeEntry
- Table
- a3ComSysBridgeTable
- Siblings
- 14
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| a3ComSysBridgeIndex mandatory The index of the bridge identified by this entry,
relative to this agent. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.1 |
| a3ComSysBridgeTrFddiTranslationMode mandatory The mode used to describe whether the embedded MAC
addresses are byte-conjugated in order to convert them
from Token Ring format to native FDDI format (and vice
versa), or whether… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.10 |
| a3ComSysBridgeSTPGroupAddress mandatory Spanning tree bridge group address. The address cannot be
changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled). | column | OctetString | .1.3.6.1.4.1.43.29.4.10.2.1.11 |
| a3ComSysBridgeSTPEnable mandatory This object indicates if spanning tree bridge feature is
enabled or disabled. If enabled this value will equal true(1). | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.12 |
| a3ComSysBridgeIpxSnapTranslationEnable mandatory This object indicates if the IPX 802.3-FDDI SNAP Translation
bridge feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
support… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.13 |
| a3ComSysBridgeLowLatencyEnable mandatory This object indicates if the bridge low latency
feature is enabled or disabled. If enabled this
value will equal true(1). Note, this object may not be
supported on all bridges. | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.14 |
| a3ComSysBridgeVlanMode mandatory This object indicates the VLAN types that this
bridge will support. Open mode means that each VLAN
within this bridge will be of the Open type; all VLANs
within this bridge will … | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.15 |
| a3ComSysBridgePortCount mandatory The number of bridge ports that the bridge identified by
this entry controls. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.2 |
| a3ComSysBridgeAddressTableSize mandatory The size of the address table for the bridge identified
by this entry. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.3 |
| a3ComSysBridgeAddressTableCount mandatory The current count of addresses in the address table for
the bridge identified by this entry. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.4 |
| a3ComSysBridgeAddressTablePeakCount mandatory The peak count of addresses in the address table for the
bridge identified by this entry, since the system was last
initialized. | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.5 |
| a3ComSysBridgeMode mandatory The operational mode of the bridge identified by this
entry. Note that bridges which report notSupported(3)
will not support sets of this object, and that the value
notSupported(… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.7 |
| a3ComSysBridgeBackbonePort mandatory The number of the port selected as the backbone segment
port when the corresponding value of a3ComSysBridgeMode is
is expressMode(1). The value of this object can range
from 1 to… | column | Integer32 | .1.3.6.1.4.1.43.29.4.10.2.1.8 |
| a3ComSysBridgeIpFragmentationEnabled mandatory A flag indicating whether or not IP fragmentation is
enabled on this bridge. Note that bridges which report
notSupported(3) will not support sets of this object, and
that the val… | column | Enumeration | .1.3.6.1.4.1.43.29.4.10.2.1.9 |