atmfM4LoggedAlarmRepairAct

ATM-FORUM-SNMP-M4-MIB · broadbandforum variant · .1.3.6.1.4.1.353.5.1.3.1.1.42.1.5
Commands MIB view Table view

Object

column SNMPv2-TCDisplayString 
Indicates proposed repair actions reported by the agent
for the problem identified by the alarm.  If more than
one action is described in this object, the problem
descriptions are separated by newline characters.
              
This object is only present if it was included in the
alarm trap corresponding to this log entry.

Context

MIB
ATM-FORUM-SNMP-M4-MIB
OID
.1.3.6.1.4.1.353.5.1.3.1.1.42.1.5
Type
column
Access
readonly
Status
current
Parent
atmfM4LoggedAlarmEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-SNMP-M4-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-SNMP-M4-MIB::atmfM4LoggedAlarmRepairAct'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ATM-FORUM-SNMP-M4-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-SNMP-M4-MIB::atmfM4LoggedAlarmRepairAct.<atmfM4TrapLogSrc>.<atmfM4TrapLogType>.<atmfM4LoggedTrapIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ATM-FORUM-SNMP-M4-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ATM-FORUM-SNMP-M4-MIB::atmfM4LoggedAlarmRepairAct'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
atmfM4LoggedAlarmGroup
Compliance refinements
atmfM4Compliance noaccess
Support for this object is required only for a logged alarm
trap table entry whose corresponding alarm trap included the
atmfM4TrapAlarmRepairAct object.