ATM-FORUM-SNMP-M4-MIB
This MIB module is the SNMP version of the ATM Forum's
M4 interface (network element view).
- Source file
ATM-FORUM-SNMP-M4-MIB- Last revised
- Identity
atmfM4MIB- Base OID
1.3.6.1.4.1.353.5.1.3.1
Imported Objects
| ATM-MIB | atmVcCrossConnectEntry atmVcCrossConnectH2LOperStatus atmVcCrossConnectL2HOperStatus atmVclEntry atmVclOperStatus atmVclVci atmVclVpi atmVpCrossConnectEntry atmVpCrossConnectH2LOperStatus atmVpCrossConnectL2HOperStatus atmVplEntry atmVplOperStatus atmVplVpi |
| ENTITY-MIB | entPhysicalClass entPhysicalContainedIn entPhysicalIndex entPhysicalParentRelPos |
| HOST-RESOURCES-MIB | hrSWInstalledIndex hrSWInstalledName |
| IF-MIB | ifIndex ifOperStatus OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | AutonomousType DateAndTime DisplayString RowPointer RowStatus TestAndIncr TEXTUAL-CONVENTION (no object page) TimeInterval TimeStamp TruthValue |
Net-SNMP examples using the broadbandforum MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ATM-FORUM-SNMP-M4-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ATM-FORUM-SNMP-M4-MIB::atmfM4MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM-FORUM-SNMP-M4-MIB' -M '/opt/observium/mibs/broadbandforum:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM-FORUM-SNMP-M4-MIB::atmfM4MIB'
Objects (226)
Showing 226 of 226 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.353 |
||
.1.3.6.1.4.1.353.5 |
||
.1.3.6.1.4.1.353.5.1 |
||
.1.3.6.1.4.1.353.5.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.10 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.10.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.10.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.11 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.11.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.11.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.12 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.12.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.12.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.13 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.13.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.13.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.14 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.14.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.14.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.15 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.15.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.15.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.15.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.15.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.15.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.15.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.16 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.16.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.16.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.16.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.16.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.16.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.16.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.16.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.17 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.17.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.17.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.17.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.17.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.17.1.4 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.17.1.5 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.18 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.18.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.18.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.18.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.18.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.18.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.19 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.19.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.19.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.19.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.19.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.19.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.19.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.20.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.21.1.8 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.22.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.23.1.8 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.24 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.24.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.24.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.25 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.25.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.25.1.1 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.25.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.25.1.3 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.25.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.25.1.5 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.353.5.1.3.1.1.25.1.6 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.25.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.26 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.26.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.26.1.1 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.26.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.26.1.3 |
|
|
|
.1.3.6.1.4.1.353.5.1.3.1.1.26.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.26.1.5 |
|
|
ObjectIdentifier
|
.1.3.6.1.4.1.353.5.1.3.1.1.26.1.6 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.26.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.28 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.28.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.28.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.28.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.28.1.3 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.28.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.28.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.28.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.28.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.29 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.29.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.29.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.29.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.29.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.29.1.4 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.30 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.30.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.30.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.30.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.30.1.3 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.30.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.30.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.30.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.32 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.32.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.32.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.32.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.32.1.3 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.33 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.33.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.33.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.33.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.33.1.3 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.33.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.34 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.35 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.36 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.36.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.36.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.36.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.37 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.37.1 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.353.5.1.3.1.1.37.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.37.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.38 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.39 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.39.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.1 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.2 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.3 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.39.1.8 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.40 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.40.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.40.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.40.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.40.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.40.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.40.1.5 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.40.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.41 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.41.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.41.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.41.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.41.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.41.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.41.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.42 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.42.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.42.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.42.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.42.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.42.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.42.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.43 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.44 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.45 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.46 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.47 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.6 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.6.1 |
||
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.6.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.353.5.1.3.1.1.6.1.2 |
|
.1.3.6.1.4.1.353.5.1.3.1.1.6.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.7 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.7.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.7.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.7.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.8 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.8.1 |
||
|
|
Enumeration
|
.1.3.6.1.4.1.353.5.1.3.1.1.8.1.1 |
.1.3.6.1.4.1.353.5.1.3.1.1.8.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.8.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.8.1.4 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.8.1.5 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.9 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.9.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.1.9.1.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.2 |
||
.1.3.6.1.4.1.353.5.1.3.1.2.0 |
||
.1.3.6.1.4.1.353.5.1.3.1.3 |
||
.1.3.6.1.4.1.353.5.1.3.1.3.1 |
||
.1.3.6.1.4.1.353.5.1.3.1.3.2 |
Dependencies (13) 7 direct · 6 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- ATM-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- ATM-MIBrfc
- IANA-ENTITY-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- UUID-TC-MIBrfc
- ENTITY-MIBrfc
- HOST-RESOURCES-MIBrfc
- ATM-FORUM-SNMP-M4-MIBbroadbandforumselected
Type Definitions (2)
| Enumeration |
cleared(-1)indeterminate(0)critical(1)major(2)minor(3)warning(4) |
|
| Enumeration |
indeterminate(0)critical(1)major(2)minor(3)warning(4) |
Conformance Groups (32)
Compliance Statements (1)
OID
.1.3.6.1.4.1.353.5.1.3.1.3.2.1The compliance statements are listed as a set up conformance
units that correspond to each table. Support for all tables
is mandatory.
units that correspond to each table. Support for all tables
is mandatory.
Required groups
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| atmfM4TcACellScrambling | noaccess | Support for this object is required only for a TC Adapter which allows deactivation of cell scrambling. |
|
| atmfM4IfLoopbackLocationCode | noaccess | Support for this object is only required for an ATM cell layer interface whose atmfM4IfType is not none(0). |
|
| atmfM4IfSubscriberAddress | noaccess | Support for this object is required only for an ATM cell layer interface whose atmfM4IfType is uni(1). |
|
| atmfM4IfPreferredCarrier | noaccess | Support for this object is only required for an ATM cell layer interface whose atmfM4IfType is uni(1) and which supports SVC services. |
|
| atmfM4IfFarEndCarrierNetwork | noaccess | Support for this object is only required for an ATM cell layer interface whose atmfM4IfType is bici(2) and which supports SVC services. |
|
| atmfM4VpNextVpiValue | noaccess | Support for this object to supply unused VPI values for use in creating entries in the atmVplTable is optional. |
|
| atmfM4VcNextVciValue | noaccess | Support for this object to supply unused VCI values for use in creating entries in the atmVclTable is optional. |
|
| atmfM4VpUpcNpcCurrDiscardedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4VpUpcNpcCurrPassedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4VpUpcNpcHistDiscardedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4VpUpcNpcHistPassedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4VcUpcNpcCurrDiscardedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4VcUpcNpcCurrPassedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4VcUpcNpcHistDiscardedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4VcUpcNpcHistPassedClp0 | noaccess | Support for this object is required only if CLP=0 traffic is separately policed. |
|
| atmfM4EquipHolderAcceptableTypes | noaccess | Support for this object is required only for an Equipment Holder that represents a slot. |
|
| atmfM4EquipHolderSlotStatus | noaccess | Support for this object is required only for an Equipment Holder that represents a slot. |
|
| atmfM4EquipHolderSwLoad | noaccess | Support for this object is required only for an Equipment Holder that represents a slot. |
|
| atmfM4LoggedAlarmBackedUp | noaccess | Support for this object is required only for a logged alarm trap table entry whose corresponding alarm trap included the atmfM4TrapAlarmBackup object. |
|
| atmfM4LoggedAlarmBUObject | noaccess | Support for this object is required only for a logged alarm trap table entry whose corresponding alarm trap included the atmfM4TrapAlarmBUObject object. |
|
| atmfM4LoggedAlarmSpecificProb | noaccess | Support for this object is required only for a logged alarm trap table entry whose corresponding alarm trap included the atmfM4TrapAlarmSpecificProb object. |
|
| atmfM4LoggedAlarmRepairAct | noaccess | Support for this object is required only for a logged alarm trap table entry whose corresponding alarm trap included the atmfM4TrapAlarmRepairAct object. |
Notifications / Traps (76)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.353.5.1.3.1.2.0.1 |
Indicates that an AIS alarm condition has occurred
on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.10 |
Indicates that a signal label mismatch has occurred
on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.11 |
Indicates that an AIS alarm condition has occurred
on the VPL TP associated with the specified interface and VPI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.12 |
Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VPL TP associated with the specified interface and VPI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.13 |
Indicates that an AIS alarm condition has occurred
on the VPC TP associated with the specified interface and VPI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.14 |
Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VPC TP associated with the specified interface and VPI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.15 |
Indicates that an AIS alarm condition has occurred
on the VCL TP associated with the specified interface, VPI, and VCI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.16 |
Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VCL TP associated with the specified interface, VPI, and VCI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.17 |
Indicates that an AIS alarm condition has occurred
on the VCC TP associated with the specified interface, VPI, and VCI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.18 |
Indicates that an RDI (Remote Defect Indication)
condition has occurred on the VCC TP associated with the specified interface, VPI, and VCI. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.19 |
Indicates that a back-plane failure condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.2 |
Indicates that an LCD (Loss of Cell Delineation)
condition has occurred on the TC Adapter associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.20 |
Indicates that a call establishment error condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.21 |
Indicates that a congestion condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.22 |
Indicates that an external interface device problem
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.23 |
Indicates that a line-card problem condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.24 |
Indicates that a multiplexer problem condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.25 |
Indicates that a power problem alarm condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.26 |
Indicates that a processor problem alarm condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.27 |
Indicates that a protection path problem condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.28 |
Indicates that a receiver failure condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.29 |
Indicates that a plug-in unit missing condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.3 |
Indicates that an LOF (Loss of Frame)
condition has occurred on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.30 |
Indicates that a plug-in unit problem condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.31 |
Indicates that a plug-in unit type mismatch condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.32 |
Indicates that a timing problem alarm condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.33 |
Indicates that a transmitter failure condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.34 |
Indicates that a trunk-card problem condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.35 |
Indicates that a storage capacity problem condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.36 |
Indicates that a memory mismatch alarm condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.37 |
Indicates that a corrupt data alarm condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.38 |
Indicates that a software environment problem
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.39 |
Indicates that a software download failure
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.4 |
Indicates that an LOP (Loss of Pointer)
condition has occurred on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.40 |
Indicates that a version mismatch condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.41 |
Indicates that a cooling fan failure condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.42 |
Indicates that an enclosure door open condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.43 |
Indicates that a fuse failure alarm condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.44 |
Indicates that a high temperature condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.45 |
Indicates that a version mismatch condition
has occurred on the hardware unit associated with the specified index. An entPhysicalClass of unknown(2) along with both an entPhysicalContainedIn of 0 and an entPhysicalParentRelPos of -1 indicates that the error occurred in the ATM NE but not in any one hardware unit maintained in the MIB table. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.46 |
Indicates that the operational state of the specified
VPL termination point has transitioned to 'up'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.47 |
Indicates that the operational state of the specified
VPL termination point has transitioned to 'down'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.48 |
Indicates that the operational state of the specified
VCL termination point has transitioned to 'up'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.49 |
Indicates that the operational state of the specified
VCL termination point has transitioned to 'down'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.5 |
Indicates that an LOS (Loss of Signal)
condition has occurred on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.50 |
Indicates that the operational state of the specified
VPL cross-connection has transitioned to 'up'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.51 |
Indicates that the operational state of the specified
VPL cross-connection has transitioned to 'down'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.52 |
Indicates that the operational state of the specified
VCL cross-connection has transitioned to 'up'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.53 |
Indicates that the operational state of the specified
VCL cross-connection has transitioned to 'down'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.54 |
Indicates that the operational state of the specified
hardware unit has transitioned to 'up'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.55 |
Indicates that the operational state of the specified
hardware unit has transitioned to 'down'. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.56 |
Indicates that an ATM cell layer interface has just
been created on the interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.57 |
Indicates that the ATM cell layer interface has just
been deleted. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.58 |
Indicates that the VPC termination point has just
been created. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.59 |
Indicates that the VPC termination point has just
been deleted. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.6 |
Indicates that a payload type mismatch condition has
occurred on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.60 |
Indicates that the VCC termination point has just
been created. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.61 |
Indicates that the VCC termination point has just
been deleted. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.62 |
Indicates that the VPL cross-connection has just
been created. When a cross-connection is created along with its VPL endpoints, this trap should be emitted to indicate the creation of the entire group of objects. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.63 |
Indicates that the VPL cross-connection has just
been deleted. When a cross-connection is deleted along with its VPL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.64 |
Indicates that the VCL cross-connection has just
been created. When a cross-connection is created along with its VCL endpoints, this trap should be emitted to indicate the creation of the entire group of objects. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.65 |
Indicates that the VCL cross-connection has just
been deleted. When a cross-connection is deleted along with its VCL endpoints, this trap should be emitted to indicate the deletion of the entire group of objects. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.66 |
Indicates that the specified hardware unit has been
installed at the specified location. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.67 |
Indicates that the specified hardware unit has been
removed or de-installed from the specified location. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.68 |
Indicates that the specified software package has been
installed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.69 |
Indicates that the specified software package has been
removed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.7 |
Indicates that an transmission error condition has occurred
on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.70 |
Indicates that the configuration of the interface has
been changed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.71 |
Indicates that the VPL termination point configuration
has been changed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.72 |
Indicates that the VCL termination point configuration
has been changed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.73 |
Indicates that the VPL cross-connection configuration
has been changed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.74 |
Indicates that the VCL cross-connection configuration
has been changed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.75 |
Indicates that the specified hardware unit configuration
has changed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.76 |
Indicates that the specified software package configuration
has changed. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.8 |
Indicates that path trace mismatch condition has occurred
on the physical path TP associated with the specified interface. |
|
.1.3.6.1.4.1.353.5.1.3.1.2.0.9 |
Indicates that an RDI (Remote Defect Indication)
condition has occurred on the physical path TP associated with the specified interface. |