ATM-FORUM-SNMP-M4-MIB Table View

The ATM Forum M4 interface Configuration table extensions
for the physical path termination point.

atmfM4PhysPathTpEntry row .1.3.6.1.4.1.353.5.1.3.1.1.6.1

Columns conceptually added to the interface table
entry for an ATM interface to model the physical path
termination point.

The row of the interface table modeling this object should
also include columns for…

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmfM4PhysPathTpHwUnitIndex Specifies the index of the entry in the entPhysicalTable that represents the device (i.e., card) on which the physical path terminates.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.6.1.1
atmfM4PhysPathTpPortID Identifies the port (within the card identified by the hardware unit index) on which the physical path terminates.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.6.1.2
atmfM4PhysPathTpAlarmSeverityIndex Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.6.1.3

The ATM Forum M4 interface Configuration table extensions
for the TC Adapter.

atmfM4TcAdapterEntry row .1.3.6.1.4.1.353.5.1.3.1.1.7.1

Columns conceptually added to the interface table
entry for an ATM interface to model the TC Adapter.

The row of the interface table modeling this object should
also include columns for the physical path TP…

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmfM4TcACellScrambling This attribute is used by the management system to activate and deactivate the ATM cell scrambling function. When the value of this attribute is TRUE, cell scrambling on the interface is activated. This a…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.7.1.1
atmfM4TcAlarmSeverityIndex Specifies the index of the entry in the communications alarm severity profile table that should be used. The default value of this object is zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.7.1.2

The ATM Forum M4 interface Configuration table extensions
for the ATM cell layer.

atmfM4AtmLayerEntry row .1.3.6.1.4.1.353.5.1.3.1.1.8.1

Columns conceptually added to the interface table
entry for an ATM interface to model the ATM cell layer.
The row of the interface table modeling this object should
also include columns for the physical path TP and TC A…

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmfM4IfType Specifies the type of ATM cell layer interface defined on the physical path termination point modeled by this entry in the interface table. The default value of this object is none(0).	Enumerationr/w Enumerated Values: 0 none 1 uni 2 bici 3 bissi	.1.3.6.1.4.1.353.5.1.3.1.1.8.1.1
atmfM4IfLoopbackLocationCode Specifies the code that shall exist in incoming OAM Loopback cells that are to be looped back at this interface. A value of zero shall indicate that the management system has not set any loopback location…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.8.1.2
atmfM4IfSubscriberAddress Specifies the address or newline-delimited list of addresses assigned to the UNI. This object shall be present only for table entries that represent a UNI interface. The default value of th…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.8.1.3
atmfM4IfPreferredCarrier Specifies the name of the default carrier to use when one is not explicitly identified in the call set-up message. This object shall be present only for table entries that represent a UNI interface and on…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.8.1.4
atmfM4IfFarEndCarrierNetwork Specifies the adjacent carrier to which the B-ICI transmission path is connected. This object shall be present only for table entries that represent a B-ICI interface and only when SVC services are suppor…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.8.1.5

The ATM Forum M4 VPL Termination Point Configuration
table extensions.  This table augments the VPL
configuration table in RFC 1695.

atmfM4VplEntry row .1.3.6.1.4.1.353.5.1.3.1.1.9.1

Additional columns for the VPL configuration table entry.

Indexes

No indexes recorded

Column	Syntax	OID
atmfM4VplSegEndPt Specifies whether the VPL termination point is a segment end-point.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.9.1.1

The ATM Forum M4 VCL Termination Point Configuration
table extensions.  This table augments the VCL
configuration table in RFC 1695.

atmfM4VclEntry row .1.3.6.1.4.1.353.5.1.3.1.1.10.1

Additional columns for the VCL configuration table entry.

Indexes

No indexes recorded

Column	Syntax	OID
atmfM4VclSegEndPt Specifies whether the VCL termination point is a segment end-point.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.10.1.1

The ATM Forum M4 VP Cross-Connect Configuration
table extensions.  This table augments the VP Cross-Connect
configuration table in RFC 1695.

atmfM4VpXConnEntry row .1.3.6.1.4.1.353.5.1.3.1.1.11.1

Additional columns for the VP Cross-Connect table entry.

Indexes

No indexes recorded

Column	Syntax	OID
atmfM4VpXConnRecover If FALSE, this cross-connection will be removed on failure.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.11.1.1

The ATM Forum M4 VC Cross-Connect Configuration
table extensions.  This table augments the VC Cross-Connect
configuration table in RFC 1695.

atmfM4VcXConnEntry row .1.3.6.1.4.1.353.5.1.3.1.1.12.1

Additional columns for the VC Cross-Connect table entry.

Indexes

No indexes recorded

Column	Syntax	OID
atmfM4VcXConnRecover If FALSE, this cross-connection will be removed on failure.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.12.1.1

The ATM Forum M4 VP Next VPI value table.  This optional
table supplies unused VPI values for use in creating
entries in the atmVplTable.

atmfM4VpNextVpiEntry row .1.3.6.1.4.1.353.5.1.3.1.1.13.1

Each entry in this table represents the 'next' VPI
value available for a given ATM interface.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmfM4VpNextVpiValue This object contains an appropriate value to be used for atmVplVpi when creating entries in the atmVplTable. The value -1 indicates that no unassigned entries are available. To obtain the atmVplVpi value for a new entr…	Integer32 Constraints: range: -1-4095	.1.3.6.1.4.1.353.5.1.3.1.1.13.1.1

The ATM Forum M4 VC Next VCI value table.  This optional
table supplies unused VCI values for use in creating
entries in the atmVclTable.

atmfM4VcNextVciEntry row .1.3.6.1.4.1.353.5.1.3.1.1.14.1

Each entry in this table represents the 'next' VCI
value available for a given ATM interface.

Each VPL Termination Point automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi

Column	Syntax	OID
atmfM4VcNextVciValue This object contains an appropriate value to be used for atmVclVci when creating entries in the atmVclTable. The value -1 indicates that no unassigned entries are available. To obtain the atmVclVci value for a new entr…	Integer32 Constraints: range: -1-65535	.1.3.6.1.4.1.353.5.1.3.1.1.14.1.1

The ATM Forum M4 Cell Protocol Monitoring Current Data
table.
          
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected.

atmfM4CellProtoCurrEntry row .1.3.6.1.4.1.353.5.1.3.1.1.15.1

An entry in the ATM Forum M4 Cell Protocol Monitoring
Current Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmfM4CellProtoCurrSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.15.1.1
atmfM4CellProtoCurrElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.15.1.2
atmfM4CellProtoCurrSupprIntvls This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.15.1.3
atmfM4CellProtoCurrProtoErrors The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, since the start of this interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.15.1.4
atmfM4CellProtoCurrInOAMCells The number of OAM cells received at this interface since the start of this interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.15.1.5

The ATM Forum M4 Cell Protocol Monitoring History Data
table.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.

atmfM4CellProtoHistEntry row .1.3.6.1.4.1.353.5.1.3.1.1.16.1

An entry in the ATM Forum M4 Cell Protocol Monitoring
History Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute interval …

Indexes

IF-MIBifIndex atmfM4CellProtoHistIndex

Column	Syntax	OID
atmfM4CellProtoHistIndex A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and th…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.353.5.1.3.1.1.16.1.1
atmfM4CellProtoHistSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.16.1.2
atmfM4CellProtoHistElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.16.1.3
atmfM4CellProtoHistSupprIntvls This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.16.1.4
atmfM4CellProtoHistProtoErrors The number of ATM cells dropped on this interface, due to an unrecognized field or set of fields in the ATM cell header, during this interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.16.1.5
atmfM4CellProtoHistInOAMCells The number of OAM cells received at this interface during this interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.16.1.6

The ATM Forum M4 Cell Protocol Monitoring Error Log
table.
          
This table maintains a record of the last error of each
type encountered on each interface, as a result of ATM
Cell Protocol Monitoring.

atmfM4CellProtoErrorEntry row .1.3.6.1.4.1.353.5.1.3.1.1.17.1

An entry in the ATM Forum M4 Cell Protocol Monitoring
Error Log table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each error
that has occurred sinc…

Indexes

IF-MIBifIndex atmfM4CellProtoErrorCode

Column	Syntax	OID
atmfM4CellProtoErrorCode Indicates the type of error for which this entry contains information. The range and interpretation of this error code value is left up to the individual agent implementor.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.17.1.1
atmfM4CellProtoErrorTime Value of sysUpTime when the error occurred.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.353.5.1.3.1.1.17.1.2
atmfM4CellProtoErrorReason The cell header abnormality type: the reason for discarding the ATM cell (i.e., unassigned VPI/VCI value or VPI/VCI value out of range).	Enumeration Enumerated Values: 1 unassignedVpiVciValue 2 outOfRangeVpiVciValue	.1.3.6.1.4.1.353.5.1.3.1.1.17.1.3
atmfM4CellProtoErrorVpi The VPI value of the discarded cell.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.353.5.1.3.1.1.17.1.4
atmfM4CellProtoErrorVci The VCI value of the discarded cell.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.1.3.1.1.17.1.5

The ATM Forum M4 TC Adapter Protocol Monitoring Current
Data table.
          
This table maintains per-interface statistics for the
fifteen-minute interval currently being collected.

atmfM4TcProtoCurrEntry row .1.3.6.1.4.1.353.5.1.3.1.1.18.1

An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
Current Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmfM4TcProtoCurrSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.18.1.1
atmfM4TcProtoCurrElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.18.1.2
atmfM4TcProtoCurrSupprIntvls This attribute is non-zero only if the ATM NE is suppressing ATM TC Adapter Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.18.1.3
atmfM4TcProtoCurrDiscardHECViol The number of ATM cells discarded on this interface, due to a HEC violation, since the start of this interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.18.1.4

The ATM Forum M4 TC Adapter Protocol Monitoring History
Data table.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.

atmfM4TcProtoHistEntry row .1.3.6.1.4.1.353.5.1.3.1.1.19.1

An entry in the ATM Forum M4 TC Adapter Protocol Monitoring
History Data table.

Each ATM interface (UNI, BICI, BISSI) automatically has
an entry in this table associated with it for each fifteen-
minute int…

Indexes

IF-MIBifIndex atmfM4TcProtoHistIndex

Column	Syntax	OID
atmfM4TcProtoHistIndex A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and th…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.353.5.1.3.1.1.19.1.1
atmfM4TcProtoHistSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.19.1.2
atmfM4TcProtoHistElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.19.1.3
atmfM4TcProtoHistSupprIntvls This attribute is non-zero only if the ATM NE is suppressing ATM Cell Protocol Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. When …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.19.1.4
atmfM4TcProtoHistDiscardHECViol The number of ATM cells discarded on this interface, due to a HEC violation, during this interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.19.1.5

The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VPL termination points.
          
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected.

atmfM4VpUpcNpcCurrEntry row .1.3.6.1.4.1.353.5.1.3.1.1.20.1

An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VPL termination points.

Each VPL Termination Point automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi

Column	Syntax	OID
atmfM4VpUpcNpcCurrSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.20.1.1
atmfM4VpUpcNpcCurrElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.20.1.2
atmfM4VpUpcNpcCurrSupprIntvls This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. Wh…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.20.1.3
atmfM4VpUpcNpcCurrDiscardedCells The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.20.1.4
atmfM4VpUpcNpcCurrDiscardedClp0 The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.20.1.5
atmfM4VpUpcNpcCurrPassedCells The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.20.1.6
atmfM4VpUpcNpcCurrPassedClp0 The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.20.1.7

The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VPL termination points.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.

atmfM4VpUpcNpcHistEntry row .1.3.6.1.4.1.353.5.1.3.1.1.21.1

An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VPL termination points.

Each VPL Termination Point automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi atmfM4VpUpcNpcHistIndex

Column	Syntax	OID
atmfM4VpUpcNpcHistIndex A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and th…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.1
atmfM4VpUpcNpcHistSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.2
atmfM4VpUpcNpcHistElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.3
atmfM4VpUpcNpcHistSupprIntvls This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. Wh…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.4
atmfM4VpUpcNpcHistDiscardedCells The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.5
atmfM4VpUpcNpcHistDiscardedClp0 The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.6
atmfM4VpUpcNpcHistPassedCells The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.7
atmfM4VpUpcNpcHistPassedClp0 The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.21.1.8

The ATM Forum M4 UPC/NPC Disagreement Monitoring Current
Data table for VCL termination points.
          
This table maintains per-TP statistics for the
fifteen-minute interval currently being collected.

atmfM4VcUpcNpcCurrEntry row .1.3.6.1.4.1.353.5.1.3.1.1.22.1

An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring Current Data table for VCL termination points.

Each VCL Termination Point automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column	Syntax	OID
atmfM4VcUpcNpcCurrSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.22.1.1
atmfM4VcUpcNpcCurrElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.22.1.2
atmfM4VcUpcNpcCurrSupprIntvls This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. Wh…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.22.1.3
atmfM4VcUpcNpcCurrDiscardedCells The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.22.1.4
atmfM4VcUpcNpcCurrDiscardedClp0 The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.22.1.5
atmfM4VcUpcNpcCurrPassedCells The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.22.1.6
atmfM4VcUpcNpcCurrPassedClp0 The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.22.1.7

The ATM Forum M4 UPC/NPC Disagreement Monitoring History
Data table for VCL termination points.
          
This table maintains per-interface statistics for previous
fifteen-minute intervals.

atmfM4VcUpcNpcHistEntry row .1.3.6.1.4.1.353.5.1.3.1.1.23.1

An entry in the ATM Forum M4 UPC/NPC Disagreement
Monitoring History Data table for VCL termination points.

Each VCL Termination Point automatically has
an entry in this table associated with it.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmfM4VcUpcNpcHistIndex

Column	Syntax	OID
atmfM4VcUpcNpcHistIndex A number between 1 and 96, which identifies the interval for which the set of statistics in this entry was collected. The interval identified by 1 is the most recently completed 15 minute interval, and th…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.1
atmfM4VcUpcNpcHistSuspect If true, the statistics in this entry may be unreliable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.2
atmfM4VcUpcNpcHistElapsedTime Amount of time, measured in units of 0.01 second, that statistics for this entry (the current interval) have been counted.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.3
atmfM4VcUpcNpcHistSupprIntvls This attribute is non-zero only if the ATM NE is suppressing UPC/NPC Disagreement Monitoring History Data entry creation when the current interval terminates with 'all-zeroes' performance measurements. Wh…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.4
atmfM4VcUpcNpcHistDiscardedCells The number of discarded cells due to combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.5
atmfM4VcUpcNpcHistDiscardedClp0 The number of discarded CLP=0 cells due to CLP=0 only UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.6
atmfM4VcUpcNpcHistPassedCells The number of cells that have been successfully passed by the combined CLP=0 and CLP=1 UPC/NPC policing.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.7
atmfM4VcUpcNpcHistPassedClp0 The number of CLP=0 cells that have been successfully passed by the CLP=0 UPC/NPC policing. This object shall be present only if CLP=0 traffic is separately policed.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.23.1.8

The ATM Forum M4 VP Termination Point Test table.
This table allows tests to be run on VPL and VPC
termination points.
          
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different.

atmfM4VpTestEntry row .1.3.6.1.4.1.353.5.1.3.1.1.25.1

An entry containing objects for invoking tests on a
VPL or VPC termination point.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi atmfM4VpTestObject

Column	Syntax	OID
atmfM4VpTestObject Specifies whether the test applies to the VPL termination point with the specified VPI, or the VPC termination point.	Enumeration Enumerated Values: 1 vplTp 2 vpcTp	.1.3.6.1.4.1.353.5.1.3.1.1.25.1.1
atmfM4VpTestId This object identifies the current invocation of the interface's test.	SNMPv2-TCTestAndIncrr/w Type Constraints: range: 0..2147483647 Description: Represents integer-valued information used for atomic operations. When the management protocol is used to specify that an object instance having this syntax is to be modified, the new value supplied via the management …	.1.3.6.1.4.1.353.5.1.3.1.1.25.1.2
atmfM4VpTestStatus This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(…	Enumerationr/w Enumerated Values: 1 notInUse 2 inUse	.1.3.6.1.4.1.353.5.1.3.1.1.25.1.3
atmfM4VpTestType A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this docum…	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.353.5.1.3.1.1.25.1.4
atmfM4VpTestResult This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of on…	Enumeration Enumerated Values: 1 none 2 success 3 inProgress 4 notSupported 5 unAbleToRun 6 aborted 7 failed	.1.3.6.1.4.1.353.5.1.3.1.1.25.1.5
atmfM4VpTestCode This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of inte…	ObjectIdentifier	.1.3.6.1.4.1.353.5.1.3.1.1.25.1.6
atmfM4VpTestOwner The entity which currently has the 'ownership' required to invoke a test on this interface.	IF-MIBOwnerStringr/w Type Constraints: range: 0..255 Description: This data type is used to model an administratively assigned name of the owner of a resource. This information is taken from the NVT ASCII character set. It is suggested that this name contain one or more of the follo…	.1.3.6.1.4.1.353.5.1.3.1.1.25.1.7

The ATM Forum M4 VC Termination Point Test table.
This table allows tests to be run on VCL and VCC
termination points.
          
The operation of this table is entirely analogous to
that of the ifTestTable in RFC 1573 (which was later
deprecated in RFC 2233), except that the indexes into
this table are different.

atmfM4VcTestEntry row .1.3.6.1.4.1.353.5.1.3.1.1.26.1

An entry containing objects for invoking tests on a
VCL or VCC termination point.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmfM4VcTestObject

Column	Syntax	OID
atmfM4VcTestObject Specifies whether the test applies to the VCL termination point with the specified VPI and VCI values, or to the VCC termination point.	Enumeration Enumerated Values: 1 vclTp 2 vccTp	.1.3.6.1.4.1.353.5.1.3.1.1.26.1.1
atmfM4VcTestId This object identifies the current invocation of the interface's test.	SNMPv2-TCTestAndIncrr/w Type Constraints: range: 0..2147483647 Description: Represents integer-valued information used for atomic operations. When the management protocol is used to specify that an object instance having this syntax is to be modified, the new value supplied via the management …	.1.3.6.1.4.1.353.5.1.3.1.1.26.1.2
atmfM4VcTestStatus This object indicates whether or not some manager currently has the necessary 'ownership' required to invoke a test on this interface. A write to this object is only successful when it changes its value from 'notInUse(…	Enumerationr/w Enumerated Values: 1 notInUse 2 inUse	.1.3.6.1.4.1.353.5.1.3.1.1.26.1.3
atmfM4VcTestType A control variable used to start and stop operator- initiated interface tests. Most OBJECT IDENTIFIER values assigned to tests are defined elsewhere, in association with specific types of interface. However, this docum…	SNMPv2-TCAutonomousTyper/w Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.353.5.1.3.1.1.26.1.4
atmfM4VcTestResult This object contains the result of the most recently requested test, or the value none(1) if no tests have been requested since the last reset. Note that this facility provides no provision for saving the results of on…	Enumeration Enumerated Values: 1 none 2 success 3 inProgress 4 notSupported 5 unAbleToRun 6 aborted 7 failed	.1.3.6.1.4.1.353.5.1.3.1.1.26.1.5
atmfM4VcTestCode This object contains a code which contains more specific information on the test result, for example an error-code after a failed test. Error codes and other values this object may take are specific to the type of inte…	ObjectIdentifier	.1.3.6.1.4.1.353.5.1.3.1.1.26.1.6
atmfM4VcTestOwner The entity which currently has the 'ownership' required to invoke a test on this termination point.	IF-MIBOwnerStringr/w Type Constraints: range: 0..255 Description: This data type is used to model an administratively assigned name of the owner of a resource. This information is taken from the NVT ASCII character set. It is suggested that this name contain one or more of the follo…	.1.3.6.1.4.1.353.5.1.3.1.1.26.1.7

The ATM Forum M4 Equipment table.  This table augments the
entPhysicalTable.

atmfM4EquipEntry row .1.3.6.1.4.1.353.5.1.3.1.1.28.1

An entry in the ATM Forum M4 Equipment table. Each entry
of this table represents a piece of equipment within the ATM
NE that neither is nor accepts a replaceable plug-in unit.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
atmfM4EquipAdminStatus Used by the administrator to lock and unlock the object.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.353.5.1.3.1.1.28.1.1
atmfM4EquipLocation The specific or general location of the component.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.28.1.2
atmfM4EquipOperStatus This attributes identifies whether or not the component is capable of performing its normal functions.	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.353.5.1.3.1.1.28.1.3
atmfM4EquipVendor The vendor of the component.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.28.1.4
atmfM4EquipVersion The version of the component.	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.353.5.1.3.1.1.28.1.5
atmfM4EquipUserLabel A user-friendly name for the piece of equipment. The default value of this object is the null string.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.28.1.6
atmfM4EquipAlarmSeverityIndex An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object is zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.28.1.7

The ATM Forum M4 Equipment Holder table.  This table
augments the entPhysicalTable.

atmfM4EquipHolderEntry row .1.3.6.1.4.1.353.5.1.3.1.1.29.1

An entry in the ATM Forum M4 Equipment Holder table. Each
entry of this table represents a component within the ATM NE
that accepts a replaceable plug-in unit.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
atmfM4EquipHolderType The type of the component.	Enumeration Enumerated Values: 1 rack 2 shelf 3 drawer 4 slot	.1.3.6.1.4.1.353.5.1.3.1.1.29.1.1
atmfM4EquipHolderAcceptableTypes The types of plug-in units that can be supported by the slot, separated by newline characters. This attribute shall be present only when the Equipment Holder represents a slot.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.29.1.2
atmfM4EquipHolderSlotStatus This attributes identifies whether or not a plug-in unit is present in the slot. This attribute shall be present only when the Equipment Holder represents a slot.	Enumeration Enumerated Values: 1 empty 2 full	.1.3.6.1.4.1.353.5.1.3.1.1.29.1.3
atmfM4EquipHolderSwLoad An index into the installed software table, specifying the software that is to be loaded into the plug-in unit whenever an automatic reload of software is needed. This attribute shall be present only when…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.29.1.4

The ATM Forum M4 Plug-In Unit table.  This table augments
the entPhysicalTable.

atmfM4PlugInUnitEntry row .1.3.6.1.4.1.353.5.1.3.1.1.30.1

An entry in the ATM Forum M4 Plug-In Unit table. Each
entry of this table represents a piece of equipment within
the ATM NE that is inserted into and removed from an
Equipment Holder.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
atmfM4PlugInUnitAdminStatus Used by the administrator to lock and unlock the object.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.353.5.1.3.1.1.30.1.1
atmfM4PlugInUnitAvailStatus Provides further information regarding the state of the component.	Enumeration Enumerated Values: 1 available 2 inTest 3 failed 4 powerOff 5 notInstalled 6 offLine 7 dependency	.1.3.6.1.4.1.353.5.1.3.1.1.30.1.2
atmfM4PlugInUnitOperStatus This attributes identifies whether or not the component is capable of performing its normal functions.	Enumeration Enumerated Values: 1 up 2 down 3 unknown	.1.3.6.1.4.1.353.5.1.3.1.1.30.1.3
atmfM4PlugInUnitVendor The vendor of the component.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.30.1.4
atmfM4PlugInUnitVersion The version of the component.	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.353.5.1.3.1.1.30.1.5
atmfM4PlugInUnitAlarmSeverityIndex An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this component. The default value of this object is zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.30.1.6

The ATM Forum M4 Hardware Unit/Running Software
relationship table.  This table describes the software that
is running on each hardware unit in the ATM NE.

atmfM4HwRunningSwEntry row .1.3.6.1.4.1.353.5.1.3.1.1.32.1

An entry in the ATM Forum M4 Hardware Unit/Running Software
relationship table. Each entry of this table identifies an
entry in the entPhysicalTable and one in the hrSWRunTable.

Indexes

atmfM4HwRunningSwHwIndex atmfM4HwRunningSwIndex

Column	Syntax	OID
atmfM4HwRunningSwHwIndex The index, in the entPhysicalTable, of the containing hardware unit in this pair.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.32.1.1
atmfM4HwRunningSwIndex A unique number within the context of the containing hardware unit.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.32.1.2
atmfM4HwRunningSwSwIndex The index, in the hrSWRunTable, of the software product represented by this entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.32.1.3

The ATM Forum M4 Hardware Unit/Installed Software
relationship table.  This table describes the software that
is installed on each hardware unit in the ATM NE.

atmfM4HwInstalledSwEntry row .1.3.6.1.4.1.353.5.1.3.1.1.33.1

An entry in the ATM Forum M4 Hardware Unit/Installed
Software relationship table. Each entry of this table
identifies an entry in the entPhysicalTable and one in
the hrSWInstalledTable.

Indexes

atmfM4HwInstalledSwHwIndex atmfM4HwInstalledSwIndex

Column	Syntax	OID
atmfM4HwInstalledSwHwIndex The index, in the entPhysicalTable, of the containing physical entity in this pair.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.33.1.1
atmfM4HwInstalledSwIndex A unique number within the context of the containing hardware unit.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.33.1.2
atmfM4HwInstalledSwSwIndex The index, in the hrSWInstalledTable, of the software product represented by this entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.33.1.3
atmfM4HwSwAlarmSeverityIndex An index into the alarm severity profile table, specifying the severity assignments for M4 alarms reported for this piece of software installed on the hardware unit. The default value of this object is zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.33.1.4

The ATM Forum M4 alarm severity profile table.
This table specifies which profiles exist. Creating
or deleting an entry in this table automatically
creates or deletes the corresponding entries in the
atmfM4AlarmSeverityTable.

atmfM4AlarmSevProfileEntry row .1.3.6.1.4.1.353.5.1.3.1.1.36.1

A group of severities, one for each alarm type in
the communications alarm group.

Indexes

atmfM4AlarmSevProfileIndex

Column	Syntax	OID
atmfM4AlarmSevProfileIndex A number identifying this alarm severity profile.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.36.1.1
atmfM4AlarmSevProfileRowStatus This object is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.1.3.1.1.36.1.2

The ATM Forum M4 alarm severity table.
This table associates profile index and trap
ID pairs with severities to be used for
M4 alarm traps that have occurred.
(Note that this table does not apply to cleared alarms.)

atmfM4AlarmSevEntry row .1.3.6.1.4.1.353.5.1.3.1.1.37.1

An entry in this table associates an alarm severity
profile index/trap ID pair with a severity.
Deleting a particular profile's row in the alarm severity
profile table deletes all rows in this table with the
same profil…

Indexes

atmfM4AlarmSevProfileIndex atmfM4AlarmSevTrapId

Column	Syntax	OID
atmfM4AlarmSevTrapId The ID of the trap type to which this entry applies.	ObjectIdentifier	.1.3.6.1.4.1.353.5.1.3.1.1.37.1.1
atmfM4AlarmSeverity The severity to be used for this trap type when the TrapId is selected. If no value for this object has ever been set since the corresponding profile was created, the agent should return the value of the object atmfM4Al…	AtmfM4AlarmSeverityr/w Type Values: 0 indeterminate 1 critical 2 major 3 minor 4 warning	.1.3.6.1.4.1.353.5.1.3.1.1.37.1.2

The ATM Forum M4 Trap forwarding discriminator
table.
This table specifies which traps will be sent to
which management system.

atmfM4TrapForwardingEntry row .1.3.6.1.4.1.353.5.1.3.1.1.39.1

Information about a group of traps to be sent to
a particular IP address.

A new entry must have values for all attributes that
do not have default values before its RowStatus column
can be set to active(1).

Indexes

atmfM4TrapForwardingIndex

Column	Syntax	OID
atmfM4TrapForwardingIndex A unique number identifying the table entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.1
atmfM4TrapForwardingDest The IP address to which traps identified by this table entry should be sent.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.2
atmfM4ForwardedTrapId The ID of the trap type to which this entry applies.	ObjectIdentifierr/w	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.3
atmfM4ForwardedTrapObject The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. The special value { 0 0 } indicates that traps of this type from all objects…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.4
atmfM4TrapForwardingPort The UDP port on the specified management system to which traps identified by this entry should be sent.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.5
atmfM4LowestForwardedSeverity The lowest severity of traps of this type from the specified object that should be sent to this address. This object has significance only if the trap type specified has a severity associated with it.	AtmfM4AlarmSeverityr/w Type Values: 0 indeterminate 1 critical 2 major 3 minor 4 warning	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.6
atmfM4ForwardedIndeterminate When this object has the value TRUE, traps with indeterminate severity will be forwarded to the specified event. This object has significance only if the trap type specified has a severity associated with it.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.7
atmfM4TrapForwardingRowStatus This object is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.1.3.1.1.39.1.8

The ATM Forum M4 Trap Agent log table.
This table defines the trap logs currently maintained
by the agent.
The management system creates entries in this table to
specify which types of traps, from which ATM network
elements, should be logged.
Deleting an entry in this table deletes all entries in
the corresponding log.

atmfM4TrapLogEntry row .1.3.6.1.4.1.353.5.1.3.1.1.40.1

Information about a single trap log.

Indexes

atmfM4TrapLogSrc atmfM4TrapLogType

Column	Syntax	OID
atmfM4TrapLogSrc The IP address of the SNMP agent whose traps are stored in this log.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.353.5.1.3.1.1.40.1.1
atmfM4TrapLogType The type of traps stored in this log.	Enumeration Enumerated Values: 1 objectCreated 2 objectDeleted 3 configChange 4 stateChange 5 alarm	.1.3.6.1.4.1.353.5.1.3.1.1.40.1.2
atmfM4TrapLogAdminStatus The management system uses this object to stop and start the operations of this object.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.353.5.1.3.1.1.40.1.3
atmfM4TrapLogOperStatus Indicates whether or not the log is capable of performing its normal operations.	Enumeration Enumerated Values: 1 up 2 down 3 logFull	.1.3.6.1.4.1.353.5.1.3.1.1.40.1.4
atmfM4TrapLogFullAction Indicates the action that should be performed when no more log entries can be created due to a log-full condition. If the value of this object is wrap(2), each new log entry will cause the deletion of the oldest entry …	Enumerationr/w Enumerated Values: 1 halt 2 wrap	.1.3.6.1.4.1.353.5.1.3.1.1.40.1.5
atmfM4TrapLogRowStatus This object is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.1.3.1.1.40.1.6

The ATM Forum M4 Trap Agent logged trap table.
This table is used to maintain the traps logged.

atmfM4LoggedTrapEntry row .1.3.6.1.4.1.353.5.1.3.1.1.41.1

Information about a single trap in the log.
Entries in this table are created automatically but
can be deleted by the management system.
Entries that represent 'alarm' log types are augmented
by the atmfM4LoggedAlarmEnt…

Indexes

atmfM4TrapLogSrc atmfM4TrapLogType atmfM4LoggedTrapIndex

Column	Syntax	OID
atmfM4LoggedTrapIndex A unique number identifying this entry in the log. When the maximum value for this object has been reached, it will wrap around to 0.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.1.3.1.1.41.1.1
atmfM4LoggedTrapTime The time at which this trap was logged.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.353.5.1.3.1.1.41.1.2
atmfM4LoggedTrapID The type of trap to which this entry applies. Together with the logged trap ID object, this object specifies the entity to which this logged trap referred.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.1.3.1.1.41.1.3
atmfM4LoggedTrapObject The object to which this entry applies. By convention, this is the name of the first object in the row in the table referenced. Together with the logged trap ID object, this object specifies the entity to which this log…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.353.5.1.3.1.1.41.1.4
atmfM4LoggedTrapRowStatus This object is used to delete an existing row in the table. Note that the only value to which a management system can set this object is destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.1.3.1.1.41.1.5

The ATM Forum M4 Trap Agent logged alarm trap table.
This table is used to maintain extra information for
logged traps that represent alarm types.

atmfM4LoggedAlarmEntry row .1.3.6.1.4.1.353.5.1.3.1.1.42.1

Information about the alarm-specific attributes of
a single trap in the log.

Indexes

atmfM4TrapLogSrc atmfM4TrapLogType atmfM4LoggedTrapIndex

Column	Syntax	OID
atmfM4LoggedAlarmSeverity The perceived severity of the alarm, as specified by the agent that generated it.	AtmfM4AlarmLogSeverity Type Values: -1 cleared 0 indeterminate 1 critical 2 major 3 minor 4 warning	.1.3.6.1.4.1.353.5.1.3.1.1.42.1.1
atmfM4LoggedAlarmBackedUp If the value of this object is true, the agent reported in this trap that the failed object had been backed up. This object is only present if it was included in the alarm trap corresponding to this log e…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.1.3.1.1.42.1.2
atmfM4LoggedAlarmBUObject Indicates the object that provided back-up services to the failed object. This object is only present if it was included in the alarm trap corresponding to this log entry.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.353.5.1.3.1.1.42.1.3
atmfM4LoggedAlarmSpecificProb Indicates further refinements to the problem identified by the alarm type. If more than one specific problem is described in this object, the problem descriptions are separated by newline characters. Thi…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.42.1.4
atmfM4LoggedAlarmRepairAct Indicates proposed repair actions reported by the agent for the problem identified by the alarm. If more than one action is described in this object, the problem descriptions are separated by newline characters. …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.1.3.1.1.42.1.5