zxAnXdsl2LnCmndConfReset

ZTE-AN-XDSL2-MIBII · .1.3.6.1.4.1.3902.1015.1001.1.2.10.1.27
Commands MIB view Table view

Object

column r/w VDSL2-LINE-TC-MIBXdsl2LineReset 
Command: Request a line reset to occur.
If this attribute is set to the value of reset(2), then
force the line to reset ( i.e. the modems will retrain ).
When the line has successfully reset, the SNMP agent will
set the value of this attribute to idle(1).
              
Note that the xdsl2LineCmndConfPmsf attribute will always
take precedence over this attribute.
If the xdsl2LineCmndConfPmsf attribute is set to the value
l0orL2toL3(3), then the line must not return to the
showtime state due to a reset request action performed
using this attribute.

Context

MIB
ZTE-AN-XDSL2-MIBII
OID
.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.27
Type
column
Access
readwrite
Status
current
Parent
zxAnXdsl2LnEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-XDSL2-MIBII' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-XDSL2-MIBII::zxAnXdsl2LnCmndConfReset'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ZTE-AN-XDSL2-MIBII' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-XDSL2-MIBII::zxAnXdsl2LnCmndConfReset.<ifIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZTE-AN-XDSL2-MIBII' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZTE-AN-XDSL2-MIBII::zxAnXdsl2LnCmndConfReset'

Syntax

VDSL2-LINE-TC-MIBXdsl2LineReset
Source
VDSL2-LINE-TC-MIBXdsl2LineReset
Base type
Enumeration

Values & Constraints

Type Values
1idle
2reset