ZTE-AN-XDSL2-MIBII Table View

The table zxAnXdsl2LnTable contains configuration,
command and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.
The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx).
          
Several objects in this table MUST be maintained in a
 persistent manner.

zxAnXdsl2LnEntry row .1.3.6.1.4.1.3902.1015.1001.1.2.10.1

The table zxAnXdsl2LnTable contains configuration,
commands and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.

Indexes

IF-MIBifIndex

Column	Syntax	OID
zxAnXdsl2LnCh1DsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.1
zxAnXdsl2LnCh2DsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.2
zxAnXdsl2LnCh3DsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.3
zxAnXdsl2LnCh4DsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line DsDataRate Profile Table, (zxAnXdsl2DsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.4
zxAnXdsl2LnCh1UsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.5
zxAnXdsl2LnCh2UsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.6
zxAnXdsl2LnCh3UsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.7
zxAnXdsl2LnCh4UsDataRateConfPrf The value of this object identifies the row in the xDSL2 Line UsDataRate Profile Table, (zxAnXdsl2UsDataRateConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.8
zxAnXdsl2LnSpectrumConfPrf The value of this object identifies the row in the xDSL2 Line Spectrum Profile Table, (zxAnXdsl2SpectrumConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.9
zxAnXdsl2LnDpboConfPrf The value of this object identifies the row in the xDSL2 Line Dpbo Profile Table, (zxAnXdsl2DpboConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.10
zxAnXdsl2LnUpboConfPrf The value of this object identifies the row in the xDSL2 Line Upbo Profile Table, (zxAnXdsl2UpboConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.11
zxAnXdsl2LnSnrMarginConfPrf The value of this object identifies the row in the xDSL2 Noise Margin Profile Table, (zxAnXdsl2SnrMarginConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.12
zxAnXdsl2LnCh1DelayInpConfPrf The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.13
zxAnXdsl2LnCh2DelayInpConfPrf The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.14
zxAnXdsl2LnCh3DelayInpConfPrf The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.15
zxAnXdsl2LnCh4DelayInpConfPrf The value of this object identifies the row in the xDSL2 Delay AND INP Profile Table, (zxAnXdsl2DelayInpConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.16
zxAnXdsl2LnRfiConfPrf The value of this object identifies the row in the xDSL2 RFI Profile Table, (zxAnXdsl2RfiConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.17
zxAnXdsl2LnVirtualNoiseConfPrf The value of this object identifies the row in the xDSL2 Virtual Noise Profile Table, (zxAnXdsl2VirtualNoiseConfPrfTable), which applies for this line. This object MUST be maintained in a persistent man…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.18
zxAnXdsl2LnAlmThreshPrfName The value of this object identifies the row in the xDSL2 Line Alarm Configuration Profile Table, (zxAnXdsl2LnAlarmConfPrfTable), which applies to this line. This object MUST be maintained in a persistent …	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.19
zxAnXdsl2LnCmndConfPmsf Command:Power management state forced (PMSF). Defines the line states to be forced by the near-end xTU on this line. The various possible values are: l3toL0 (0), l0toL2 (2), l0orL2toL3 (3). This…	VDSL2-LINE-TC-MIBXdsl2ConfPmsForcer/w Type Values: 0 l3toL0 2 l0toL2 3 l0orL2toL3	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.20
zxAnXdsl2LnCmndConfLdsf Command:Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only be responsive to loop diagnostics initiated by the far-en…	VDSL2-LINE-TC-MIBXdsl2LineLdsfr/w Type Values: 0 inhibit 1 force	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.21
zxAnXdsl2LnCmndConfLdsfFailReason Command:The status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Possible values are: none (1) - The default value in case LDSF was never …	VDSL2-LINE-TC-MIBXdsl2LdsfResult Type Values: 1 none 2 success 3 inProgress 4 unsupported 5 cannotRun 6 aborted 7 failed 8 illegalMode 9 adminUp 10 tableFull 11 noResources	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.22
zxAnXdsl2LnCmndConfBpsc Command:Request a bits per sub-carrier measurement to be made. A request for a bits per sub-carrier measurement is made by setting this attribute to the value of measure(2). Upon completion of the measure…	VDSL2-LINE-TC-MIBXdsl2LineBpscr/w Type Values: 1 idle 2 measure	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.23
zxAnXdsl2LnCmndConfBpscFailReason Command:The status of the most recent bits per sub-carrier measurement request issued for the associated line. Possible values are: none (1) - The default value, in case a measurement …	VDSL2-LINE-TC-MIBXdsl2BpscResult Type Values: 1 none 2 success 3 inProgress 4 unsupported 5 failed 6 noResources	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.24
zxAnXdsl2LnCmndConfBpscReqCount Command:Measurement request counter. This counter is incremented by one every time a request for a measurement is made. A measurement request is made by setting the xdsl2LineCmndConfBpsc attribute to the value measure(2…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.25
zxAnXdsl2LnCmndAutomodeColdStart Command: Automode cold start forced. This parameter is defined in order to improve testing of the performance of xTUs supporting automode when it is enabled in the MIB. Change the value of this parameter to 'true' indi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.26
zxAnXdsl2LnCmndConfReset Command: Request a line reset to occur. If this attribute is set to the value of reset(2), then force the line to reset ( i.e. the modems will retrain ). When the line has successfully reset, the SNMP agent will set the…	VDSL2-LINE-TC-MIBXdsl2LineResetr/w Type Values: 1 idle 2 reset	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.27
zxAnXdsl2LnStatusXtuTransSys The xTU Transmission System (xTS) in use. It is coded in a bit-map representation with one bit set to '1' (the selected coding for the DSL line). This parameter may be derived from the handshaking procedures defined in…	ZTE-AN-XDSL2-MIBZxAnXdsl2TransmissionModeType Type Values: 0 ansit1413 1 etsi 2 g9921PotsNonOverlapped 3 g9921PotsOverlapped 4 g9921IsdnNonOverlapped 5 g9921isdnOverlapped 6 g9921tcmIsdnNonOverlapped 7 g9921tcmIsdnOverlapped 8 g9922potsNonOverlapeed 9 g9922potsOverlapped 10 g9922tcmIsdnNonOverlapped 11 g9922tcmIsdnOverlapped 12 g9921tcmIsdnSymmetric 13 reserved1 14 reserved2 15 reserved3 16 reserved4 17 reserved5 18 g9923PotsNonOverlapped 19 g9923PotsOverlapped 20 g9923IsdnNonOverlapped 21 g9923isdnOverlapped 22 reserved6 23 reserved7 24 g9924potsNonOverlapeed 25 g9924potsOverlapped 26 reserved8 27 reserved9 28 g9923AnnexIAllDigNonOverlapped 29 g9923AnnexIAllDigOverlapped 30 g9923AnnexJAllDigNonOverlapped 31 g9923AnnexJAllDigOverlapped 32 g9924AnnexIAllDigNonOverlapped 33 g9924AnnexIAllDigOverlapped 34 g9923AnnexLMode1NonOverlapped 35 g9923AnnexLMode2NonOverlapped 36 g9923AnnexLMode3Overlapped 37 g9923AnnexLMode4Overlapped 38 g9923AnnexMPotsNonOverlapped 39 g9923AnnexMPotsOverlapped 40 g9925PotsNonOverlapped 41 g9925PotsOverlapped 42 g9925IsdnNonOverlapped 43 g9925isdnOverlapped 44 reserved10 45 reserved11 46 g9925AnnexIAllDigNonOverlapped 47 g9925AnnexIAllDigOverlapped 48 g9925AnnexJAllDigNonOverlapped 49 g9925AnnexJAllDigOverlapped 50 g9925AnnexMPotsNonOverlapped 51 g9925AnnexMPotsOverlapped 52 reserved12 53 g9932AnnexAProtection 54 g9932AnnexBProtection 55 g9932AnnexCProtection 56 g9932AnnexA 57 g9932AnnexB 58 g9932AnnexC 59 reserved16 60 reserved17 61 g9935AnnexA 62 g9935AnnexB 63 g9935AnnexC	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.28
zxAnXdsl2LnStatusPwrMngState The current power management state. One of four possible power management states: L0 - Synchronized and full transmission (i.e., Showtime), L1 - Low Power with reduced net data rate (G.992.2 only), L2 - Low Po…	VDSL2-LINE-TC-MIBXdsl2PowerMngState Type Values: 1 l0 2 l1 3 l2 4 l3	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.29
zxAnXdsl2LnStatusInitResult Indicates the result of the last full initialization performed on the line. It is an enumeration type with the following values: noFail(0), configError(1), configNotFeasible(2), commFail(3), noPeerAtu(4), otherCau…	Enumeration Enumerated Values: 0 noFail 1 configError 2 configNotFeasible 3 commFail 4 noPeerAtu 5 otherCause 254 protocolInitFailure	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.30
zxAnXdsl2LnStatusLastStateDs The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line.	VDSL2-LINE-TC-MIBXdsl2LastTransmittedState Type Values: 0 atucG9941 1 atucQuiet1 2 atucComb1 3 atucQuiet2 4 atucComb2 5 atucIcomb1 6 atucLineprob 7 atucQuiet3 8 atucComb3 9 atucIComb2 10 atucMsgfmt 11 atucMsgpcb 12 atucQuiet4 13 atucReverb1 14 atucTref1 15 atucReverb2 16 atucEct 17 atucReverb3 18 atucTref2 19 atucReverb4 20 atucSegue1 21 atucMsg1 22 atucReverb5 23 atucSegue2 24 atucMedley 25 atucExchmarker 26 atucMsg2 27 atucReverb6 28 atucSegue3 29 atucParams 30 atucReverb7 31 atucSegue4 32 atucShowtime 100 aturG9941 101 aturQuiet1 102 aturComb1 103 aturQuiet2 104 aturComb2 105 aturIcomb1 106 aturLineprob 107 aturQuiet3 108 aturComb3 109 aturIcomb2 110 aturMsgfmt 111 aturMsgpcb 112 aturReverb1 113 aturQuiet4 114 aturReverb2 115 aturQuiet5 116 aturReverb3 117 aturEct 118 aturReverb4 119 aturSegue1 120 aturReverb5 121 aturSegue2 122 aturMsg1 123 aturMedley 124 aturExchmarker 125 aturMsg2 126 aturReverb6 127 aturSegue3 128 aturParams 129 aturReverb7 130 aturSegue4 131 aturShowtime 200 vtucG9941 201 vtucQuiet1 202 vtucChDiscov1 203 vtucSynchro1 204 vtucPilot1 205 vtucQuiet2 206 vtucPeriodic1 207 vtucSynchro2 208 vtucChDiscov2 209 vtucSynchro3 210 vtucTraining1 211 vtucSynchro4 212 vtucPilot2 213 vtucTeq 214 vtucEct 215 vtucPilot3 216 vtucPeriodic2 217 vtucTraining2 218 vtucSynchro5 219 vtucMedley 220 vtucSynchro6 221 vtucShowtime 300 vturG9941 301 vturQuiet1 302 vturChDiscov1 303 vturSynchro1 304 vturLineprobe 305 vturPeriodic1 306 vturSynchro2 307 vturChDiscov2 308 vturSynchro3 309 vturQuiet2 310 vturTraining1 311 vturSynchro4 312 vturTeq 313 vturQuiet3 314 vturEct 315 vturPeriodic2 316 vturTraining2 317 vturSynchro5 318 vturMedley 319 vturSynchro6 320 vturShowtime	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.31
zxAnXdsl2LnStatusLastStateUs The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line.	VDSL2-LINE-TC-MIBXdsl2LastTransmittedState Type Values: 0 atucG9941 1 atucQuiet1 2 atucComb1 3 atucQuiet2 4 atucComb2 5 atucIcomb1 6 atucLineprob 7 atucQuiet3 8 atucComb3 9 atucIComb2 10 atucMsgfmt 11 atucMsgpcb 12 atucQuiet4 13 atucReverb1 14 atucTref1 15 atucReverb2 16 atucEct 17 atucReverb3 18 atucTref2 19 atucReverb4 20 atucSegue1 21 atucMsg1 22 atucReverb5 23 atucSegue2 24 atucMedley 25 atucExchmarker 26 atucMsg2 27 atucReverb6 28 atucSegue3 29 atucParams 30 atucReverb7 31 atucSegue4 32 atucShowtime 100 aturG9941 101 aturQuiet1 102 aturComb1 103 aturQuiet2 104 aturComb2 105 aturIcomb1 106 aturLineprob 107 aturQuiet3 108 aturComb3 109 aturIcomb2 110 aturMsgfmt 111 aturMsgpcb 112 aturReverb1 113 aturQuiet4 114 aturReverb2 115 aturQuiet5 116 aturReverb3 117 aturEct 118 aturReverb4 119 aturSegue1 120 aturReverb5 121 aturSegue2 122 aturMsg1 123 aturMedley 124 aturExchmarker 125 aturMsg2 126 aturReverb6 127 aturSegue3 128 aturParams 129 aturReverb7 130 aturSegue4 131 aturShowtime 200 vtucG9941 201 vtucQuiet1 202 vtucChDiscov1 203 vtucSynchro1 204 vtucPilot1 205 vtucQuiet2 206 vtucPeriodic1 207 vtucSynchro2 208 vtucChDiscov2 209 vtucSynchro3 210 vtucTraining1 211 vtucSynchro4 212 vtucPilot2 213 vtucTeq 214 vtucEct 215 vtucPilot3 216 vtucPeriodic2 217 vtucTraining2 218 vtucSynchro5 219 vtucMedley 220 vtucSynchro6 221 vtucShowtime 300 vturG9941 301 vturQuiet1 302 vturChDiscov1 303 vturSynchro1 304 vturLineprobe 305 vturPeriodic1 306 vturSynchro2 307 vturChDiscov2 308 vturSynchro3 309 vturQuiet2 310 vturTraining1 311 vturSynchro4 312 vturTeq 313 vturQuiet3 314 vturEct 315 vturPeriodic2 316 vturTraining2 317 vturSynchro5 318 vturMedley 319 vturSynchro6 320 vturShowtime	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.32
zxAnXdsl2LnStatusXtur Indicates current state (existing failures) of the xTU-R. This is a bit-map of possible conditions. This BITS structure can report the following failures: noDefect (0) - This bi…	Bits Enumerated Values: 0 noDefect 1 lossOfFraming 2 lossOfSignal 3 lossOfPower 4 unused 5 lossOfSignalQuality	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.33
zxAnXdsl2LnStatusXtuc Indicates current state (existing failures) of the xTU-C. This is a bit-map of possible conditions. This BITS structure can report the following failures: noDefect (0) - This bi…	Bits Enumerated Values: 0 noDefect 1 lossOfFraming 2 lossOfSignal 3 lossOfPower 4 initFailure 5 lossOfSignalQuality 6 lossOfLink	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.34
zxAnXdsl2LnStatusAttainRateDs Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the xTU-C transmitter and the xTU-R receiver, coded in bit/s.	kbpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.35
zxAnXdsl2LnStatusAttainRateUs Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the xTU-R transmitter and the xTU-C receiver, coded in bit/s.	kbpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.36
zxAnXdsl2LnStatusActPsdDs Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (Physical values are -90 to 0 dBm/Hz). A value of…	0.1 dBm/HzInteger32 Constraints: range: -900-0 range: 2147483647-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.37
zxAnXdsl2LnStatusActPsdUs Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (Physical values are -90 to 0 dBm/Hz). A value of 0x7FFF…	0.1 dBm/HzInteger32 Constraints: range: -900-0 range: 2147483647-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.38
zxAnXdsl2LnStatusActAtpDs Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (Physical …	0.1 dBmInteger32 Constraints: range: -310-310 range: 2147483647-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.39
zxAnXdsl2LnStatusActAtpUs Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the xTU-R at the U-R reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dB (Physical va…	0.1 dBmInteger32 Constraints: range: -310-310 range: 2147483647-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.40
zxAnXdsl2LnStatusActProfile Actual Standard Profile used by this connection.	VDSL2-LINE-TC-MIBXdsl2LineProfiles Type Values: 0 profile8a 1 profile8b 2 profile8c 3 profile8d 4 profile12a 5 profile12b 6 profile17a 7 profile30a	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.41
zxAnXdsl2LnStatusActLimitMask The Limit PSD mask and band plan in use. The configuration parameter xdsl2LConfPrfLimitMask defines the set of allowed G.993.2 limit PSD masks. This parameter indicates the limit PSD mask in use on this line.	VDSL2-LINE-TC-MIBXdsl2LineLimitMask Type Values: 0 profile8Limit1 1 profile8Limit2 2 profile8Limit3 3 profile8Limit4 4 profile8Limit5 5 profile8Limit6 6 profile8Limit7 7 profile8Limit8 8 profile8Limit9 9 profile8Limit10 10 profile8Limit11 11 profile8Limit12 12 profile8Limit13 13 profile8Limit14 14 profile8Limit15 15 profile8Limit16 16 profile12Limit1 17 profile12Limit2 18 profile12Limit3 19 profile12Limit4 20 profile12Limit5 21 profile12Limit6 22 profile12Limit7 23 profile12Limit8 24 profile12Limit9 25 profile12Limit10 26 profile12Limit11 27 profile12Limit12 28 profile12Limit13 29 profile12Limit14 30 profile12Limit15 31 profile12Limit16 32 profile17Limit1 33 profile17Limit2 34 profile17Limit3 35 profile17Limit4 36 profile17Limit5 37 profile17Limit6 38 profile17Limit7 39 profile17Limit8 40 profile17Limit9 41 profile17Limit10 42 profile17Limit11 43 profile17Limit12 44 profile17Limit13 45 profile17Limit14 46 profile17Limit15 47 profile17Limit16 48 profile30Limit1 49 profile30Limit2 50 profile30Limit3 51 profile30Limit4 52 profile30Limit5 53 profile30Limit6 54 profile30Limit7 55 profile30Limit8 56 profile30Limit9 57 profile30Limit10 58 profile30Limit11 59 profile30Limit12 60 profile30Limit13 61 profile30Limit14 62 profile30Limit15 63 profile30Limit16	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.42
zxAnXdsl2LnStatusActUs0Mask The US0 PSD mask in use. The configuration parameter xdsl2LConfPrfUs0Mask defines the set of allowed US0 PSD masks. This parameter indicates the US0 PSD mask in use on this line. This parameter may be derived from the h…	VDSL2-LINE-TC-MIBXdsl2LineUs0Mask Type Values: 0 eu32 1 eu36 2 eu40 3 eu44 4 eu48 5 eu52 6 eu56 7 eu60 8 eu64 9 eu128 10 reserved1 11 reserved2 12 reserved3 13 reserved4 14 reserved5 15 reserved6 16 adlu32 17 adlu36 18 adlu40 19 adlu44 20 adlu48 21 adlu52 22 adlu56 23 adlu60 24 adlu64 25 adlu128 26 reserved7 27 reserved8 28 reserved9 29 reserved10 30 reserved11 31 reserved12	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.43
zxAnXdsl2LnStatusActSnrModeDs This parameter indicates if the transmitter referred virtual noise is active on the line in the downstream direction.	VDSL2-LINE-TC-MIBXdsl2LineSnrMode Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.44
zxAnXdsl2LnStatusActSnrModeUs This parameter indicates if the transmitter referred virtual noise is active on the line in the upstream direction.	VDSL2-LINE-TC-MIBXdsl2LineSnrMode Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.45
zxAnXdsl2LnStatusActElPolicy The actual UPBO kl0 policy.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.46
zxAnXdsl2LnStatusElectLenDs (UPBOKLE) This parameter contains the estimated electrical length of downstream expressed in dB at 1 MHz, kl0. This is the final electrical length that would have been sent from the VTU-O to VTU-R if the electrical leng…	0.1 dBUnsigned32 Constraints: range: 0-1280	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.47
zxAnXdsl2LnStatusElectLenUs (UPBOKLE) This parameter contains the estimated electrical length of upstream expressed in dB at 1 MHz, kl0. This is the final electrical length that would have been sent from the VTU-O to VTU-R if the electrical length…	0.1 dBUnsigned32 Constraints: range: 0-1280	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.48
zxAnXdsl2LnStatusActKl0 The actual kl0 used by the line.	0.1 dBUnsigned32 Constraints: range: 0-1280	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.49
zxAnXdsl2LnStatusTssiDs The transmit spectrum shaping (TSSi) breakpoints of downstream expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 octets with the following structure: First 2 o…	VDSL2-LINE-TC-MIBXdsl2Tssi Type Constraints: range: 0..96	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.50
zxAnXdsl2LnStatusTssiUs The transmit spectrum shaping (TSSi) breakpoints of upstream expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 octets with the following structure: First 2 oct…	VDSL2-LINE-TC-MIBXdsl2Tssi Type Constraints: range: 0..96	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.51
zxAnXdsl2LnStatusMrefPsdDs The MEDLEY Reference PSD status parameters on downstreasm direction expressed as the set of breakpoints exchanged at initialization. The OCTET STRING contains up to 48 pairs of values in the following structure: Octets …	VDSL2-LINE-TC-MIBXdsl2MrefPsdDs Type Constraints: range: 0..192	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.52
zxAnXdsl2LnStatusMrefPsdUs The MEDLEY Reference PSD status parameters on upstreasm direction expressed as the set of breakpoints exchanged at initialization. The OCTET STRING contains up to 32 pairs of values in the following structure: Octets 0&…	VDSL2-LINE-TC-MIBXdsl2MrefPsdUs Type Constraints: range: 0..128	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.53
zxAnXdsl2LnStatusTrellisDs This parameter reports whether trellis coding is in use in the downstream direction.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.54
zxAnXdsl2LnStatusTrellisUs This parameter reports whether trellis coding is in use in the upstream direction.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.55
zxAnXdsl2LnStatusActualCe (ACTUALCE) This parameter reports the cyclic extension used on the line. It is coded as an unsigned integer from 2 to 16 in units of N/32 samples, where 2N is the IDFT size.	N/32 samplesUnsigned32 Constraints: range: 2-16	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.56
zxAnXdsl2LnStatusClassMask (CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask classes. Each class is designed such that the PSD levels of each …	VDSL2-LINE-TC-MIBXdsl2LineClassMask Type Values: 1 none 2 a998ORb997M1cORc998B 3 b997M1xOR998co 4 b997M2x 5 b998M1x 6 b998M2x 7 b998AdeM2x 8 bHpeM1	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.57
zxAnXdsl2LnStatusOperState The operational status of the line.	Enumeration Enumerated Values: 1 idle 2 handshake 3 training 4 testing 5 showtime 6 waiting	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.58
zxAnXdsl2LnStatusActDataPathType Actual data path type of this line.	Enumeration Enumerated Values: 1 atm 2 ptm 3 stm	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.59
zxAnXdsl2LnStatusDataPathType Data path type of this line.	Enumerationr/w Enumerated Values: 1 atm 2 ptm 3 stm 4 auto	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.60
zxAnXdsl2LnStatusBitswapDs Enabled or disabled the Bitswap of downstream.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.61
zxAnXdsl2LnStatusBitswapUs Enabled or disabled the Bitswap of upstream.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.62
zxAnXdsl2LnStatusHighRateLimit Enabled or disabled the high rate limitation.	Enumerationr/w Enumerated Values: 1 noLimit 2 limited	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.63
zxAnXdsl2LnExtConfPrf The value of this object identifies the row in the xDSL2 Line Dpbo Profile Table, (zxAnXdsl2LnExtConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.64
zxAnXdsl2LnStatusPrevAttainRateDs Last Maximum Attainable Data Rate Downstream. The maximum downstream net data rate attainable by the xTU-C transmitter and the xTU-R receiver last time, coded in kbit/s.	kbpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.65
zxAnXdsl2LnStatusPrevAttainRateUs Last Maximum Attainable Data Rate Upstream. The maximum upstream net data rate attainable by the xTU-R transmitter and the xTU-C receiver last time, coded in kbit/s.	kbpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.66
zxAnXdsl2LnCmndPMReset Reset the performance monitoring results of single line. currentPerf(0) - reset the current performance monitoring results. it will affect only current real-time PM object, …	Bitsr/w Enumerated Values: 0 currentPerf	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.67
zxAnXdsl2LnInpEtrDs The expected throughput (ETR).	kbpsUnsigned32 Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.81
zxAnXdsl2LnInpEtrUs The expected throughput (ETR).	kbpsUnsigned32 Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.82
zxAnXdsl2LnInpEftrDs The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected to contain no error at the moment of crossing the alpha1/…	kbpsUnsigned32 Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.83
zxAnXdsl2LnInpEftrUs The error-free throughput (EFTR is defined as the average bit-rate at the alpha1/beta1 reference point, of bits originating from DTU's which have been detected to contain no error at the moment of crossing the alpha1/…	kbpsUnsigned32 Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.84
zxAnXdsl2LnInpMinEftrDsdeprecated The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min.	kbpsUnsigned32 Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.85
zxAnXdsl2LnInpMinEftrUsdeprecated The minimum error-free throughput (EFTR_min is defined as the minimum of the EFTR observed since the last reading of the EFTR_min.	kbpsUnsigned32 Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.86
zxAnXdsl2LnInpActDelayDs If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the alfa1 and beta1 reference points. This can be calculated…	msInteger32 Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.87
zxAnXdsl2LnInpActDelayUs If retransmission is used in a given transmit direction, this Object is defined as the actual value of the time-independent component of the delay between the alfa1 and beta1 reference points. This can be calculated…	msInteger32 Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.88
zxAnXdsl2LnFextCancellationDs Enable/disable downstream FEXT cancellation. This configuration parameter shall be defined for each line in a group of vectored lines. It enables or disables FEXT cancellation from all the other vectored lines into a …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.89
zxAnXdsl2LnFextCancellationUs Enable/disable upstream FEXT cancellation. This configuration parameter shall be defined for each line in a group of vectored lines. It enables or disables FEXT cancellation from all the other vectored lines into a li…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.90
zxAnXdsl2LnSosConfPrf The value of this object identifies the row in the xDSL2 Line SOS Profile Table, (zxAnXdsl2SosConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.91
zxAnXdsl2LnStatusLnAttenDs Downstream line Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carrier…	0.1 dBInteger32 Constraints: range: 0-1270	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.92
zxAnXdsl2LnStatusLnAttenUs Upstream line Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carriers …	0.1 dBInteger32 Constraints: range: 0-1270	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.93
zxAnXdsl2LnStatusSigAttenDs Downstream signal Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carri…	0.1 dBInteger32 Constraints: range: 0-1270	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.94
zxAnXdsl2LnStatusSigAttenUs Upstream signal Attenuation. When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carrier…	0.1 dBInteger32 Constraints: range: 0-1270	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.95
zxAnXdsl2LnStatusSnrMarginDs SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for a…	0.1 dBInteger32 Constraints: range: -640-630	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.96
zxAnXdsl2LnStatusSnrMarginUs SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for a…	0.1 dBInteger32 Constraints: range: -640-630	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.97
zxAnXdsl2LnInmConfPrf The value of this object identifies the row in the xDSL2 Line INM Profile Table, (zxAnXdsl2InmConfPrfTable), which applies for this line. This object MUST be maintained in a persistent manner.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.98
zxAnXdsl2LnLofStatsDs Downstream count of times that there was LOF.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.99
zxAnXdsl2LnLofStatsUs Upstream count of times that there was LOF.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.100
zxAnXdsl2LnLolStatsDs Downstream count of times that there was LOL.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.101
zxAnXdsl2LnLolStatsUs Upstream count of times that there was LOF.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.102
zxAnXdsl2LnLprStatsDs Downstream count of times that there was LPR.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.103
zxAnXdsl2LnLprStatsUs Upstream count of times that there was LPR.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.104
zxAnXdsl2LnActInpShineDs The test parameter INP_act_SHINE is defined as the actual INP against SHINE of the latency path with retransmission under following specific conditions: Assuming impulse noise protection against REIN equal to INPmin_re…	DMT SymbolSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.105
zxAnXdsl2LnActInpShineUs The test parameter INP_act_SHINE is defined as the actual INP against SHINE of the latency path with retransmission under following specific conditions: Assuming impulse noise protection against REIN equal to INPmin_re…	DMT SymbolSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.106
zxAnXdsl2LnActInpReinDs The test parameter INP_act_REIN is defined as the minimum of 1) the actual INP against REIN of the latency path with retransmission under the following specific conditions: Assuming impulse noise protection against REI…	DMT SymbolSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.107
zxAnXdsl2LnActInpReinUs The test parameter INP_act_REIN is defined as the minimum of 1) the actual INP against REIN of the latency path with retransmission under the following specific conditions: Assuming impulse noise protection against REI…	DMT SymbolSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.108
zxAnXdsl2LnStatusActRaModeDs This parameter indicates the actual active RA-MODE in the downstream direction. If ACT-RA-MODEds equals 1, the link is operating in RA-MODE 1 (MANUAL). If ACT-RA-MODEds equals 2, the link is operating in RA-MODE 2 (…	Enumeration Enumerated Values: 1 manual 2 atInit 3 dynamic 4 dynamicWithSos	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.109
zxAnXdsl2LnStatusActRaModeUs This parameter indicates the actual active RA-MODE in the upstream direction. If ACT-RA-MODEus equals 1, the link is operating in RA-MODE 1 (MANUAL). If ACT-RA-MODEus equals 2, the link is operating in RA-MODE 2 (AT_…	Enumeration Enumerated Values: 1 manual 2 atInit 3 dynamic 4 dynamicWithSos	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.110
zxAnXdsl2LnStatusRtxUsedDs This parameter specifies whether ITU-T G.998.4 retransmission is used (i.e., active in showtime) in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the parameter in upstream is RTX_USED_us…	Enumeration Enumerated Values: 1 used 2 forbidden 3 xtucUnsupported 4 xturUnsupported 5 xtucAndXturUnsupported	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.111
zxAnXdsl2LnStatusRtxUsedUs This parameter specifies whether ITU-T G.998.4 retransmission is used (i.e., active in showtime) in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the parameter in upstream is RTX_USED_us…	Enumeration Enumerated Values: 1 used 2 forbidden 3 xtucUnsuppoted 4 xturUnsuppoted 5 xtucAndXturUnsuppoted	.1.3.6.1.4.1.3902.1015.1001.1.2.10.1.112

The table zxAnXdsl2LnBandTable contains the,
per-band line status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.
The indexes of this table consist of an interface index where the
interface has an ifType of vdsl2(xxx), together with a
per-band index covering both VDSL2 and ADSL/ADSL2/ADSL2+.
The parameters in this table are updated at
line initialisation time and at showtime.

zxAnXdsl2LnBandEntry row .1.3.6.1.4.1.3902.1015.1001.1.2.11.1

The table zxAnXdsl2LnBandTable contains the,
per-band line status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line.

Indexes

No indexes recorded

Column	Syntax	OID
zxAnXdsl2LineBandStatusPrevSnrMargin The Last SNR Margin. SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requi…	0.1 dBInteger32 Constraints: range: -640-630 range: 2147483646-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.2.11.1.1

The DsDataRate Profile contains the downstream parameters related to the service 
offer of all bearers.
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2DsDataRateConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.10.1

The table zxAnXdsl2DsDataRateConfPrfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to …

Indexes

zxAnXdsl2DsDataRateConfPrfName

Column	Syntax	OID
zxAnXdsl2DsDataRateConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.1
zxAnXdsl2ChConfChannRaRatioDs Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio refers to the available data rate in excess of the Minimum D…	percentsUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.2
zxAnXdsl2ChConfMinDataRateDs Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.3
zxAnXdsl2ChConfMaxDataRateDs Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.4
zxAnXdsl2ChConfMinResRateDs Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode in the direction of the bearer cha…	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.5
zxAnXdsl2ChConfMinRateLowPwrDs Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1 in G.992.2, L2 in G.992.3).	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.6
zxAnXdsl2ChConfMaxBerDs Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7): eminus3 (1), eminus5 (2), eminus…	VDSL2-LINE-TC-MIBXdsl2MaxBerr/w Type Values: 1 eminus3 2 eminus5 3 eminus7	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.7
zxAnXdsl2ChConfDsDataRateDs Data Rate Threshold Downshift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstream data rate is below the data rate at the last entry into Showtime, by more than the thresh…	bits/secondUnsigned32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.8
zxAnXdsl2ChConfUsDataRateDs Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream data rate exceeds, by more than the threshold, the data rate at the last entry into Showtim…	bits/secondUnsigned32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.9
zxAnXdsl2ChConfMinSosBitRateDs This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned integer representing the data rate as a multiple of 8 kbit/s.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.10
zxAnXdsl2DsDataRatePrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.10.1.80

The UsDataRate Profile contains the upstream parameters related to the service 
offer of all bearers.
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2UsDataRateConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.11.1

The table zxAnXdsl2UsDataRateConfPrfTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ basic configuration profile.

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to …

Indexes

zxAnXdsl2UsDataRateConfPrfName

Column	Syntax	OID
zxAnXdsl2UsDataRateConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.1
zxAnXdsl2ChConfChannRaRatioUs Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refers to the available data rate in excess of the Minimum Dat…	percentsUnsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.2
zxAnXdsl2ChConfMinDataRateUs Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.3
zxAnXdsl2ChConfMaxDataRateUs Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.4
zxAnXdsl2ChConfMinResRateUs Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the Rate Adaptation Mode in the direction of the bearer chann…	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.5
zxAnXdsl2ChConfMinRateLowPwrUs Minimum Data Rate in Low Power state on upstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1 in G.992.2, L2 in G.992.3).	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.6
zxAnXdsl2ChConfMaxBerUs Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 or 1E-7): eminus3 (1), eminus5 (2), eminus7 (3)	VDSL2-LINE-TC-MIBXdsl2MaxBerr/w Type Values: 1 eminus3 2 eminus5 3 eminus7	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.7
zxAnXdsl2ChConfDsDataRateUs Data Rate Threshold Downshift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream data rate is below the data rate at the last entry into Showtime, by more than the threshold.…	bits/secondUnsigned32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.8
zxAnXdsl2ChConfUsDataRateUs Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data rate exceeds, by more than the threshold, the data rate at the last entry into Showtime. …	bits/secondUnsigned32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.9
zxAnXdsl2ChConfMinSosBitRateUs This parameter specifies the minimum net data rate required for a valid SOS request in the upstream direction. The value shall be coded as an unsigned integer representing the data rate as a multiple of 8 kbit/s.	kbpsUnsigned32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.10
zxAnXdsl2UsDataRatePrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.11.1.80

The Line Spectrum Profile contains the parameters that identify the 
basic characteristics of the spectrum used on the line 
(xDSL mode, PSD, aggregate power).
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2SpectrumConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.12.1

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document

Indexes

zxAnXdsl2SpectrumConfPrfName

Column	Syntax	OID
zxAnXdsl2SpectrumConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.1
zxAnXdsl2LConfXtuTransSysEna xTU Transmission System Enabling (xTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the xTUs may apply …	ZTE-AN-XDSL2-MIBZxAnXdsl2TransmissionModeTyper/w Type Values: 0 ansit1413 1 etsi 2 g9921PotsNonOverlapped 3 g9921PotsOverlapped 4 g9921IsdnNonOverlapped 5 g9921isdnOverlapped 6 g9921tcmIsdnNonOverlapped 7 g9921tcmIsdnOverlapped 8 g9922potsNonOverlapeed 9 g9922potsOverlapped 10 g9922tcmIsdnNonOverlapped 11 g9922tcmIsdnOverlapped 12 g9921tcmIsdnSymmetric 13 reserved1 14 reserved2 15 reserved3 16 reserved4 17 reserved5 18 g9923PotsNonOverlapped 19 g9923PotsOverlapped 20 g9923IsdnNonOverlapped 21 g9923isdnOverlapped 22 reserved6 23 reserved7 24 g9924potsNonOverlapeed 25 g9924potsOverlapped 26 reserved8 27 reserved9 28 g9923AnnexIAllDigNonOverlapped 29 g9923AnnexIAllDigOverlapped 30 g9923AnnexJAllDigNonOverlapped 31 g9923AnnexJAllDigOverlapped 32 g9924AnnexIAllDigNonOverlapped 33 g9924AnnexIAllDigOverlapped 34 g9923AnnexLMode1NonOverlapped 35 g9923AnnexLMode2NonOverlapped 36 g9923AnnexLMode3Overlapped 37 g9923AnnexLMode4Overlapped 38 g9923AnnexMPotsNonOverlapped 39 g9923AnnexMPotsOverlapped 40 g9925PotsNonOverlapped 41 g9925PotsOverlapped 42 g9925IsdnNonOverlapped 43 g9925isdnOverlapped 44 reserved10 45 reserved11 46 g9925AnnexIAllDigNonOverlapped 47 g9925AnnexIAllDigOverlapped 48 g9925AnnexJAllDigNonOverlapped 49 g9925AnnexJAllDigOverlapped 50 g9925AnnexMPotsNonOverlapped 51 g9925AnnexMPotsOverlapped 52 reserved12 53 g9932AnnexAProtection 54 g9932AnnexBProtection 55 g9932AnnexCProtection 56 g9932AnnexA 57 g9932AnnexB 58 g9932AnnexC 59 reserved16 60 reserved17 61 g9935AnnexA 62 g9935AnnexB 63 g9935AnnexC	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.2
zxAnXdsl2LConfScMaskDs Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1', the respective downstream sub-carrier i is masked, and …	VDSL2-LINE-TC-MIBXdsl2ScMaskDsr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.3
zxAnXdsl2LConfScMaskUs Sub-carriers mask. A bitmap of 4096 bits that allows masking up to 4096 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1', the respective upstream sub-carrier i is masked, and if…	VDSL2-LINE-TC-MIBXdsl2ScMaskUsr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.4
zxAnXdsl2LConfVdsl2CarMask (VDSL2-CARMASK). VDSL2 specific Sub-carriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allowed for transmission in both upstream and d…	VDSL2-LINE-TC-MIBXdsl2CarMaskr/w Type Constraints: range: 0..128	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.5
zxAnXdsl2LConfMsgMinDs Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed in bits per second and ranges from 4000 to 63000 bps.	kbpsUnsigned32r/w Constraints: range: 4-248	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.6
zxAnXdsl2LConfMsgMinUs Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in bits per second and ranges from 4000 to 63000 bps.	kbpsUnsigned32r/w Constraints: range: 4-248	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.7
zxAnXdsl2LConfCeFlag (CEFLAG). This parameter is a bit that enables the use of the optional cyclic extension values. If the bit is set to 1, the optional cyclic extension values may be used. Otherwise, the cyclic extension shall be forced t…	VDSL2-LINE-TC-MIBXdsl2LineCeFlagr/w Type Values: 0 enableCyclicExtension	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.8
zxAnXdsl2LConfPmMode Power management state Enabling (PMMode). Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. The various bit positions are: allowTransitionsToIdle (0) and allowTransitionsToLowPowe…	VDSL2-LINE-TC-MIBXdsl2LinePmModer/w Type Values: 0 allowTransitionsToIdle 1 allowTransitionsToLowPower	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.9
zxAnXdsl2LConfL0Time The minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state (L0-TIME). It ranges from 0 to 255 seconds.	secondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.10
zxAnXdsl2LConfL2Time The minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State (L2-TIME). It ranges from 0 to 255 seconds.	secondsUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.11
zxAnXdsl2LConfL2Atpr The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state (L2-ATPR). It ranges from 0 dB to 31 dB.	dBUnsigned32r/w Constraints: range: 0-31	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.12
zxAnXdsl2LConfL2Atprt The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and Power Trims (L2-ATPRT).	dBUnsigned32r/w Constraints: range: 0-31	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.13
zxAnXdsl2LConfProfiles The configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line (PROFILES). It is coded in a bitmap representation (0 if not allowed, 1 if allowed)	VDSL2-LINE-TC-MIBXdsl2LineProfilesr/w Type Values: 0 profile8a 1 profile8b 2 profile8c 3 profile8d 4 profile12a 5 profile12b 6 profile17a 7 profile30a	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.14
zxAnXdsl2LConfUs0Mask The set of profiles which allows the transceivers to support a subset of allowed settings, as defined in G.993.2 Recommendation.	VDSL2-LINE-TC-MIBXdsl2LineUs0Maskr/w Type Values: 0 eu32 1 eu36 2 eu40 3 eu44 4 eu48 5 eu52 6 eu56 7 eu60 8 eu64 9 eu128 10 reserved1 11 reserved2 12 reserved3 13 reserved4 14 reserved5 15 reserved6 16 adlu32 17 adlu36 18 adlu40 19 adlu44 20 adlu48 21 adlu52 22 adlu56 23 adlu60 24 adlu64 25 adlu128 26 reserved7 27 reserved8 28 reserved9 29 reserved10 30 reserved11 31 reserved12	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.15
zxAnXdsl2SpectrumPrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.12.1.30

The DPBO Profile contains all the parameters related to the 
ownstream PBO shaping.
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2DpboConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.13.1

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document

Indexes

zxAnXdsl2DpboConfPrfName

Column	Syntax	OID
zxAnXdsl2DpboConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.1
zxAnXdsl2LConfDpboEPsd (DPBOEPSD). This configuration parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as zxAnXdsl2LConfPsdMaskDs (PSDMASKds). The maximum number of break…	VDSL2-LINE-TC-MIBXdsl2PsdMaskDsr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.2
zxAnXdsl2LConfDpboEsEL (DPBOESEL). This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subje…	0.5 dBUnsigned32r/w Constraints: range: 0-511	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.3
zxAnXdsl2LConfDpboEscmA (DPBOESCMA). The E-side Cable Model parameter A (DPBOESCMA) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject t…	2^-8Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.4
zxAnXdsl2LConfDpboEscmB (DPBOESCMB). The E-side Cable Model parameter B (DPBOESCMB) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject t…	2^-8Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.5
zxAnXdsl2LConfDpboEscmC (DPBOESCMC). The E-side Cable Model parameter C (DPBOESCMC) of the cable model (DPBOESCM) for cables connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject t…	2^-8Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.6
zxAnXdsl2LConfDpboMus (DPBOMUS). This configuration parameter defines the assumed Minimum Usable receive PSD mask (in dBm/Hz) for exchange based services, used to modify parameter zxAnXdsl2LConfDpboFMax (DPBOFMAX) defined below [to determine…	0.5 dBUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.7
zxAnXdsl2LConfDpboFMin (DPBOFMIN). This configuration parameter defines the minimum frequency from which the DPBO shall be applied. It ranges from 0 kHz (coded as 0) to 8832 kHz (coded as 2048) in steps of 4.3125 kHz. This parameter is used o…	4.3125 kHzUnsigned32r/w Constraints: range: 0-2048	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.8
zxAnXdsl2LConfDpboFMax (DPBOFMAX). This configuration parameter defines the maximum frequency at which DPBO may be applied. It ranges from 138 kHz (coded as 32) to 29997.75 kHz (coded as 6956) in steps of 4.3125 kHz. This parameter is used on…	4.3125 kHzUnsigned32r/w Constraints: range: 32-6956	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.9
zxAnXdsl2DpboConfPrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.13.1.30

The UPBO Profile contains all the parameters related to the 
Upstream PBO shaping.
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2UpboConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.14.1

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document

Indexes

zxAnXdsl2LUpboConfPrfName

Column	Syntax	OID
zxAnXdsl2LUpboConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.1
zxAnXdsl2LConfUpboKL (UPBOKL). This configuration parameter defines the electrical length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. This parame…	0.1 dBUnsigned32r/w Constraints: range: 0-1280	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.2
zxAnXdsl2LConfUpboKLF Defines the upstream power backoff force mode (UPBOKLF).	VDSL2-LINE-TC-MIBXdsl2UpboKLFr/w Type Values: 1 auto 2 override 3 disableUpbo	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.3
zxAnXdsl2LConfUpboU1bandPsdA (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.4
zxAnXdsl2LConfUpboU1bandPsdB (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.5
zxAnXdsl2LConfUpboU2bandPsdA (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.6
zxAnXdsl2LConfUpboU2bandPsdB (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.7
zxAnXdsl2LConfUpboU3bandPsdA (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.8
zxAnXdsl2LConfUpboU3bandPsdB (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.9
zxAnXdsl2LConfUpboU4bandPsdA (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 4000-8095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.10
zxAnXdsl2LConfUpboU4bandPsdB (UPBOPSD-pb). This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off for the upstream band. A UPBOPSD defined for each band shall consist o…	0.01 dBm/HzUnsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.11
zxAnXdsl2LConfUpboU1bandKLRef This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.…	0.1 dBSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.12
zxAnXdsl2LConfUpboU2bandKLRef This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.…	0.1 dBSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.13
zxAnXdsl2LConfUpboU3bandKLRef This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.…	0.1 dBSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.14
zxAnXdsl2LConfUpboU4bandKLRef This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equalized FEXT UPBO method. The value ranges from 1.8 to 63.…	0.1 dBSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.15
zxAnXdsl2LUpboConfPrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.14.1.30

The Noise Margin Profile contains all the noise margin parameters 
to be defined for the line.
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2SnrMarginConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.15.1

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document

Indexes

zxAnXdsl2SnrMarginConfPrfName

Column	Syntax	OID
zxAnXdsl2SnrMarginConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.1
zxAnXdsl2LConfTargetSnrmDs The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete initialization. The target no…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.2
zxAnXdsl2LConfTargetSnrmUs The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete initialization. The target nois…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.3
zxAnXdsl2LConfMaxSnrmDs The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xTU-C transmit power to get a noise margin below this limit (…	0.1 dBUnsigned32r/w Constraints: range: 0-310 range: 2147483647-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.4
zxAnXdsl2LConfMaxSnrmUs The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xTU-R transmit power to get a noise margin below this limit (…	0.1 dBUnsigned32r/w Constraints: range: 0-310 range: 2147483647-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.5
zxAnXdsl2LConfMinSnrmDs The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU-C transmit power. If an increase to xTU-C transmit power is…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.6
zxAnXdsl2LConfMinSnrmUs The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU-R transmit power. If an increase of xTU-R transmit power is…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.7
zxAnXdsl2LConfRaUsNrmDs The Downstream Up-Shift Noise Margin value, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. If the downstream noise margin is above this value and stays above it for more than the time specified by the zxAn…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.8
zxAnXdsl2LConfRaUsNrmUs The Upstream Up-Shift Noise Margin value, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. If the upstream noise margin is above this value and stays above it for more than the time specified by the zxAnXdsl…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.9
zxAnXdsl2LConfRaUsTimeDs The Downstream Up-Shift Time Interval, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. The interval of time that the downstream noise margin should stay above the Downstream Up-shift Noise Margin before the…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.10
zxAnXdsl2LConfRaUsTimeUs The Upstream Up-Shift Time Interval, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay above the Upstream Up-shift Noise Margin before the xTU-C shal…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.11
zxAnXdsl2LConfRaDsNrmDs The Downstream Down-Shift Noise Margin value, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. If the downstream noise margin is below this value and stays below that for more than the time specified by t…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.12
zxAnXdsl2LConfRaDsNrmUs The Upstream Downshift Noise Margin value, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. If the upstream noise margin is below this value and stays below that for more than the time specified by the zxAnX…	0.1 dBUnsigned32r/w Constraints: range: 0-310	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.13
zxAnXdsl2LConfRaDsTimeDs The Downstream Downshift Time Interval, to be used when zxAnXdsl2LConfRaModeDs is set to dynamicRa. The interval of time the downstream noise margin should stay below the Downstream Down-shift Noise Margin before the x…	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.14
zxAnXdsl2LConfRaDsTimeUs The Upstream Down-Shift Time Interval, to be used when zxAnXdsl2LConfRaModeUs is set to dynamicRa. The interval of time the upstream noise margin should stay below the Upstream Down-shift Noise Margin before the xTU-C …	secondsUnsigned32r/w Constraints: range: 0-16383	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.15
zxAnXdsl2LConfSnrModeDs This parameter enables/disables the transmitter referred virtual noise in the downstream direction.	VDSL2-LINE-TC-MIBXdsl2LineSnrModer/w Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.16
zxAnXdsl2LConfSnrModeUs This parameter enables/disables the transmitter referred virtual noise in the upstream direction.	VDSL2-LINE-TC-MIBXdsl2LineSnrModer/w Type Values: 1 virtualNoiseDisabled 2 virtualNoiseEnabled	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.17
zxAnXdsl2LConfRaModeDs The mode of operation of a rate-adaptive xTU-C in the transmit direction. The parameter can take three values: fixed (1), raInit (2), dynamicRa (3).	VDSL2-LINE-TC-MIBXdsl2RaModer/w Type Values: 1 manual 2 raInit 3 dynamicRa	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.18
zxAnXdsl2LConfRaModeUs The mode of operation of a rate-adaptive xTU-R in the transmit direction. The parameter can take three values: fixed (1), raInit (2), dynamicRa (3).	VDSL2-LINE-TC-MIBXdsl2RaModer/w Type Values: 1 manual 2 raInit 3 dynamicRa	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.19
zxAnXdsl2SnrMarginConfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.15.1.30

The Delay-Inp Profile contains the INP and Delay values to be 
defined for the enabled bearer.
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2DelayInpConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.16.1

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document

Indexes

zxAnXdsl2DelayInpConfPrfName

Column	Syntax	OID
zxAnXdsl2DelayInpConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.1
zxAnXdsl2ChConfMaxDelayDs Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The xTUs shall choose the S (factor) and D (depth) values such that the actu…	millisecondsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.2
zxAnXdsl2ChConfMaxDelayUs Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The xTUs shall choose the S (factor) and D (depth) values such that the actual one…	millisecondsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.3
zxAnXdsl2ChConfMinProtectDs Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not re…	symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtectionr/w Type Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 threeSymbols 6 fourSymbols 7 fiveSymbols 8 sixSymbols 9 sevenSymbols 10 eightSymbols 11 nineSymbols 12 tenSymbols 13 elevenSymbols 14 twelveSymbols 15 thirteeSymbols 16 fourteenSymbols 17 fifteenSymbols 18 sixteenSymbols	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.4
zxAnXdsl2ChConfMinProtectUs Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols.	symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtectionr/w Type Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 threeSymbols 6 fourSymbols 7 fiveSymbols 8 sixSymbols 9 sevenSymbols 10 eightSymbols 11 nineSymbols 12 tenSymbols 13 elevenSymbols 14 twelveSymbols 15 thirteeSymbols 16 fourteenSymbols 17 fifteenSymbols 18 sixteenSymbols	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.5
zxAnXdsl2ChConfMinProtect8Ds (INPMIN8ds). This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed i…	symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtection8r/w Type Values: 1 noProtection 2 singleSymbol 3 twoSymbols 4 threeSymbols 5 fourSymbols 6 fiveSymbols 7 sixSymbols 8 sevenSymbols 9 eightSymbols 10 nineSymbols 11 tenSymbols 12 elevenSymbols 13 twelveSymbols 14 thirteeSymbols 15 fourteenSymbols 16 fifteenSymbols 17 sixteenSymbols	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.6
zxAnXdsl2ChConfMinProtect8Us (INPMIN8us). This parameter specifies the minimum impulse noise protection for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 8.625 kHz. The impulse noise protection is expressed i…	symbolsVDSL2-LINE-TC-MIBXdsl2SymbolProtection8r/w Type Values: 1 noProtection 2 singleSymbol 3 twoSymbols 4 threeSymbols 5 fourSymbols 6 fiveSymbols 7 sixSymbols 8 sevenSymbols 9 eightSymbols 10 nineSymbols 11 tenSymbols 12 elevenSymbols 13 twelveSymbols 14 thirteeSymbols 15 fourteenSymbols 16 fifteenSymbols 17 sixteenSymbols	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.7
zxAnXdsl2ChConfForceInpDs Enable /disable force to use INP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.8
zxAnXdsl2ChConfForceInpUs Enable /disable force to use INP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.9
zxAnXdsl2ChConfMaxDelayVar Maximum delay variation (DVMAX). This optional VDSL2 specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254 units of 0.1 milliseconds (i.e., 0.1 to…	0.1 millisecondsUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.10
zxAnXdsl2ChConfInitPolicy Channel Initialization Policy Selection (CIPOLICY). This optional parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY …	VDSL2-LINE-TC-MIBXdsl2ChInitPolicyr/w Type Values: 1 policy0 2 policy1	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.11
zxAnXdsl2DIConfPrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.16.1.80

The Line Virtual Noise Profile Table.

zxAnXdsl2VirtualNoiseConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.17.1

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document

Indexes

zxAnXdsl2VirtualNoiseConfPrfName

Column	Syntax	OID
zxAnXdsl2VirtualNoiseConfPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.17.1.1
zxAnXdsl2LConfTxRefVnDs This configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoints. Each breakpoint shall consist of a subcarrier index t…	OctetStringr/w Constraints: range: 0-96	.1.3.6.1.4.1.3902.1015.1001.1.3.17.1.2
zxAnXdsl2LConfTxRefVnUs This configuration parameter defines the upstream transmitter referred virtual noise (TXREFVNus). The TXREFVNus shall be specified through a set of breakpoints. Each breakpoint shall consist of a subcarrier index t, …	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.3902.1015.1001.1.3.17.1.3
zxAnXdsl2VNConfPrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.17.1.30

The Line RFI Profile Table.

zxAnXdsl2RfiConfPrfEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.18.1

A default profile with an index of 'VDEFVAL' will
always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document

Indexes

zxAnXdsl2LConfRfiPrfName

Column	Syntax	OID
zxAnXdsl2LConfRfiPrfName This object identifies a row in this table.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.3902.1015.1001.1.3.18.1.1
zxAnXdsl2LConfRfiBandsDs RfiBands configured in the downstream.	VDSL2-LINE-TC-MIBXdsl2RfiBandsr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.3902.1015.1001.1.3.18.1.2
zxAnXdsl2RfiConfPrfRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.18.1.30

The table zxAnXdsl2ProfModeSpecTable extends the
DSL line configuration profile by xDSL Mode Specific
parameters.
A row in this table that has an index of
zxAnXdsl2LConfXdslMode == defMode(1), is called a
'mandatory' row.
A row in this table that has an index such that
xdsl2LConfProfXdslMode is not equal to defMode(1),
is called an 'optional' row.
When a row in the zxAnXdsl2SpectrumConfPrfTable table
(the parent row) is created, the SNMP agent will
automatically create a 'mandatory' row in this table.
When the parent row is deleted, the SNMP agent will
automatically delete all associated rows in this table.
Any attempt to delete the 'mandatory' row using the
zxAnXdsl2ProfModeSpecRowStatus attribute will be
rejected by the SNMP agent.
The manager MAY create an 'optional' row in this table
using the zxAnXdsl2ProfModeSpecRowStatus attribute if
the parent row exists.
The manager MAY delete an 'optional' row in this table
using the zxAnXdsl2ProfModeSpecRowStatus attribute at
any time.
If the actual transmission mode of a DSL line does not
match one of the 'optional' rows in this table, then
the line will use the PSD configuration from the
'mandatory' row.
          
Entries in this table MUST be maintained in a
persistent manner.

zxAnXdsl2ProfModeSpecEntry row .1.3.6.1.4.1.3902.1015.1001.1.3.19.1

The table zxAnXdsl2ProfModeSpecTable extends the
DSL line configuration profile by DSL Mode Specific
parameters.

Indexes

zxAnXdsl2SpectrumConfPrfName zxAnXdsl2LConfXdslMode

Column	Syntax	OID
zxAnXdsl2LConfXdslMode The DSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD configuration. There should be multiple entries in this table for a given line profile in…	ZxAnXdsl2OperationModes Type Values: 1 defMode 2 ansit1413 3 etsi 4 g9921PotsNonOverlapped 5 g9921PotsOverlapped 6 g9921IsdnNonOverlapped 7 g9921isdnOverlapped 8 g9921tcmIsdnNonOverlapped 9 g9921tcmIsdnOverlapped 10 g9922potsNonOverlapped 11 g9922potsOverlapped 12 g9922tcmIsdnNonOverlapped 13 g9922tcmIsdnOverlapped 14 g9921tcmIsdnSymmetric 20 g9923PotsNonOverlapped 21 g9923PotsOverlapped 22 g9923IsdnNonOverlapped 23 g9923isdnOverlapped 26 g9924potsNonOverlapped 27 g9924potsOverlapped 30 g9923AnnexIAllDigNonOverlapped 31 g9923AnnexIAllDigOverlapped 32 g9923AnnexJAllDigNonOverlapped 33 g9923AnnexJAllDigOverlapped 34 g9924AnnexIAllDigNonOverlapped 35 g9924AnnexIAllDigOverlapped 36 g9923AnnexLMode1NonOverlapped 37 g9923AnnexLMode2NonOverlapped 38 g9923AnnexLMode3Overlapped 39 g9923AnnexLMode4Overlapped 40 g9923AnnexMPotsNonOverlapped 41 g9923AnnexMPotsOverlapped 42 g9925PotsNonOverlapped 43 g9925PotsOverlapped 44 g9925IsdnNonOverlapped 45 g9925isdnOverlapped 48 g9925AnnexIAllDigNonOverlapped 49 g9925AnnexIAllDigOverlapped 50 g9925AnnexJAllDigNonOverlapped 51 g9925AnnexJAllDigOverlapped 52 g9925AnnexMPotsNonOverlapped 53 g9925AnnexMPotsOverlapped 58 g9932AnnexA 59 g9932AnnexB 60 g9932AnnexC 250 g9932AnnexAProtection 251 g9932AnnexBProtection 252 g9932AnnexCProtection 253 g9935AnnexA 254 g9935AnnexB 255 g9935AnnexC	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.1
zxAnXdsl2LConfMaxNomPsdDs (MAXNOMPSDds). The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz).	0.1 dBm/HzInteger32r/w Constraints: range: -600--300	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.2
zxAnXdsl2LConfMaxNomPsdUs (MAXNOMPSDus). The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz).	0.1 dBm/HzInteger32r/w Constraints: range: -600--300	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.3
zxAnXdsl2LConfMaxNomAtpDs (MAXNOMATPds). The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).	0.1 dBmUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.4
zxAnXdsl2LConfMaxNomAtpUs (MAXNOMATPus). The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).	0.1 dBmUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.5
zxAnXdsl2LConfMaxAggRxPwrUs (MAXRXPWRus). The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this maximum aggregate receive power value is honor…	0.1 dBmInteger32r/w Constraints: range: -255-255 range: 2147483647-2147483647	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.6
zxAnXdsl2LConfPsdMaskDs (PSDMASKds). The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5.…	VDSL2-LINE-TC-MIBXdsl2PsdMaskDsr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.7
zxAnXdsl2LConfPsdMaskUs (PSDMASKus). The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5. T…	VDSL2-LINE-TC-MIBXdsl2PsdMaskUsr/w Type Constraints: range: 0..48	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.8
zxAnXdsl2LConfPsdMaskSelectUs The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in zxAnXdsl2LConfXtuTransSysEna.	VDSL2-LINE-TC-MIBXdsl2LinePsdMaskSelectUsr/w Type Values: 1 adlu32Eu32 2 adlu36Eu36 3 adlu40Eu40 4 adlu44Eu44 5 adlu48Eu48 6 adlu52Eu52 7 adlu56Eu56 8 adlu60Eu60 9 adlu64Eu64	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.9
zxAnXdsl2LConfClassMask (CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask classes. Each class is designed such that the PSD levels of each …	VDSL2-LINE-TC-MIBXdsl2LineClassMaskr/w Type Values: 1 none 2 a998ORb997M1cORc998B 3 b997M1xOR998co 4 b997M2x 5 b998M1x 6 b998M2x 7 b998AdeM2x 8 bHpeM1	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.10
zxAnXdsl2LConfLimitMask (LIMITMASK). This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for each class of profiles. This parameter is define…	VDSL2-LINE-TC-MIBXdsl2LineLimitMaskr/w Type Values: 0 profile8Limit1 1 profile8Limit2 2 profile8Limit3 3 profile8Limit4 4 profile8Limit5 5 profile8Limit6 6 profile8Limit7 7 profile8Limit8 8 profile8Limit9 9 profile8Limit10 10 profile8Limit11 11 profile8Limit12 12 profile8Limit13 13 profile8Limit14 14 profile8Limit15 15 profile8Limit16 16 profile12Limit1 17 profile12Limit2 18 profile12Limit3 19 profile12Limit4 20 profile12Limit5 21 profile12Limit6 22 profile12Limit7 23 profile12Limit8 24 profile12Limit9 25 profile12Limit10 26 profile12Limit11 27 profile12Limit12 28 profile12Limit13 29 profile12Limit14 30 profile12Limit15 31 profile12Limit16 32 profile17Limit1 33 profile17Limit2 34 profile17Limit3 35 profile17Limit4 36 profile17Limit5 37 profile17Limit6 38 profile17Limit7 39 profile17Limit8 40 profile17Limit9 41 profile17Limit10 42 profile17Limit11 43 profile17Limit12 44 profile17Limit13 45 profile17Limit14 46 profile17Limit15 47 profile17Limit16 48 profile30Limit1 49 profile30Limit2 50 profile30Limit3 51 profile30Limit4 52 profile30Limit5 53 profile30Limit6 54 profile30Limit7 55 profile30Limit8 56 profile30Limit9 57 profile30Limit10 58 profile30Limit11 59 profile30Limit12 60 profile30Limit13 61 profile30Limit14 62 profile30Limit15 63 profile30Limit16	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.11
zxAnXdsl2LConfUs0Disable Enable or disable the use of US0.	VDSL2-LINE-TC-MIBXdsl2LineUs0Disabler/w Type Values: 0 profile8Us0Disable1 1 profile8Us0Disable2 2 profile8Us0Disable3 3 profile8Us0Disable4 4 profile8Us0Disable5 5 profile8Us0Disable6 6 profile8Us0Disable7 7 profile8Us0Disable8 8 profile8Us0Disable9 9 profile8Us0Disable10 10 profile8Us0Disable11 11 profile8Us0Disable12 12 profile8Us0Disable13 13 profile8Us0Disable14 14 profile8Us0Disable15 15 profile8Us0Disable16 16 profile12Us0Disable1 17 profile12Us0Disable2 18 profile12Us0Disable3 19 profile12Us0Disable4 20 profile12Us0Disable5 21 profile12Us0Disable6 22 profile12Us0Disable7 23 profile12Us0Disable8 24 profile12Us0Disable9 25 profile12Us0Disable10 26 profile12Us0Disable11 27 profile12Us0Disable12 28 profile12Us0Disable13 29 profile12Us0Disable14 30 profile12Us0Disable15 31 profile12Us0Disable16 32 profile17Us0Disable1 33 profile17Us0Disable2 34 profile17Us0Disable3 35 profile17Us0Disable4 36 profile17Us0Disable5 37 profile17Us0Disable6 38 profile17Us0Disable7 39 profile17Us0Disable8 40 profile17Us0Disable9 41 profile17Us0Disable10 42 profile17Us0Disable11 43 profile17Us0Disable12 44 profile17Us0Disable13 45 profile17Us0Disable14 46 profile17Us0Disable15 47 profile17Us0Disable16 48 profile30Us0Disable1 49 profile30Us0Disable2 50 profile30Us0Disable3 51 profile30Us0Disable4 52 profile30Us0Disable5 53 profile30Us0Disable6 54 profile30Us0Disable7 55 profile30Us0Disable8 56 profile30Us0Disable9 57 profile30Us0Disable10 58 profile30Us0Disable11 59 profile30Us0Disable12 60 profile30Us0Disable13 61 profile30Us0Disable14 62 profile30Us0Disable15 63 profile30Us0Disable16	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.12
zxAnXdsl2ProfModeSpecRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'active' is set, the system will validate the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.30