xdsl2ChStatusInpReport
VDSL2-LINE-MIB ·
.1.3.6.1.2.1.10.251.1.2.2.1.6
Object
column
VDSL2-LINE-TC-MIBXdsl2ChInpReport
Impulse noise protection reporting mode.
Context
- MIB
- VDSL2-LINE-MIB
- OID
.1.3.6.1.2.1.10.251.1.2.2.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- xdsl2ChannelStatusEntry
- Table
- xdsl2ChannelStatusTable
- Siblings
- 13
Syntax
VDSL2-LINE-TC-MIBXdsl2ChInpReport
- Source
- VDSL2-LINE-TC-MIBXdsl2ChInpReport
- Base type
Enumeration
Values & Constraints
Type Values
1 | inpComputedUsingFormula |
2 | inpEstimatedByXtur |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xdsl2ChStatusUnit The termination unit. | column | VDSL2-LINE-TC-MIBXdsl2Unit | .1.3.6.1.2.1.10.251.1.2.2.1.1 |
| xdsl2ChStatusIntlvDepth Actual interleaving depth.
This parameter reports the actual depth of the interleaver used
in the latency path in which the bearer channel is transported.
The value ranges from 1 … | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.10 |
| xdsl2ChStatusIntlvBlock Actual interleaving block length.
This parameter reports the actual block length of the interleaver
used in the latency path in which the bearer channel is
transported.
… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.11 |
| xdsl2ChStatusLPath Actual latency path.
This parameter reports the index of the actual latency path in
which the bearer is transported.
The valid values are 0, 1, 2 and 3.
For G.992.1, the FAST path… | column | Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.12 |
| xdsl2ChStatusAtmStatus Indicates current state (existing failures) of the DSL
channel in case its Data Path is ATM. This is a bitmap of
possible conditions.
In case the channel is not of ATM Data Path,… | column | VDSL2-LINE-TC-MIBXdsl2ChAtmStatus | .1.3.6.1.2.1.10.251.1.2.2.1.13 |
| xdsl2ChStatusPtmStatus Indicates current state (existing failures) of the DSL
channel in case its Data Path is PTM (Packet Transfer Mode).
This is a bitmap of possible conditions.
In case the channel is… | column | VDSL2-LINE-TC-MIBXdsl2ChPtmStatus | .1.3.6.1.2.1.10.251.1.2.2.1.14 |
| xdsl2ChStatusActDataRate The actual net data rate at which the bearer channel is
operating, if in L0 power management state. In L1 or L2
states, it relates to the previous L0 state. The d… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.2 |
| xdsl2ChStatusPrevDataRate The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
p… | column | bits/second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.3 |
| xdsl2ChStatusActDelay The actual one-way interleaving delay introduced by the
PMS-TC in the direction of the bearer channel, if in L0 power
management state. In L1 or L2 states, it relates to the prev… | column | milliseconds Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.4 |
| xdsl2ChStatusActInp Actual impulse noise protection.
This parameter reports the actual impulse noise protection (INP)
on the bearer channel in the L0 state. In the L1 or L2 state,
the… | column | 0.1 symbols Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.5 |
| xdsl2ChStatusNFec Actual size of Reed-Solomon codeword.
This parameter reports the actual number of Reed-Solomon
redundancy bytes per codeword used in the latency path in which
the bearer channel i… | column | bytes Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.7 |
| xdsl2ChStatusRFec Actual number of Reed-Solomon redundancy bytes.
This parameter reports the actual number of Reed-Solomon
redundancy bytes per codeword used in the latency path in w… | column | bits Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.8 |
| xdsl2ChStatusLSymb Actual number of bits per symbol.
This parameter reports the actual number of bits per symbol
assigned to the latency path in which the bearer channel is
transported. This value … | column | bits Unsigned32 | .1.3.6.1.2.1.10.251.1.2.2.1.9 |