ipFwAccViaAddr

UCD-IPFWACC-MIB · .1.3.6.1.4.1.2021.13.1.1.1.7
MIB view Table view

Object

column SNMPv2-SMIIpAddress 
The address of the interface to which the rule applies.
Using this parameter makes sense when multiple addresses are
associated to the same physical interface. If not defined
for the current rule this should be set to 0.

Context

MIB
UCD-IPFWACC-MIB
OID
.1.3.6.1.4.1.2021.13.1.1.1.7
Type
column
Access
readonly
Status
current
Parent
ipFwAccEntry
Table
ipFwAccTable
Siblings
25

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ipFwAccIndex
Reference index for each firewall rule.
columnInteger32.1.3.6.1.4.1.2021.13.1.1.1.1
ipFwAccDir
Whether the rule applies to packets entering or exiting the kernel.
columnEnumeration.1.3.6.1.4.1.2021.13.1.1.1.10
ipFwAccBytes
The number of bytes that matched this rule since the last reset of the counters.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2021.13.1.1.1.11
ipFwAccPackets
The number of packets that matched this rule since the last reset of the counters.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.2021.13.1.1.1.12
ipFwAccNrSrcPorts
The number of ports that refer to the source address.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.13
ipFwAccNrDstPorts
The number of ports that refer to the destination address.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.14
ipFwAccSrcIsRange
Interpret the first two ports of the source part as the upper and lower limit of an interval or not.
columnEnumeration.1.3.6.1.4.1.2021.13.1.1.1.15
ipFwAccDstIsRange
Interpret the first two ports of the destination part as the upper and lower limit of an interval or not.
columnEnumeration.1.3.6.1.4.1.2021.13.1.1.1.16
ipFwAccPort1
Port number 1.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.17
ipFwAccPort2
Port number 2.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.18
ipFwAccPort3
Port number 3.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.19
ipFwAccSrcAddr
The source address in the firewall rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2021.13.1.1.1.2
ipFwAccPort4
Port number 4.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.20
ipFwAccPort5
Port number 5.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.21
ipFwAccPort6
Port number 6.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.22
ipFwAccPort7
Port number 7.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.23
ipFwAccPort8
Port number 8.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.24
ipFwAccPort9
Port number 9.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.25
ipFwAccPort10
Port number 10.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2021.13.1.1.1.26
ipFwAccSrcNetMask
The netmask of the source address in the firewall rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2021.13.1.1.1.3
ipFwAccDstAddr
The destination address in the firewall rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2021.13.1.1.1.4
ipFwAccDstNetMask
The netmask of the destination address in the firewall rule.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2021.13.1.1.1.5
ipFwAccViaName
The name of the interface to which the rule applies. If no interface is associated with the present rule, this should contain a dash (-).
columnOctetString.1.3.6.1.4.1.2021.13.1.1.1.6
ipFwAccProto
The protocol(s) to which the rule applies.
columnEnumeration.1.3.6.1.4.1.2021.13.1.1.1.8
ipFwAccBidir
Whether the rule works in both directions (i.e. with the source and destination parts swapped) or not.
columnEnumeration.1.3.6.1.4.1.2021.13.1.1.1.9