UCD-IPFWACC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
26

ipFwAccTable

table
.1.3.6.1.4.1.2021.13.1.1 · 1 row entry · 26 columns
Open in standard view 
A table with the accounting rules of the IP firewall
ipFwAccEntry entry .1.3.6.1.4.1.2021.13.1.1.1
An accounting rule of the IP firewall
Indexes
ipFwAccIndex
Column Syntax OID
ipFwAccIndex
Reference index for each firewall rule.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.1
ipFwAccSrcAddr
The source address in the firewall rule.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2021.13.1.1.1.2
ipFwAccSrcNetMask
The netmask of the source address in the firewall rule.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2021.13.1.1.1.3
ipFwAccDstAddr
The destination address in the firewall rule.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2021.13.1.1.1.4
ipFwAccDstNetMask
The netmask of the destination address in the firewall rule.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2021.13.1.1.1.5
ipFwAccViaName
The name of the interface to which the rule applies. If no
interface is associated with the present rule, this should
contain a dash (-).
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.2021.13.1.1.1.6
ipFwAccViaAddr
The address of the interface to which the rule applies.
Using this parameter makes sense when multiple addresses are
associated to the same physical interface. If not defined
for the current rule this should be set to 0.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2021.13.1.1.1.7
ipFwAccProto
The protocol(s) to which the rule applies.
Enumeration
Enumerated Values:
1other
2all
3tcp
4udp
5icmp
 .1.3.6.1.4.1.2021.13.1.1.1.8
ipFwAccBidir
Whether the rule works in both directions (i.e. with the
source and destination parts swapped) or not.
Enumeration
Enumerated Values:
1unidirectional
2bidirectional
 .1.3.6.1.4.1.2021.13.1.1.1.9
ipFwAccDir
Whether the rule applies to packets entering or exiting the
kernel.
Enumeration
Enumerated Values:
1both
2in
3out
 .1.3.6.1.4.1.2021.13.1.1.1.10
ipFwAccBytes
The number of bytes that matched this rule since the last
reset of the counters.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2021.13.1.1.1.11
ipFwAccPackets
The number of packets that matched this rule since the last
reset of the counters.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2021.13.1.1.1.12
ipFwAccNrSrcPorts
The number of ports that refer to the source address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.13
ipFwAccNrDstPorts
The number of ports that refer to the destination address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.14
ipFwAccSrcIsRange
Interpret the first two ports of the source part as
the upper and lower limit of an interval or not.
Enumeration
Enumerated Values:
1srchasrange
2srchasnorange
 .1.3.6.1.4.1.2021.13.1.1.1.15
ipFwAccDstIsRange
Interpret the first two ports of the destination part as
the upper and lower limit of an interval or not.
Enumeration
Enumerated Values:
1dsthasrange
2dsthasnorange
 .1.3.6.1.4.1.2021.13.1.1.1.16
ipFwAccPort1
Port number 1.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.17
ipFwAccPort2
Port number 2.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.18
ipFwAccPort3
Port number 3.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.19
ipFwAccPort4
Port number 4.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.20
ipFwAccPort5
Port number 5.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.21
ipFwAccPort6
Port number 6.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.22
ipFwAccPort7
Port number 7.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.23
ipFwAccPort8
Port number 8.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.24
ipFwAccPort9
Port number 9.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.25
ipFwAccPort10
Port number 10.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2021.13.1.1.1.26