ipFwAccDstIsRange
UCD-IPFWACC-MIB ·
.1.3.6.1.4.1.2021.13.1.1.1.16
Object
column
Enumeration
Interpret the first two ports of the destination part as the upper and lower limit of an interval or not.
Context
- MIB
- UCD-IPFWACC-MIB
- OID
.1.3.6.1.4.1.2021.13.1.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ipFwAccEntry
- Table
- ipFwAccTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | dsthasrange |
2 | dsthasnorange |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipFwAccIndex Reference index for each firewall rule. | column | Integer32 | .1.3.6.1.4.1.2021.13.1.1.1.1 |
| ipFwAccDir Whether the rule applies to packets entering or exiting the
kernel. | column | Enumeration | .1.3.6.1.4.1.2021.13.1.1.1.10 |
| ipFwAccBytes The number of bytes that matched this rule since the last
reset of the counters. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2021.13.1.1.1.11 |
| ipFwAccPackets The number of packets that matched this rule since the last
reset of the counters. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2021.13.1.1.1.12 |
| ipFwAccNrSrcPorts The number of ports that refer to the source address. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.13 |
| ipFwAccNrDstPorts The number of ports that refer to the destination address. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.14 |
| ipFwAccSrcIsRange Interpret the first two ports of the source part as
the upper and lower limit of an interval or not. | column | Enumeration | .1.3.6.1.4.1.2021.13.1.1.1.15 |
| ipFwAccPort1 Port number 1. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.17 |
| ipFwAccPort2 Port number 2. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.18 |
| ipFwAccPort3 Port number 3. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.19 |
| ipFwAccSrcAddr The source address in the firewall rule. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2021.13.1.1.1.2 |
| ipFwAccPort4 Port number 4. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.20 |
| ipFwAccPort5 Port number 5. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.21 |
| ipFwAccPort6 Port number 6. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.22 |
| ipFwAccPort7 Port number 7. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.23 |
| ipFwAccPort8 Port number 8. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.24 |
| ipFwAccPort9 Port number 9. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.25 |
| ipFwAccPort10 Port number 10. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2021.13.1.1.1.26 |
| ipFwAccSrcNetMask The netmask of the source address in the firewall rule. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2021.13.1.1.1.3 |
| ipFwAccDstAddr The destination address in the firewall rule. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2021.13.1.1.1.4 |
| ipFwAccDstNetMask The netmask of the destination address in the firewall rule. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2021.13.1.1.1.5 |
| ipFwAccViaName The name of the interface to which the rule applies. If no
interface is associated with the present rule, this should
contain a dash (-). | column | OctetString | .1.3.6.1.4.1.2021.13.1.1.1.6 |
| ipFwAccViaAddr The address of the interface to which the rule applies.
Using this parameter makes sense when multiple addresses are
associated to the same physical interface. If not defined
for … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2021.13.1.1.1.7 |
| ipFwAccProto The protocol(s) to which the rule applies. | column | Enumeration | .1.3.6.1.4.1.2021.13.1.1.1.8 |
| ipFwAccBidir Whether the rule works in both directions (i.e. with the
source and destination parts swapped) or not. | column | Enumeration | .1.3.6.1.4.1.2021.13.1.1.1.9 |