atmConfVpCCOperStatus
RAD-NtePrtCo-MIB ·
.1.3.6.1.4.1.164.12.3.2.1.3.1.9
Object
column
Enumeration
initial(1) - The CC activation process is not started.
source(4) - Agent sends OAM CC cells.
sink(5) - Agent checks received OAM CC cells.
both (8) - OAM CC of local and remote agents activation.
timeout (9) - Timeout occured on receiving answer from
the remote agent.
denied (10) - CC activation process rejected by remote agent.
conflict (11) - local and remote sides requested activation
simultaneously.
manual (12) - OAM CC of local agent activated manually.
Context
- MIB
- RAD-NtePrtCo-MIB
- OID
.1.3.6.1.4.1.164.12.3.2.1.3.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- atmNteConfVpEntry
- Table
- atmNteConfVpTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | initial |
4 | source |
5 | sink |
8 | both |
9 | timeout |
10 | denied |
11 | conflict |
12 | manual |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmConfVpPolicing Policing method desired for this VPL. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.1 |
| atmConfVpLoopbackTraffic This parameter has both command and status meanings:
off(2) - Set to 'Off' will Stop traffic loop. Getting this
value means that the loop is not running.
on (3) - Set to … | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.10 |
| atmConfVpLoopbackFailureInd This object allows user to define the Indication that will be created upon
a LB cell failure.
disabled(2) - no indication will be created.
segmentAis(3) - will cause Tx of a segme… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.11 |
| atmConfVpLoopbackFailureThreshold The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd.
Range: 1..16. Default: 1. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.3.1.12 |
| atmConfVpOamDirection The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream.
upStream(3) - The OAM cell will be inserted in upStream. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.13 |
| atmConfVpOamDescrIndex This parameter indicates the VPL's OAM Descriptor index,
according to the OAM Descriptor Configuration Table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.2.1.3.1.14 |
| atmConfVpConnected This object indicates whether this VP is connected
and if connected, what is it connected to. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.15 |
| atmConfVpCCAdminStatus up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC.
source(4) - Activate OAM CC(Continuity Check) of local agent
( start sending Oam cells to the remot… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.2 |
| atmConfVpLoopbackAdminStatus up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells.
For ace2002:
up(2) - Transmitting LB cells with llid all ones
(i.e. FFFF..F… | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.3 |
| atmConfVpLoopbackSinkAddress Destination address.
For ace101: 2 bytes are used.
For ace2002: 16 bytes are used. | column | OctetString | .1.3.6.1.4.1.164.12.3.2.1.3.1.4 |
| atmConfVpCongestionControl Each bit indicates a selection of one option
as the following description. All combinations
are possible and legal.
The codes are:
1 - EPD
2 - CLP
4 - EFCI | column | OctetString | .1.3.6.1.4.1.164.12.3.2.1.3.1.5 |
| atmConfVpCCDirection both(2) - Agent send OAM CC cells and check received OAM CC cells
source(4)- Agent send OAM CC cells.
sink(5) - Agent checks received OAM CC cells. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.6 |
| atmConfVpCreationTime A date-time in which the VP was created. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.164.12.3.2.1.3.1.7 |
| atmConfVpOamSupport OAM support mode, which determines the device location
in a segment wise. | column | Enumeration | .1.3.6.1.4.1.164.12.3.2.1.3.1.8 |