atmNteConfVpEntry

RAD-NtePrtCo-MIB · .1.3.6.1.4.1.164.12.3.2.1.3.1

MIB view Table view

Object

row

An entry in the ATM VP configuration table.
ifIndex of the ATM layer.

Context

MIB: RAD-NtePrtCo-MIB
OID: .1.3.6.1.4.1.164.12.3.2.1.3.1
Type: row
Status: current
Parent: atmNteConfVpTable
Table: atmNteConfVpTable
Children: 15

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
atmConfVpPolicing Policing method desired for this VPL.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.1`
atmConfVpLoopbackTraffic This parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3) - Set to …	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.10`
atmConfVpLoopbackFailureInd This object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will cause Tx of a segme…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.11`
atmConfVpLoopbackFailureThreshold The number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.3.1.12`
atmConfVpOamDirection The direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.13`
atmConfVpOamDescrIndex This parameter indicates the VPL's OAM Descriptor index, according to the OAM Descriptor Configuration Table.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.2.1.3.1.14`
atmConfVpConnected This object indicates whether this VP is connected and if connected, what is it connected to.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.15`
atmConfVpCCAdminStatus up(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the remot…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.2`
atmConfVpLoopbackAdminStatus up(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..F…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.3`
atmConfVpLoopbackSinkAddress Destination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used.	column	OctetString	`.1.3.6.1.4.1.164.12.3.2.1.3.1.4`
atmConfVpCongestionControl Each bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI	column	OctetString	`.1.3.6.1.4.1.164.12.3.2.1.3.1.5`
atmConfVpCCDirection both(2) - Agent send OAM CC cells and check received OAM CC cells source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.6`
atmConfVpCreationTime A date-time in which the VP was created.	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.164.12.3.2.1.3.1.7`
atmConfVpOamSupport OAM support mode, which determines the device location in a segment wise.	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.8`
atmConfVpCCOperStatus initial(1) - The CC activation process is not started. source(4) - Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC cells. both (8) - OAM CC of local and remot…	column	Enumeration	`.1.3.6.1.4.1.164.12.3.2.1.3.1.9`

Indexes

Object	Type	Syntax	OID
IF-MIBifIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remai…	column	InterfaceIndex	`.1.3.6.1.2.1.2.2.1.1`
ATM-MIBatmVplVpi The VPI value of the VPL.	column	ATM-TC-MIBAtmVpIdentifier	`.1.3.6.1.2.1.37.1.6.1.1`