eoACPwrAttributesEntry

POWER-ATTRIBUTES-MIB · .1.3.6.1.2.1.230.1.1.1

MIB view Table view

Object

row

This is a sparse extension of the eoPowerTable with
entries for power attributes measurements or
configuration.  Each measured value corresponds to an
attribute in IEC 61850-7-4 for non-phase measurements
within the object MMXN.

Context

MIB: POWER-ATTRIBUTES-MIB
OID: .1.3.6.1.2.1.230.1.1.1
Type: row
Status: current
Parent: eoACPwrAttributesTable
Table: eoACPwrAttributesTable
Children: 12

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
eoACPwrAttributesConfiguration Configuration describes the physical configurations of the power supply lines: * alternating current, single phase (SNGL) * alternating current, three-phase d…	column	Enumeration	`.1.3.6.1.2.1.230.1.1.1.1`
eoACPwrAttributesTotalPowerFactor A measured value ratio of the real power flowing to the load versus the apparent power. It is dimensionless and expressed here as a percentage value in hundredths. A power facto…	column	hundredths Integer32	`.1.3.6.1.2.1.230.1.1.1.10`
eoACPwrAttributesThdCurrent A calculated value for the current total harmonic distortion (THD). Method of calculation is not specified. IEC 61850-7-4 attribute 'ThdAmp'.	column	hundredths of percent Integer32	`.1.3.6.1.2.1.230.1.1.1.11`
eoACPwrAttributesThdVoltage A calculated value for the voltage total harmonic distortion (THD). The method of calculation is not specified. IEC 61850-7-4 attribute 'ThdVol'.	column	hundredths of percent Integer32	`.1.3.6.1.2.1.230.1.1.1.12`
eoACPwrAttributesAvgVoltage A measured value for average of the voltage measured over an integral number of AC cycles. For a three-phase system, this is the average voltage (V1+V2+V3)/3. IEC 61850-7-4 meas…	column	0.1 Volt AC SNMPv2-SMIInteger32	`.1.3.6.1.2.1.230.1.1.1.2`
eoACPwrAttributesAvgCurrent A measured value for average of the current measured over an integral number of AC cycles. For a three-phase system, this is the average current (I1+I2+I3)/3. IEC 61850-7-4 attr…	column	amperes SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.230.1.1.1.3`
eoACPwrAttributesFrequency A measured value for the basic frequency of the AC circuit. IEC 61850-7-4 attribute 'Hz'.	column	0.01 hertz Integer32	`.1.3.6.1.2.1.230.1.1.1.4`
eoACPwrAttributesPowerUnitMultiplier The magnitude of watts for the usage value in eoACPwrAttributesTotalActivePower, eoACPwrAttributesTotalReactivePower, and eoACPwrAttributesTotalApparentPower measurements. For thr…	column	ENERGY-OBJECT-MIBUnitMultiplier	`.1.3.6.1.2.1.230.1.1.1.5`
eoACPwrAttributesPowerAccuracy This object indicates a percentage value, in hundredths of a percent, representing the presumed accuracy of active, reactive, and apparent power usage reporting. For example, 101…	column	hundredths of percent Integer32	`.1.3.6.1.2.1.230.1.1.1.6`
eoACPwrAttributesTotalActivePower A measured value of the actual power delivered to or consumed by the load. IEC 61850-7-4 attribute 'TotW'.	column	watts SNMPv2-SMIInteger32	`.1.3.6.1.2.1.230.1.1.1.7`
eoACPwrAttributesTotalReactivePower A measured value of the reactive portion of the apparent power. IEC 61850-7-4 attribute 'TotVAr'.	column	volt-amperes reactive SNMPv2-SMIInteger32	`.1.3.6.1.2.1.230.1.1.1.8`
eoACPwrAttributesTotalApparentPower A measured value of the voltage and current that determines the apparent power. The apparent power is the vector sum of real and reactive power. Note: watts and vo…	column	volt-amperes SNMPv2-SMIInteger32	`.1.3.6.1.2.1.230.1.1.1.9`

Indexes