eamSignalingVariantsOverrideDefault

MX-EAM-MIB · .0.1880.1.100.200.1.200
MIB view Table view

Object

column r/w MX-TCMxEnableState 
Override Default
              
Overrides the default settings of E&M Signaling parameters
for the SignalingType and InterfaceName.
              
  * Disable: The interface uses the default configuration
    associated with the selected Signaling Type. The
    configuration set in the current row has no effect on the
    default configuration of the selected Signaling Type.
    Refer to the technical documentation to get the default
    configurations of the various Signaling Types.
  * Enable: The interface uses the specific signaling
    configuration as defined in the current row. To retrieve
    the default configuration associated with the current
    Signaling Type, the command implemented by the
    ResetSpecific parameter MUST be issued.

Context

MIB
MX-EAM-MIB
OID
.0.1880.1.100.200.1.200
Type
column
Access
readwrite
Status
current
Parent
eamSignalingVariantsEntry
Table
eamSignalingVariantsTable
Siblings
13

Syntax

MX-TCMxEnableState
Source
MX-TCMxEnableState
Base type
Enumeration

Values & Constraints

Type Values
0disable
1enable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
eamSignalingVariantsInterfaceName
Interface Name Identifies the interface.
columnOctetString.0.1880.1.100.200.1.100
eamSignalingVariantsWaitWink
Wait Wink Defines whether or not the outgoing register should wait for a wink before proceeding with digit transmission.
columnMX-TCMxEnableState.0.1880.1.100.200.1.1000
eamSignalingVariantsWaitWinkAck
Wait Wink Ack Defines whether or not the outgoing register should wait for a wink acknowledge after all digit reception.
columnMX-TCMxEnableState.0.1880.1.100.200.1.1100
eamSignalingVariantsSendWink
Send Wink Defines whether or not the incoming register should send a wink to notify the remote side that digit information can be sent.
columnMX-TCMxEnableState.0.1880.1.100.200.1.1200
eamSignalingVariantsSendWinkAck
Send Wink Ack Defines whether or not the incoming register should send a wink to acknowledge the receipt of all digits.
columnMX-TCMxEnableState.0.1880.1.100.200.1.1300
eamSignalingVariantsResetSpecific
Reset Specific Resets specific settings of E&M Signaling parameters with the default signaling settings. This command is used to retrieve the default configuration …
columnEnumeration.0.1880.1.100.200.1.2000
eamSignalingVariantsBitsBCD
BCD Bits Settings of the B, C and D bits when the device transmits line signals. B, C and D bits of received line signals are ignored by the device. …
columnInteger32.0.1880.1.100.200.1.300
eamSignalingVariantsDnisLength
DNIS Length Defines the expected length of the DNIS. DNIS (Dialed Number Identification Service) is the called party or the destination number. * 0…
columnUnsigned32.0.1880.1.100.200.1.400
eamSignalingVariantsAniLength
ANI Length Defines the expected length of the ANI. ANI (Automatic Number Identification) is the number of the calling party. * 0 : Variable ANI len…
columnUnsigned32.0.1880.1.100.200.1.500
eamSignalingVariantsIncomingRegisterSignaling
Incoming Register Signaling Defines the incoming register signaling method. * MfR1: Multi Frequency - R1. * Dtmf: Dual Tone Multi Frequency.
columnEnumeration.0.1880.1.100.200.1.600
eamSignalingVariantsOutgoingRegisterSignaling
Outgoing Register Signaling Defines the outgoing register signaling method. * MfR1: Multi Frequency - R1. * Dtmf: Dual Tone Multi Frequency.
columnEnumeration.0.1880.1.100.200.1.700
eamSignalingVariantsIncomingDialMap
Incoming Dial Map Defines the dial map expression to match against on the incoming side. The dial map expression uses a special format using macros that enables the…
columnOctetString.0.1880.1.100.200.1.800
eamSignalingVariantsOutgoingDialMap
Outgoing Dial Map Defines the dial map format for the outgoing dial string. The dial string generation uses a special format using macros that enables the user to c…
columnOctetString.0.1880.1.100.200.1.900