eamSignalingVariantsEntry
MX-EAM-MIB ·
.0.1880.1.100.200.1
Object
row
A row in table E&M Signaling Variants.
Context
- MIB
- MX-EAM-MIB
- OID
.0.1880.1.100.200.1- Type
- row
- Status
- current
- Parent
- eamSignalingVariantsTable
- Table
- eamSignalingVariantsTable
- Children
- 14
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eamSignalingVariantsInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1880.1.100.200.1.100 |
| eamSignalingVariantsWaitWink Wait Wink
Defines whether or not the outgoing register should wait for
a wink before proceeding with digit transmission. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1000 |
| eamSignalingVariantsWaitWinkAck Wait Wink Ack
Defines whether or not the outgoing register should wait for
a wink acknowledge after all digit reception. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1100 |
| eamSignalingVariantsSendWink Send Wink
Defines whether or not the incoming register should send a
wink to notify the remote side that digit information can be
sent. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1200 |
| eamSignalingVariantsSendWinkAck Send Wink Ack
Defines whether or not the incoming register should send a
wink to acknowledge the receipt of all digits. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1300 |
| eamSignalingVariantsOverrideDefault Override Default
Overrides the default settings of E&M Signaling parameters
for the SignalingType and InterfaceName.
* Disable: The interface uses … | column | MX-TCMxEnableState | .0.1880.1.100.200.1.200 |
| eamSignalingVariantsResetSpecific Reset Specific
Resets specific settings of E&M Signaling parameters with the
default signaling settings. This command is used to retrieve
the default configuration … | column | Enumeration | .0.1880.1.100.200.1.2000 |
| eamSignalingVariantsBitsBCD BCD Bits
Settings of the B, C and D bits when the device transmits
line signals. B, C and D bits of received line signals are
ignored by the device.
… | column | Integer32 | .0.1880.1.100.200.1.300 |
| eamSignalingVariantsDnisLength DNIS Length
Defines the expected length of the DNIS. DNIS (Dialed Number
Identification Service) is the called party or the
destination number.
* 0… | column | Unsigned32 | .0.1880.1.100.200.1.400 |
| eamSignalingVariantsAniLength ANI Length
Defines the expected length of the ANI. ANI (Automatic Number
Identification) is the number of the calling party.
* 0 : Variable ANI len… | column | Unsigned32 | .0.1880.1.100.200.1.500 |
| eamSignalingVariantsIncomingRegisterSignaling Incoming Register Signaling
Defines the incoming register signaling method.
* MfR1: Multi Frequency - R1.
* Dtmf: Dual Tone Multi Frequency. | column | Enumeration | .0.1880.1.100.200.1.600 |
| eamSignalingVariantsOutgoingRegisterSignaling Outgoing Register Signaling
Defines the outgoing register signaling method.
* MfR1: Multi Frequency - R1.
* Dtmf: Dual Tone Multi Frequency. | column | Enumeration | .0.1880.1.100.200.1.700 |
| eamSignalingVariantsIncomingDialMap Incoming Dial Map
Defines the dial map expression to match against on the
incoming side. The dial map expression uses a special format
using macros that enables the… | column | OctetString | .0.1880.1.100.200.1.800 |
| eamSignalingVariantsOutgoingDialMap Outgoing Dial Map
Defines the dial map format for the outgoing dial string. The
dial string generation uses a special format using macros
that enables the user to c… | column | OctetString | .0.1880.1.100.200.1.900 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| eamSignalingVariantsInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1880.1.100.200.1.100 |