eamSignalingVariantsIncomingDialMap
MX-EAM-MIB ·
.0.1880.1.100.200.1.800
Object
column
r/w
OctetString
Incoming Dial Map
Defines the dial map expression to match against on the
incoming side. The dial map expression uses a special format
using macros that enables the user to construct a custom dial
map using the ANI, DNIS and other special tones as separator.
Dial map macros:
* %dnis : DNIS (Dialed Number Identification Service).
* %ani : ANI (Automatic Number Identification).
* %kp : KP (start-of-pulsing) tone (MF R1 only).
* %st : ST (end-of-pulsing) tone (MF R1 only).
* %t : Interdigit timeout.
* A,B,C,D,*,# : Control tones (DTMF only).
* A,B,C,D,E : Control tones (MF R1 only).
Examples:
* %dnis*%ani : (dnis)*(ani)
* %kp%dnis%st%kp%ani%st : KP(dnis)STKP(ani)ST
* A%dnisBA%aniB : A(dnis)BA(ani)B
Context
- MIB
- MX-EAM-MIB
- OID
.0.1880.1.100.200.1.800- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eamSignalingVariantsEntry
- Table
- eamSignalingVariantsTable
- Siblings
- 13
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eamSignalingVariantsInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1880.1.100.200.1.100 |
| eamSignalingVariantsWaitWink Wait Wink
Defines whether or not the outgoing register should wait for
a wink before proceeding with digit transmission. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1000 |
| eamSignalingVariantsWaitWinkAck Wait Wink Ack
Defines whether or not the outgoing register should wait for
a wink acknowledge after all digit reception. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1100 |
| eamSignalingVariantsSendWink Send Wink
Defines whether or not the incoming register should send a
wink to notify the remote side that digit information can be
sent. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1200 |
| eamSignalingVariantsSendWinkAck Send Wink Ack
Defines whether or not the incoming register should send a
wink to acknowledge the receipt of all digits. | column | MX-TCMxEnableState | .0.1880.1.100.200.1.1300 |
| eamSignalingVariantsOverrideDefault Override Default
Overrides the default settings of E&M Signaling parameters
for the SignalingType and InterfaceName.
* Disable: The interface uses … | column | MX-TCMxEnableState | .0.1880.1.100.200.1.200 |
| eamSignalingVariantsResetSpecific Reset Specific
Resets specific settings of E&M Signaling parameters with the
default signaling settings. This command is used to retrieve
the default configuration … | column | Enumeration | .0.1880.1.100.200.1.2000 |
| eamSignalingVariantsBitsBCD BCD Bits
Settings of the B, C and D bits when the device transmits
line signals. B, C and D bits of received line signals are
ignored by the device.
… | column | Integer32 | .0.1880.1.100.200.1.300 |
| eamSignalingVariantsDnisLength DNIS Length
Defines the expected length of the DNIS. DNIS (Dialed Number
Identification Service) is the called party or the
destination number.
* 0… | column | Unsigned32 | .0.1880.1.100.200.1.400 |
| eamSignalingVariantsAniLength ANI Length
Defines the expected length of the ANI. ANI (Automatic Number
Identification) is the number of the calling party.
* 0 : Variable ANI len… | column | Unsigned32 | .0.1880.1.100.200.1.500 |
| eamSignalingVariantsIncomingRegisterSignaling Incoming Register Signaling
Defines the incoming register signaling method.
* MfR1: Multi Frequency - R1.
* Dtmf: Dual Tone Multi Frequency. | column | Enumeration | .0.1880.1.100.200.1.600 |
| eamSignalingVariantsOutgoingRegisterSignaling Outgoing Register Signaling
Defines the outgoing register signaling method.
* MfR1: Multi Frequency - R1.
* Dtmf: Dual Tone Multi Frequency. | column | Enumeration | .0.1880.1.100.200.1.700 |
| eamSignalingVariantsOutgoingDialMap Outgoing Dial Map
Defines the dial map format for the outgoing dial string. The
dial string generation uses a special format using macros
that enables the user to c… | column | OctetString | .0.1880.1.100.200.1.900 |