mplsLdpEntityTargetPeer
MPLS-LDP-STD-MIB ·
.1.3.6.1.2.1.10.166.4.1.2.3.1.17
Object
If this LDP entity uses targeted peer then set this to true.
Context
- MIB
- MPLS-LDP-STD-MIB
- OID
.1.3.6.1.2.1.10.166.4.1.2.3.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsLdpEntityEntry
- Table
- mplsLdpEntityTable
- Siblings
- 22
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsLdpEntityLdpId The LDP identifier. | column | MPLS-TC-STD-MIBMplsLdpIdentifier | .1.3.6.1.2.1.10.166.4.1.2.3.1.1 |
| mplsLdpEntityHelloHoldTimer The 16-bit integer value which is the proposed Hello
hold timer for this LDP Entity. The Hello Hold time
in seconds.
An LSR maintains a record of Hellos received
fr… | column | seconds Unsigned32 | .1.3.6.1.2.1.10.166.4.1.2.3.1.10 |
| mplsLdpEntityInitSessionThreshold When attempting to establish a session with
a given Peer, the given LDP Entity should
send out the SNMP notification,
'mplsLdpInitSessionThresholdExceeded', when
the number of Ses… | column | Integer32 | .1.3.6.1.2.1.10.166.4.1.2.3.1.11 |
| mplsLdpEntityLabelDistMethod For any given LDP session, the method of
label distribution must be specified. | column | MPLS-TC-STD-MIBMplsLabelDistributionMethod | .1.3.6.1.2.1.10.166.4.1.2.3.1.12 |
| mplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either
conservative or liberal label retention mode.
If the value of this object is conservative(1)
then advertized label ma… | column | MPLS-TC-STD-MIBMplsRetentionMode | .1.3.6.1.2.1.10.166.4.1.2.3.1.13 |
| mplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then
Loop Detection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection… | column | Integer32 | .1.3.6.1.2.1.10.166.4.1.2.3.1.14 |
| mplsLdpEntityHopCountLimit If the value of this object is 0 (zero),
then Loop Detection using Hop Counters is
disabled.
If the value of this object is greater than
0 (zero) then Loop Detectio… | column | Integer32 | .1.3.6.1.2.1.10.166.4.1.2.3.1.15 |
| mplsLdpEntityTransportAddrKind This specifies whether the loopback or interface
address is to be used as the transport address
in the transport address TLV of the
hello message.
If the value is i… | column | Enumeration | .1.3.6.1.2.1.10.166.4.1.2.3.1.16 |
| mplsLdpEntityTargetPeerAddrType The type of the internetwork layer address used for
the Extended Discovery. This object indicates how
the value of mplsLdpEntityTargetPeerAddr is to
be interpreted. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.10.166.4.1.2.3.1.18 |
| mplsLdpEntityTargetPeerAddr The value of the internetwork layer address
used for the Extended Discovery. The value of
mplsLdpEntityTargetPeerAddrType specifies how
this address is to be interpreted. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.10.166.4.1.2.3.1.19 |
| mplsLdpEntityIndex This index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'mplsLdpEntityIndexNext' object should be retrieved.
That value sh… | column | DIFFSERV-MIBIndexInteger | .1.3.6.1.2.1.10.166.4.1.2.3.1.2 |
| mplsLdpEntityLabelType Specifies the optional parameters for the LDP
Initialization Message.
If the value is generic(1) then no
optional parameters will be sent in
the LDP Initialization … | column | MPLS-TC-STD-MIBMplsLdpLabelType | .1.3.6.1.2.1.10.166.4.1.2.3.1.20 |
| mplsLdpEntityDiscontinuityTime The value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity. The relevant counters
are the specific instances a… | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.10.166.4.1.2.3.1.21 |
| mplsLdpEntityStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent(4)'
need not allow write-access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.166.4.1.2.3.1.22 |
| mplsLdpEntityRowStatus The status of this conceptual row. All writable
objects in this row may be modified at any
time, however, as described in detail in
the section entitled, 'Changing Values After
S… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.166.4.1.2.3.1.23 |
| mplsLdpEntityProtocolVersion The version number of the LDP protocol which will be
used in the session initialization message.
Section 3.5.3 in the LDP Specification specifies
that the version o… | column | Unsigned32 | .1.3.6.1.2.1.10.166.4.1.2.3.1.3 |
| mplsLdpEntityAdminStatus The administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already attempted to establish
contact with a Peer, then all… | column | Enumeration | .1.3.6.1.2.1.10.166.4.1.2.3.1.4 |
| mplsLdpEntityOperStatus The operational status of this LDP Entity.
The value of unknown(1) indicates that the
operational status cannot be determined at
this time. The value of unknown sh… | column | Enumeration | .1.3.6.1.2.1.10.166.4.1.2.3.1.5 |
| mplsLdpEntityTcpPort The TCP Port for
LDP. The default value is the well-known
value of this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.10.166.4.1.2.3.1.6 |
| mplsLdpEntityUdpDscPort The UDP Discovery Port for
LDP. The default value is the
well-known value for this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.10.166.4.1.2.3.1.7 |
| mplsLdpEntityMaxPduLength The maximum PDU Length that is sent in
the Common Session Parameters of an Initialization
Message. According to the LDP Specification [RFC3036]
a value of 255 or less specifies th… | column | octets Unsigned32 | .1.3.6.1.2.1.10.166.4.1.2.3.1.8 |
| mplsLdpEntityKeepAliveHoldTimer The 16-bit integer value which is the proposed keep
alive hold timer for this LDP Entity. | column | seconds Unsigned32 | .1.3.6.1.2.1.10.166.4.1.2.3.1.9 |