mplsLdpEntityHopCountLimit

MPLS-LDP-STD-MIB · .1.3.6.1.2.1.10.166.4.1.2.3.1.15
MIB view Table view

Object

column r/w Integer32 
If the value of this object is 0 (zero),
then Loop Detection using Hop Counters is
disabled.
              
If the value of this object is greater than
0 (zero) then Loop Detection using Hop
Counters is enabled, and this object
specifies this Entity's maximum allowable
value for the Hop Count.
Also, the value of the object
mplsLdpLsrLoopDetectionCapable must be set
to either 'hopCount(3)' or
'hopCountAndPathVector(5)' if this object
has a value greater than 0 (zero), otherwise
it is ignored.

Context

MIB
MPLS-LDP-STD-MIB
OID
.1.3.6.1.2.1.10.166.4.1.2.3.1.15
Type
column
Access
readwrite
Status
current
Parent
mplsLdpEntityEntry
Table
mplsLdpEntityTable
Siblings
22

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mplsLdpEntityLdpId
The LDP identifier.
columnMPLS-TC-STD-MIBMplsLdpIdentifier.1.3.6.1.2.1.10.166.4.1.2.3.1.1
mplsLdpEntityHelloHoldTimer
The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received fr…
columnseconds Unsigned32.1.3.6.1.2.1.10.166.4.1.2.3.1.10
mplsLdpEntityInitSessionThreshold
When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'mplsLdpInitSessionThresholdExceeded', when the number of Ses…
columnInteger32.1.3.6.1.2.1.10.166.4.1.2.3.1.11
mplsLdpEntityLabelDistMethod
For any given LDP session, the method of label distribution must be specified.
columnMPLS-TC-STD-MIBMplsLabelDistributionMethod.1.3.6.1.2.1.10.166.4.1.2.3.1.12
mplsLdpEntityLabelRetentionMode
The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label ma…
columnMPLS-TC-STD-MIBMplsRetentionMode.1.3.6.1.2.1.10.166.4.1.2.3.1.13
mplsLdpEntityPathVectorLimit
If the value of this object is 0 (zero) then Loop Detection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection…
columnInteger32.1.3.6.1.2.1.10.166.4.1.2.3.1.14
mplsLdpEntityTransportAddrKind
This specifies whether the loopback or interface address is to be used as the transport address in the transport address TLV of the hello message. If the value is i…
columnEnumeration.1.3.6.1.2.1.10.166.4.1.2.3.1.16
mplsLdpEntityTargetPeer
If this LDP entity uses targeted peer then set this to true.
columnSNMPv2-TCTruthValue.1.3.6.1.2.1.10.166.4.1.2.3.1.17
mplsLdpEntityTargetPeerAddrType
The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of mplsLdpEntityTargetPeerAddr is to be interpreted.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.2.1.10.166.4.1.2.3.1.18
mplsLdpEntityTargetPeerAddr
The value of the internetwork layer address used for the Extended Discovery. The value of mplsLdpEntityTargetPeerAddrType specifies how this address is to be interpreted.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.2.1.10.166.4.1.2.3.1.19
mplsLdpEntityIndex
This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'mplsLdpEntityIndexNext' object should be retrieved. That value sh…
columnDIFFSERV-MIBIndexInteger.1.3.6.1.2.1.10.166.4.1.2.3.1.2
mplsLdpEntityLabelType
Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will be sent in the LDP Initialization …
columnMPLS-TC-STD-MIBMplsLdpLabelType.1.3.6.1.2.1.10.166.4.1.2.3.1.20
mplsLdpEntityDiscontinuityTime
The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. The relevant counters are the specific instances a…
columnSNMPv2-TCTimeStamp.1.3.6.1.2.1.10.166.4.1.2.3.1.21
mplsLdpEntityStorageType
The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.2.1.10.166.4.1.2.3.1.22
mplsLdpEntityRowStatus
The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After S…
columnSNMPv2-TCRowStatus.1.3.6.1.2.1.10.166.4.1.2.3.1.23
mplsLdpEntityProtocolVersion
The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specification specifies that the version o…
columnUnsigned32.1.3.6.1.2.1.10.166.4.1.2.3.1.3
mplsLdpEntityAdminStatus
The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer, then all…
columnEnumeration.1.3.6.1.2.1.10.166.4.1.2.3.1.4
mplsLdpEntityOperStatus
The operational status of this LDP Entity. The value of unknown(1) indicates that the operational status cannot be determined at this time. The value of unknown sh…
columnEnumeration.1.3.6.1.2.1.10.166.4.1.2.3.1.5
mplsLdpEntityTcpPort
The TCP Port for LDP. The default value is the well-known value of this port.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.2.1.10.166.4.1.2.3.1.6
mplsLdpEntityUdpDscPort
The UDP Discovery Port for LDP. The default value is the well-known value for this port.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.2.1.10.166.4.1.2.3.1.7
mplsLdpEntityMaxPduLength
The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specification [RFC3036] a value of 255 or less specifies th…
columnoctets Unsigned32.1.3.6.1.2.1.10.166.4.1.2.3.1.8
mplsLdpEntityKeepAliveHoldTimer
The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity.
columnseconds Unsigned32.1.3.6.1.2.1.10.166.4.1.2.3.1.9